Abstract:The utilization of floating docks has an inherently higher risk than their ground counterpart and can result in severe accidents due to the possibility of stability loss and structure failure. To minimize the occurrence of accidents, it is essential to conduct comprehensive testing on the dock's behaviours and identify potential points of failure that could lead to severe accidents using an efficient numerical method for assessing the dynamic response of a floating dock under accidental conditions. The numerical method incorporates a a six-degree-of-freedom (6-DOF) model, a hydrostatic force model, a hydrodynamic force model, a hydraulic model, and a modified P-controller. The model's sensitivity of section number, point number on a section, and time step is assessed through a sensitivity study. A dynamic analysis of the investigated floating dock during the ballasting and de-ballasting operations with valve and pump failures is conducted. The present numerical results show that the modified P-controller can handle all one-valve failures, most of two-valve failures and half of the pump failures during the de-ballasting operations, as well as a few cases of valve failures during the ballasting operations. A practical remedial measure of disabling a symmetrical pump is proposed to prevent the dock-vessel system from entering hazardous conditions. The measure proves effective for all severe two-valve failure and the one-pump failure scenarios during the de-ballasting operations. Overall, the present model can improve the safety and stability of the floating dock system by considering potential failure scenarios and proposing appropriate remedial measures.

A fully coupled time domain model capturing nonlinear dynamics of float-over deck installation

Features of Dynamism Wharf-Cable-Dynamic-Positioning Vessel Rigid-Flexible Coupling Multi-Body System Analysis

Oscillatory Responses of a Spatially Random Seabed in the Vicinity of Structures: Validation and Application of the Integrated CFD-SFEM

CFD simulation of floating body motion with mooring dynamics: Coupling MoorDyn with OpenFOAM

Continuous multi-body dynamic analysis of float-over deck installation with rapid load transfer technique in open waters

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Dynamic analysis of a floating dock under accidental conditions

Enhanced Multi-Springs Model for Estimating Suction Caisson Responses under Cyclic Lateral Loading

Dynamic response analysis of a fully coupled aerodynamic-hydrodynamic-mooring-anchor floating offshore wind turbine

Integrated Numerical Investigation of a 15 MW Semi-Submersible Wind Turbine at Moderate Water Depth

Rigid-flexible coupling multi-body dynamics modeling of a semi-submersible floating offshore wind turbine

Dynamic Characteristics Analysis of the Rigid Flexible Coupling Multi-body System of Wharf-cable-dynamic Positioning Vessel

A Numerical Model for Stability and Dynamic Analyses of a Floating Dock During Operations

Dynamic Characteristic Analysis of Underwater Suspended Docking Station for Resident UUVs

Coupled dynamic analysis on floating wind farms with shared mooring under complex conditions

Data-driven modelling of wave–structure interaction for a moored floating structure

Decoupling Modeling and Stability Optimization of Multiple Degrees of Freedom Motion Equation of Moored Floating Body

Coupled analysis between catenary mooring and VLFS with structural hydroelasticity in waves

Modeling and validation of a tuned liquid multi-column damper stabilized floating offshore wind turbine coupled system

A fully coupled dynamic water-mooring line system: Numerical implementation and applications

Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line