Abstract:Cobalt-based nanomaterials have been widely studied as catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) due to their remarkable bifunctional catalytic activity, low cost, and easy availability. However, controversial results concerning OER/ORR performance exist between different types of cobalt-based catalysts, especially for Co(OH)2 and Co3O4. To address this issue, we develop a facile electrochemical deposition method to grow Co(OH)2 directly on the skeleton of carbon cloth, and further Co3O4 was obtained by post thermal treatment. The entire synthesis strategy removes the use of any binders and also avoids the additional preparation process (e.g., transfer and slurry coating) of final electrodes. This leads to a true comparison of the ORR/OER catalytic performance between Co(OH)2 and Co3O4, eliminating uncertainties arising from the electrode preparation procedures. The surface morphologies, microstructures, and electrochemical behaviors of prepared Co(OH)2 and Co3O4 catalysts were systemically investigated by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and electrochemical characterization methods. The results revealed that the electrochemically deposited Co(OH)2 was in the form of vertically aligned nanosheets with average thickness of about 4.5 nm. After the thermal treatment in an air atmosphere, Co(OH)2 nanosheets were converted into mesoporous Co3O4 nanosheets with remarkably increased electrochemical active surface area (ECSA). Although the ORR/OER activity normalized by the geometric surface area of mesoporous Co3O4 nanosheets is higher than that of Co(OH)2 nanosheets, the performance normalized by the ECSA of the former is lower than that of the latter. Considering the superior apparent overall activity and durability, the Co3O4 catalyst has been further evaluated by integrating it into a Zn-air battery prototype. The Co3O4 nanosheets in situ supported on carbon cloth cathode enable the assembled Zn-air cells with large peak power density of 106.6 mW cm-2, low charge and discharge overpotentials (0.67 V), high discharge rate capability (1.18 V at 20 mA cm-2), and long cycling stability (400 cycles), which are comparable or even superior to the mixture of state-of-the-art Pt/C and RuO2 cathode.

Nanoparticles of NiO and CoO simultaneously dispersed on a mesoporous carbonaceous support as bifunctional electrocatalysts for ORR and OER reactions and Zn-air battery performance.

Synergistic Interactions Between Co Nanoparticles and Unsaturated Co-N2 Sites for Efficient Electrocatalysis

Clarifying the Controversial Catalytic Performance of Co(OH)2 and Co3O4 for Oxygen Reduction/Evolution Reactions toward Efficient Zn-Air Batteries

Incorporation of Cu/Ni in Ordered Mesoporous Co-Based Spinels to Facilitate Oxygen Evolution and Reduction Reactions in Alkaline Media and Aprotic Li-O2 Batteries

Encapsulation of FeCo–Co Nanoparticles in N-Doped Carbon Nanotubes as Bifunctional Catalysts for Zn-Air Battery

Microenvironment Tailoring of NiCo Alloys Coupled with FePc as Efficient Bifunctional Catalysts for High-Rate Zn-Air Batteries

Interfacing spinel NiCo2O4 and NiCo alloy derived N-doped carbon nanotubes for enhanced oxygen electrocatalysis

Interfacial Electron Distribution of Co Nanoparticles Supported on N‐Doped Mesoporous Hollow Carbon Spheres Endows Highly Efficient ORR, OER, and HER

A Superior Bifunctional Electrocatalyst in Which Directional Electron Transfer Occurs Between a Co/Ni Alloy and Fe─N─C Support

Co3Fe7/CoCx nanoparticles encapsulated in nitrogen-doped carbon nanotubes synergistically promote the oxygen reduction reaction in Zn-air batteries

Bifunctional Catalysts of CoNi Nanoparticle-Embedded Nitrogen-Doped Carbon Nanotubes for Rechargeable Zn-air Batteries

Trimetallic Zeolitic imidazolite framework-derived Co nanoparticles@CoFe-nitrogen-doped porous carbon as bifunctional electrocatalysts for Zn-air battery

Bimetal nanoparticles hybridized with carbon nanotube boosting bifunctional oxygen electrocatalytic performance

In Situ, Fast Constructing Interface/doping-Engineered NiCo Bimetal-Based Composites Boosting Electrocatalytic Oxygen Reduction for Zinc-Air Battery

Co Nanoislands Rooted on Co-N-C Nanosheets As Efficient Oxygen Electrocatalyst for Zn-Air Batteries.

NiCo2O4‐Based Nanosheets with Uniform 4 Nm Mesopores for Excellent Zn–Air Battery Performance

In-situ growth of CoNi bimetal anchored on carbon nanoparticle/nanotube hybrid for boosting rechargeable Zn-air battery

Co5.47N Loaded N-doped Carbon As an Efficient Bifunctional Oxygen Electrocatalyst for a Zn-air Battery.

Synthesis of Ultrasmall NiCo 2 O 4 Nanoparticle-Decorated N-Doped Graphene Nanosheets as an Effective Catalyst for Zn–Air Batteries

Synthesis of Ultrasmall NiCo2O4 Nanoparticle-Decorated N-Doped Graphene Nanosheets As an Effective Catalyst for Zn–Air Batteries

Metal–Organic-Framework-Derived Nitrogen-Doped Carbon-Matrix-Encapsulating Co0.5Ni0.5 Alloy as a Bifunctional Oxygen Electrocatalyst for Zinc–Air Batteries