Abstract:Teleoperated manipulation under the human intelligence is an effective solution to confront complicated tasks in unknown environments. However, the uncertain contact in environments is the main challenge to achieve good teleoperation, and some inevitable issues such as nonlinearities, various uncertainties, constraints, and communication delays in local and remote robots should also be taken into account. In this article, a unified contact model is proposed to be the targeted environment interaction for remote robot, which can cover various conditions such as free motion and rigid contact by setting different model parameters. Subsequently, a hybrid motion/force controller is developed to cope with nonlinearities and various uncertainties by adaptive robust technique, thus guaranteeing system stability and good transient convergence to the unified contact model. Particularly, to handle misteleoperation or sudden change of conditions described in unified contact model, a model predictive control-based contact optimization method is developed to be the outer loop of hybrid motion/force controller, which plans the desired motion and force trajectories that meet the state and targeted interaction constraints. By the estimation and transmission of environment parameter, the environment dynamics is reconstructed in the local side, which provides the effective force feedback of remote contact environment for human operator. Since the signal transmitted is replaced by the estimated environment parameter, the power-cycle in communication channel is eliminated. This design can avoid the passivity stability problem caused by communication delays, so the stability and good transparency under delays can be guaranteed by the separate design of local and remote controllers. The comparative experiments are implemented and verify the effectiveness of proposed framework for teleoperated manipulation.

Force Tracking Impedance Control with Moving Target

Variable Force Tracking Control Via Online Learning

Robust Force Tracking Impedance Control of an Ultrasonic Motor-actuated End-effector in a Soft Environment.

Force Tracking Impedance Control of Robot Manipulators Under Unknown Environment

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Adaptive variable impedance control for dynamic contact force tracking in uncertain environment

Variable Stiffness Force Tracking Impedance Control Using Differential-less Method

Constant force tracking using online stiffness and reverse damping force of variable impedance controller for robotic polishing

Smooth adaptive hybrid impedance control for robotic contact force tracking in dynamic environments

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Target Tracking Manipulation Theories for Combined Force and Position Control in Open and Closed Loop Manipulators

Force Tracking Impedance Control of Hydraulic Series Elastic Actuators Interacting with Unknown Environment

Force tracking impedance control with unknown environment at the microscale

Force tracking control for motion synchronization in human-robot collaboration

Adaptive Robust Motion and Force Tracking Control of Robot Manipulators in Contact With Compliant Surfaces With Unknown Stiffness

Adaptive Robust Motion and Force Tracking Control of Robot Manipulators in Contact with Stiff Surfaces

Real-Time Deformable-Contact-Aware Model Predictive Control for Force-Modulated Manipulation

Coupled Force–Position Control for Dynamic Contact Force Tracking in Uncertain Environment