Abstract:Mobile robotic drilling for flight control surface assembly at multiple stations demands high positioning accuracy of the equipped industrial robot. However, disturbances, arising from movement from station to station, significantly deteriorate the positioning accuracy. This paper proposes a novel in-process robot base frame calibration method with a 2D vision system. A proposal layout of flight control surface assembly, the developed mobile robotic drilling system, and the 2D vision system are first introduced. Then an iterative measurement scheme is proposed to eliminate measurement errors induced by non-perpendicularity and erroneous object distance during 2D vision-based positioning of preset reference holes. In order to obtain the third-dimension Cartesian coordinates of the reference holes, depth control with autofocus is achieved by using a new sharpness function. Based on the acquired Cartesian coordinates of the reference holes in the robot base frame, and their counterparts measured in advance in the world coordinate system, the description of the robot base frame with respect to the world coordinate system can be obtained with least-squares fitting. Numerical experiments show that depth control with autofocus contributes to enhanced accuracy of robot base frame calibration. Experiments performed on the developed mobile drilling system indicate that the maximum positioning error is about 0.6 mm with the proposed calibration method. Since position errors of drilled fastener holes will be further measured and compensated for based on the 2D vision system, the proposed in-process robot base frame calibration method is effective.

Uncalibrated Peg-Hole Alignment Using Visual Servoing

Simultaneous Tracking and Regulation Visual Servoing of Wheeled Mobile Robots with Uncalibrated Extrinsic Parameters

Visual Servoing with an Uncalibrated Eye-in-hand Camera

An Optimization Based Vision Calibration Method for PTZ Camera's Errors in Model and Execution

An adaptive ball-head positioning visual servoing method for aircraft digital assembly

Unconstrained Self-Calibration of Stereo Camera on Visually Impaired Assistance Devices.

Visual Object Servo Tracking Based on the Particle Filter Method Using a Pan-Tilt-Zoom Camera

Hybrid Visual Servoing for Rivet-in-hole Insertion Based on Super-twisting Sliding Mode Control

Robot Base Frame Calibration with a 2D Vision System for Mobile Robotic Drilling

Image-based visual servoing using a set for multiple pin-in-hole assembly

Visual servo of uncalibrated eye-in-hand system with time-delay compensation

Fully Uncalibrated Image-Based Visual Servoing of 2DOFs Planar Manipulators With a Fixed Camera

Non-vector Space Visual Servoing for Multiple Pin-in-hole Assembly by Robot

Fast robust peg-in-hole insertion with continuous visual servoing

Analysis on an uncalibrated image-based visual servoing for 6 DOF industrial welding robots

Adaptive Event-Triggered Control For Uncalibrated Visual Servoing of Robot Manipulators

A Switching Control Approach Based on Hybrid Visual Servoing

Multiple Peg-in-Hole Assembly of Tightly Coupled Multi-manipulator Using Learning-based Visual Servo

Uncalibrated Eye-in-hand Visual Servoing Using Recursive Least Squares

Uncalibrated Visual Servoing Design for Competitive Networked Robots

Applications of Uncalibrated Image Based Visual Servoing in Micro- and Macroscale Robotics