Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

Hybrid Visual Servoing for Rivet-in-hole Insertion Based on Super-twisting Sliding Mode Control

Sensor-Based Control Using an Image Point and Distance Features for Rivet-in-Hole Insertion.

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Coordination error control for accurate positioning in movable robotic drilling

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

An adaptive ball-head positioning visual servoing method for aircraft digital assembly

Non-cylinder Holes Precision Machining by Giant Magnetostrictive Components with Sliding Mode Control

Learning-based Optimization Algorithms Combining Force Control Strategies for Peg-in-Hole Assembly.

A Hybrid Visual Servo Control Method for Simultaneously Controlling a Nonholonomic Mobile and a Manipulator.

Research on Visual Servo for Stator Laminations Sorting

Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process

A Noncontact Control Strategy for Circular Peg-in-Hole Assembly Guided by the 6-DOF Robot Based on Hybrid Vision

Position-Based Visual Servoing Control for Multi-Joint Hydraulic Manipulator

Flexible servo riveting system control strategy based on the RBF network and self-pierce riveting process

Non-vector Space Visual Servoing for Multiple Pin-in-hole Assembly by Robot

A Motion Planning Method for Visual Servoing Using Deep Reinforcement Learning in Autonomous Robotic Assembly

A Switching Control Approach Based on Hybrid Visual Servoing

Image-based visual servoing using a set for multiple pin-in-hole assembly

Laser tracker-based control for peg-in-hole assembly robot

Multiple Peg-in-Hole Assembly of Tightly Coupled Multi-manipulator Using Learning-based Visual Servo

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly