Abstract:Mesoporous carbon materials with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2,3-dihydroxynaphthalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)(2)center dot 6H(2)O] solution in 2-propanol, which was added to the carbon-silica nanocomposite prior to thermal treatment. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 degrees C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM), and in situ electron diffraction X-ray spectroscopy (EDX). While TG analysis revealed carbon contents lower than 30 wt.-%, nitrogen adsorption provided information about the homogeneity of the carbon thin film deposited onto the mesopore walls of the ordered silica templates SBA-15. The templates, carbon-silica nanocomposites, and carbon inverse replicas with nickel nanoparticles exhibit uniform pores, high surface areas, and large pore volumes. Partially graphitic carbon was identified by the presence of a characteristic G band in the Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD. The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles are uniform in size, ca. 3 nm, and are homogeneously dispersed on the tubular carbon walls. A few larger clusters of nickel, ca. 60 nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles are largely composed of Ni with traces of NiO. Similar nanoparticle dispersions have been reported only for Ni-containing multiwalled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbon materials, CMK-3, possess larger Ni/NiO nanoparticles. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

Scalable Synthesis Of Mono-Dispersed Nickel Nanoparticles And Their Application As Thermal Conductive Fillers

Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Mille-Feuille Inspired Thermally Conductive Polymer Nanocomposites with Overlapping BN Nanosheets for Thermal Management Applications.

A facile method to fabricate water-dispersible hetero-structured AuNPs@BNNS hybrid filler and its application for enhancing thermal conductivity

Scalable Production of Carbon Encapsulated Ni Nanoparticles by Water Arc Discharge: Structural and Magnetic Properties

Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

Alternative Metallic Fillers for the Preparation of Conductive Nanoinks for Sustainable Electronics

Sacrificial Template Synthesis of Hierarchical Nickel Hydroxidenitrate Hollow Colloidal Particles for Electrochemical Energy Storage

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Modeling of Smoothening Effect on Morphologies of Annealed Submicron Nickel Particles Used for Electrically Conductive Adhesives

Phase-controlled Synthesis of Nickel Silicide Nanostructures

Scalable synthesis of the mono-dispersed silver micro-dendrites and their applications in the ultralow cost printed electrically conductive adhesives

Excellent Low‐Frequency Microwave Absorption and High Thermal Conductivity in Polydimethylsiloxane Composites Endowed by Hydrangea‐Like CoNi@BN Heterostructure Fillers

Fabrication of monodispersed nickel flower-like architectures via a solvent-thermal process and analysis of their magnetic and electromagnetic properties

Bioinspired Functional Composites for Enhanced Thermally Conductivity via Fractal-Growth CuNP Fillers

Scalable Synthesis of Monodispersed Branched Submicron Silver Particles As the Printed Electrically Conductive Adhesives Fillers

Fabrication of highly conducting nickel-coated graphite composite particles with low Ni content for excellent electromagnetic properties

Enhancement of in-plane thermal conductivity of flexible boron nitride heat spreaders by micro/nanovoid filling using deformable liquid metal nanoparticles

Facile Preparation of Polymer-Based Heat Dissipation Composite Coating with Enhanced Thermal Conductivity Via Optimizing Synergistic Effect of Multi-Scale Fillers

Near‐Theoretical Thermal Conductivity Silver Nanoflakes as Reinforcements in Gap‐Filling Adhesives