[Ambulatory blood pressure measurement. Importance for managing antihypertensive treatment].

J. Mallion,R. de Gaudemaris,J. Siché

1992-02-08

Presse Medicale

Abstract:

What problem does this paper attempt to address?

Heteroatom-doped Carbon Attached to Ultra-fine Fe-NiCoP as High-Performance Oxygen Electrocatalyst for Zn-air Batteries

Shucheng Ren,Li Liu,Fandi Meng,Yongli Liu,Yushi Xie,Hong-bin Sun,Yang Yang,Haile Yan,Fuhui Wang

DOI: https://doi.org/10.1016/j.ensm.2023.103086

IF: 20.4

2023-11-28

Energy Storage Materials

Abstract:The construction of efficient and durable electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) remains a challenge for rechargeable Zn-air batteries (ZABs). Bimetallic phosphide (NiCoP) holds considerable promise as a bifunctional catalyst. Here, an efficient NiCoP-based bifunctional electrocatalyst was fabricated using PCN-222-assembled organophosphorus complexes, specifically 1,1-bis(diphenylphosphine)ferrocene (DPPF). These DPPF complexes serve as sources of phosphorus and metals, undergoing in-situ conversion into Fe-doped NiCoP nanoparticles (Fe-NiCoP) while simultaneously constructing a heteroatom-doped carbon matrix (NPC). The final catalytic structure, composed of ultra-fine Fe-NiCoP nanoparticles confined within the NPC, exhibits superior bifunctional electrocatalytic activity (with a ΔE gap of 0.69 V between OER and ORR) and exceptional stability. In-situ Raman spectroscopy and DFT calculations reveal that the high performance arises from the synergistic effect of Fe-NiCoP and NPC, where Fe-NiCoP triggers the catalytic activity of the attached NPC. The calculated active site is identified as the C atom near the N atom on the NPC, lowering the potential barrier for O-containing intermediate compounds and enhancing the catalytic performance. In addition, NPC protects the Fe-NiCoP core from oxidation during battery cycles, allowing ZABs equipped with this catalyst to achieve high power density and long-term cycling performance.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
CoFeNi/N-codoped carbon nanotubes with small diameters derived from spherical Prussian blue analog as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries

Di Chen,Guofu Li,Xing Chen,Chengjie Li,Yingchao Zhang,Jing Hu,Jianhua Yu,Liyan Yu,Lifeng Dong,Di Chen,Guofu Li,Xing Chen,Chengjie Li,Yingchao Zhang,Jing Hu,Jianhua Yu,Liyan Yu,Lifeng Dong

DOI: https://doi.org/10.1016/j.jallcom.2022.164964

IF: 6.2

2022-07-01

Journal of Alloys and Compounds

Abstract:Owing to sluggish kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), it is still challenging to rationally design and construct bifunctional electrocatalysts with high performance, low-cost and good stability to substitute precious-metal catalysts. Herein, we introduce Ni ions to obtain spherical Prussian blue analog (PBA) doped with Co/Fe/Ni and further to synthesize nitrogen and Co/Fe/Ni co-doped carbon nanotubes (denoted as CoFeNi-CNTs) with small diameters (20–30 nm) by pyrolyzing the mixture of melamine and PBA. The optimized CoFeNi-CNTs have abundant metal-nitrogen-carbon (M-N-C) structures and CoFeNi nanoparticles respectively as effective ORR and OER active sites, which lead to outstanding electrocatalytic activities and durability with a half-wave potential of 0.85 V for ORR and an overpotential of 440 mV for OER. Especially, the rechargeable Zn-air battery based on CoFeNi-CNTs catalyst delivers a high peak power density of 138.7 mW cm-2, specific capacity of 793 mAh gZn-1 and stable charge-discharge cycling over 500 h, outperforming the Pt/C-RuO2 based devices. And all-solid-state Zn-air battery also displays excellent discharge-charge performance and stability. This work explores the optimization of oxygen catalytic activity for carbon nanotubes by reducing diameters and constructing dual-active-sites strategy.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
FePc Coupled with FeNi/WxC Embeded in Leaf like Multistage Pore Carbon as Highly Efficient Bifunctional Electrocatalyst for Long Life Zinc-air Battery

Shijian Huang,Ting Chen,Xinyuan Pei,Panpan Sun,Xiaowei Lv,Xiaohua Sun,Jinlong Liu,T Leo Liu

DOI: https://doi.org/10.1016/j.jcis.2024.11.100

2024-11-24

Abstract:The development of oxygen reduction/evolution reaction (ORR/OER) bifunctional electrocatalysts with excellent electrocatalytic activity and stability is critical for Zinc-air batteries (ZABs), but remains challenging. Herein, NiFe-WNC with abundant multistage pore structure was prepared by chemical bath deposition and pyrolysis. FePc@NiFe-WNC bifunctional electrocatalyst was obtained by coupling dispersed FePc on it at room temperature. Experimental and theoretical calculations indicate that the electron injection from pyridine nitrogen of NiFe-WNC into FePc regulates the electronic structure of FeNx active site and then enhances the ORR catalytic activity. On the other hand, the electronic structure modulation of NiFe alloy by tungsten carbide in NiFe-WNC improves its OER electrocatalytic performance. All these contribute to the excellent ORR/OER electrocatalytic performance of FePc@NiFe-WNC with half-wave potential of 0.911 V, small potential gap (ΔE = 0.67 V), and good durability. The corresponding liquid ZABs delivers a specific capacity of 818 mAh/gZn and a long cycle life of up to 5000 h. Its quasi-solid-state battery shows a peak power density of up to 441 mW/cm2, which can drive some electrical appliances, highlighting its extensive and safe application potential. This work offers a simple and feasible strategy to construct highly active and stable ORR/OER bifunctional electrocatalysts for developing high-performance ZABs.
N, S Co-Doped Carbon with Embedment of FeNi Alloy As Bifunctional Oxygen Electrocatalysts for Rechargeable Zinc-air Batteries

Run Wu,Xixi Wang,Lei Ge,Zehao Zheng,Yijun Zhu,Chuan Zhou,Jinglin Yuan,Shiliang Zhu,Yuxing Gu,Wei Zhou,Zongping Shao

DOI: https://doi.org/10.1016/j.carbon.2022.10.047

IF: 10.9

2023-01-01

Carbon

Abstract:Zinc-air batteries (ZABs) have sparked great interest, but their wide-ranging applications are limited by sluggish cathode reactions (ORR and OER). In this work, a multifunctional 3D catalyst (FeNi alloy/porous carbon) was easily fabricated by introducing Fe3+ and Ni2+ to modulate in-situ vapor phase grown carbon nanotubes. The as -prepared catalyst FNSNC73-800 displays abundant mesoporous, massive structural defects, and multiple active sites, which greatly facilitate the transport of oxygen species and charge transfer during the reaction. Due to the excellent ORR and OER performance, FNSNC73-800 shows a narrow voltage gap (Delta E) of 0.76 V, which is su-perior to recent reports. Notably, the secondary zinc-air battery with this catalyst displays a high-peak power density (210 mW cm-2), while maintaining an ultra-low potential gap (0.74 V) after a long-term charge -discharge cycle of 200 h. This effort presents a facile strategy for designing economical and efficient 3D catalysts for zinc-air batteries and more energy devices.
Efficient Bifunctional Oxygen Electrocatalysts for Rechargeable Zn‐air Batteries Derived from Ni‐modified Prussian Blue

Haihua Wu,Juanjuan Zhai,Feng Wu,Jiahao Wu,Yudan Li,Xin Xu,Yunfang Gao

DOI: https://doi.org/10.1002/cctc.202301195

IF: 4.5

2023-11-21

ChemCatChem

Abstract:The rational design and exploration of efficient, low‐cost and durable bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key to the development of rechargeable metal‐air batteries. Here, we report a novel approach to in‐situ synthesize Fe0.64Ni0.36 nanoalloy encapsulated in nitrogen‐doped porous carbon nanotubes (FeNi@N‐CNTs) as bifunctional electrocatalyst derived from Ni‐modified Prussian blue, on which the ORR/OER can be promoted by the N‐CNTs surface due to the electron modulation caused by electron transfer from the inner FeNi nanoalloy to the N‐CNTs surface. The abundant wide‐size range of mesopores in N‐CNTs can offer rapid mass transport channels to facilitate the catalytic reactions. What's more, the encapsulation structure endows the outer N‐CNTs acting as a "shield" to prevent the inner FeNi nanoalloy from corrosion in strong basic medium. Thanks to the synergistic effect between the N‐CNTs and FeNi nanoalloy, the obtained FeNi@N‐CNTs exhibits excellent bifunctional oxygen catalytic activity together with outstanding performance and cycling durability in rechargeable Zn‐air battery. This work will open new avenues for the development of advanced bifunctional electrocatalysts for other metal‐air batteries.

chemistry, physical
In Situ, Fast Constructing Interface/doping-Engineered NiCo Bimetal-Based Composites Boosting Electrocatalytic Oxygen Reduction for Zinc-Air Battery

Yanan Wang,Jianhua Qian,Jian Zheng,Junhua Li,Anbang Sun,Jinjuan Xing,Lin Liu,Yong Zheng

DOI: https://doi.org/10.1016/j.jallcom.2024.175821

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:Investigating cost-effective, high-performance, stable and durable oxygen reduction reaction (ORR) catalysts is imperative, yet it's still a formidable obstacle in the advancement of metal-air batteries. In this research, NiCobimetallic oxides in situ combined with NiCo-bimetal alloy upon the surface of carbon-based matrix (reduced graphene oxide) (NiCo/Co-NiO/rGO) were synthesized by microwave hydrothermal treatment coupled with an ultrafast Joule heating shock process. The interfacial charge transfer between the bimetal alloy and metal oxide in NiCo/Co-NiO/rGO resulted in electron redistribution at the heterointerface, where *O species migrated to the NiCo alloy surface through Mn+-O-M-0 (M=Ni, =Ni, Co and n=2, =2, 3) bonds, facilitating continuous electron transport between the two phases and unveiling added active sites. Introducing abundant oxygen vacancies by Ni3+ and Co3+ facilitated charge transfer between different valence states and led to forming more active sites, thus significantly enhancing ORR performance. More importantly, solid solution strengthening within the NiCobimetallic alloy mitigated the oxidation and corrosion of the catalyst. Therefore, the as-synthesized NiCo/Co-NiO/rGO(5% Co) exhibited excellent ORR performance under an alkaline medium. It achieved a half-wave potential (E-1/2) of 0.85 V(vs. vs . RHE) and maintained 89.10 % of its current density after a 12-h long-term reaction. The assembled zinc-air battery (ZAB) employing this catalyst proved remarkable specific capacity (807.04 mAh.g(Zn)(-1)), power density (95.54 mW cm(-2)) and cycling stability (over 240 h), outperforming that of commercial Pt/C+RuO2-based ZAB device. This study presents a viable approach for fabricating low-cost dual transition metal-based catalysts, thereby boosting their electrocatalytic performance and enhancing the efficiency and longevity of metal-air batteries.
Encapsulating CoNi nanoparticles into nitrogen-doped carbon nanotube arrays as bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries

Yu Shen,Feng Yan,Huan Yang,Jia Xu,Bo Geng,Lina Liu,Chunling Zhu,Xitian Zhang,Yujin Chen

DOI: https://doi.org/10.1016/j.jcis.2024.07.227

Abstract:The high theoretical specific energy and environmental friendliness of zinc-air batteries (ZABs) have garnered significant attention. However, the practical application of ZABs requires overcoming the sluggish kinetics associated with oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, 3D self-supported nitrogen-doped carbon nanotubes (N-CNTs) arrays encapsulated by CoNi nanoparticles on carbon fiber cloth (CoNi@N-CNTs/CFC) are synthesized as bifunctional catalysts for OER and ORR. The 3D interconnected N-CNTs arrays not only improve the electrical conductivity, the permeation and gas escape capabilities of the electrode, but also enhance the corrosion resistance of CoNi metals. DFT calculations reveal that the co-existence of Co and Ni synergistically reduces the energy barrier for OOH conversion to OH, thereby optimizing the Gibbs free energy of the catalysts. Additionally, analysis of the change in energy barrier during the rate-determining step suggests that the primary catalytic active center is Ni site for OER. As a result, CoNi@N-CNTs/CFC exhibits superior catalytic activity with an overpotential of 240 mV at 10 mA cm-2 toward OER, and the onset potential of 0.92 V for ORR. Moreover, utilization of CoNi@N-CNTs/CFC in liquid and solid-state ZABs exhibited exceptional stability, manifesting a consistent cycling operation lasting for 100 and 15 h, respectively.
Bimetal nanoparticles hybridized with carbon nanotube boosting bifunctional oxygen electrocatalytic performance

Chen Sun,Yong-Jie Zhao,Xuan-Yi Yuan,Jing-Bo Li,Hai-Bo Jin

DOI: https://doi.org/10.1007/s12598-022-02021-1

IF: 6.318

2022-07-15

Rare Metals

Abstract:Developing bifunctional oxygen catalysts with high efficiency and low cost to replace platinum-group metal catalysts commonly utilized in metal-air batteries is critically desired. In this article, a convenient method to synthesis NiFe nanoparticles hybridized with N-doped carbon nanotube (NiFe@N-CNTs) is reported. Electrocatalytic performance analysis indicates that Ni x Fe 1− x @N-CNTs offers favorable oxygen reduction reaction (ORR) kinetics (onset potential ( E onset ) is 0.87 V and half-wave potential ( E 1/2 ) is 0.84 V), together with excellent oxygen evolution reaction (OER) performance (an overpotential of 270 mV to drive 10 mA·cm −2 ). Contributed by the synergetic effect between NiFe alloy and N-CNTs, when being utilized as air cathode, rechargeable Zn-air batteries present superior cycling stability for over 150 h. This research provides a universal strategy to synthesize the hybrids of intertwined carbon nanotube matrix loaded with alloy nanoparticles.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Design and synthesis of self-supporting FeCoNi- and N-doped carbon fibers/nanotubes as oxygen bifunctional catalysts for solid-state flexible Zn-air batteries

Xiangyu Meng,Ye Yuan,Jianguang Feng,Chenchen Ma,Yuzhuang Sun,Jing Zhang,Beili Pang,Yingjie Chen,Liyan Yu,Lifeng Dong

DOI: https://doi.org/10.1016/j.cej.2023.147648

IF: 15.1

2023-11-25

Chemical Engineering Journal

Abstract:Developing effective bifunctional electrocatalysts with efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) capabilities is critical to advancing rechargeable zinc-air batteries. This study harnessed the properties of organic salts in polymer solutions via electrospinning to synthesize self-supporting flexible bifunctional electrocatalysts, termed FeCoNi flexible carbon nanofibers (FeCoNi FCNFs). These catalysts benefitted from the secondary growth of FeCoNi- and N-doped carbon nanotubes on fiber surfaces, generating numerous metal-nitrogen-carbon (M−N−C) ORR active sites and FeCoNi alloy-based OER active sites. At 10 mA/cm 2 , FeCoNi FCNFs exhibited a half-wave potential of 0.92 V for ORR and 1.64 V for OER. Density functional theory calculations based on first principles demonstrated that FeCoNi FCNFs possessed superior bifunctional activity. Moreover, rechargeable liquid Zn-air batteries constructed with this catalyst achieved a high peak power density and exceptional cycling stability lasting over 630 h. Additionally, a solid-state wearable battery using this catalyst displayed outstanding cycle stability, continuously cycling for over 27 h. This research offers both insight and a fresh approach for designing efficient, cost-effective bifunctional solid-state or liquid zinc-air batteries.

engineering, chemical, environmental
Dual-active-site hierarchical architecture containing NiFe-LDH and ZIF-derived carbon-based framework composite as efficient bifunctional oxygen electrocatalysts for durable rechargeable Zn-air batteries

Di Chen,Xing Chen,Zhenxing Cui,Guofu Li,Bing Han,Qian Zhang,Jing Sui,Hongzhou Dong,Jianhua Yu,Liyan Yu,Lifeng Dong

DOI: https://doi.org/10.1016/j.cej.2020.125718

IF: 15.1

2020-11-01

Chemical Engineering Journal

Abstract:The rational design and synthesis of efficient and durable bifunctional electrocatalysts for oxygen reduction reactions (ORRs) and oxygen evolution reactions (OERs) is significant yet challenging for rechargeable Zn-air batteries. Up to now, most attention has been focused on the ORR performance, but the disproportion of OER proficiencies results in poor cycling capabilities and energy waste during charging process. Herein, a dual-active-site hierarchical composite () is constructed by anchoring high OER-active NiFe layered double hydroxide (NiFe-LDH) nanosheets on the surface of ORR-active ZIF-derived carbon-based framework. This design fully utilizes their advantages and synergistic effects, such as good conductivity, hierarchical structure, ORR-active sites of Co, N-codoped carbon (Co-NC) substrate and OER-active sites of NiFe-LDH, to optimize bifunctional catalytic performance and durability in Zn-air batteries. The demonstrates a lower overpotential of 819 mV than single component Co-NC (893 mV), NiFe-LDH (1178 mV) and noble-metal catalysts (957 mV for Pt/C and 1118 mV for RuO2) in alkaline media. Impressively, a high peak power density (107.8 mW cm-2) and excellent durability (over 300 h) are exhibited by Zn-air batteries based on as electrocatalyst. This work provides a facile, low-cost and environmental-friendly strategy to synthesize bifunctional catalysts for efficient and durable zinc-air batteries.

engineering, chemical, environmental
A Superior Bifunctional Electrocatalyst in Which Directional Electron Transfer Occurs Between a Co/Ni Alloy and Fe─N─C Support

Ziyi Xu,Shihao Wang,Wenmao Tu,Ling Shen,Lu Wu,Shilong Xu,Haining Zhang,Hongfei Pan,Xiao-Yu Yang

DOI: https://doi.org/10.1002/smll.202401730

IF: 13.3

2024-07-22

Small

Abstract:Stable, efficient, and economical bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are needed for rechargeable Zn-air batteries. In this study, a directional electron transfer pathway is exploited in a spatial heterojunction of CoyNix@Fe─N─C heterogeneous catalyst for effective bifunctional electrolysis (OER/ORR). Thereinto, the Co/Ni alloy is strongly coupled to the Fe─N─C support through Co/Ni─N bonds. DFT calculations and experimental findings confirm that Co/Ni─N bonds play a bridging role in the directional electron transfer from Co/Ni alloy to the Fe─N─C support, increasing the content of pyridinic nitrogen in the ORR-active support. In addition, the discovered directional electron transfer mechanism enhances both the ORR/OER activity and the durability of the catalyst. The Co0.66Ni0.34@Fe─N─C with the optimal Ni/Co ratio exhibits satisfying bifunctional electrocatalytic performance, requiring an ORR half-wave potential of 0.90 V and an OER overpotential of 317 mV at 10 mA cm-2 in alkaline electrolytes. The assembled rechargeable zinc-air batteries (ZABs) incorporating Co0.66Ni0.34@Fe─N─C cathode exhibits a charge-discharge voltage gap comparable to the Pt/C||IrO2 assembly and high robustness for over 60 h at 20 mA cm-2.
Three-Dimensional Fe,N-Decorated Carbon-Supported NiFeP Nanoparticles As an Efficient Bifunctional Catalyst for Rechargeable Zinc-O2 Batteries.

Shumaila Ibraheem,Siguo Chen,Jia Li,Wei Li,Xiaoyan Gao,Qingmei Wang,Zidong Wei

DOI: https://doi.org/10.1021/acsami.8b16126

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:The electro-catalyzed oxygen reduction and evolution reactions (ORR/OER) are the key elements of many energy conversion systems, such as fuel cells, water electrolyzers, and rechargeable metal-air batteries. Structural design of durable non-noble nanomaterials as bifunctional OER/ORR catalysts is a major drawback to commercial applications. Herein, we exposed a strongly coupled hybrid material comprising of NiFeP-cubes nanoparticles supported on three-dimensional interconnected Fe,N-decorated carbon (3D-FeNC) as a robust bifunctional ORR/OER catalyst. The strongly coupled NiFeP@3D-FeNC catalyst shows better electron and mass transfer capability, exposure of abundant ORR/OER active sites on the surface, and strongly coupled effects. Accordingly, the as-prepared NiFeP@3D-FeNC catalyst exhibits robust ORR activity (half-wave potential of 0.84 V vs reversible hydrogen electrode) and OER performance (over-potential 0.25 V@10 mA cm-2) in alkaline media. Significantly, the oxygen electrode prepared from the NiFeP@3D-FeNC catalyst further demonstrated superior charge/discharge behavior and long-lasting rechargeability than the benchmark Pt/C + IrO2 catalyst in rechargeable zinc-O2 batteries. This approach opens up a new avenue for the synthesis and advanced the hybrid nanomaterials for various applications.
Preparation of Ni3Fe2@NC/CC Integrated Electrode and Its Application in Zinc-Air Battery

Hui Hu,Xiaofei Ling,Chaogui Tan,Jianguo Lin,Xiaopeng Han,Wenbin Hu

DOI: https://doi.org/10.3389/fchem.2020.575288

2020-11-09

Abstract:Reasonable design and development of a low-cost and high-efficiency bifunctional electrocatalyst for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is essential for promoting the development of Zinc-air battery technology. Herein, we obtained an integrated catalytic electrode, NiFe nanoparticles supported on nitrogen-doped carbon (NC) directly grown on the carbon cloth (designated as Ni3Fe2@NC/CC), by pyrolysis of bimetallic NiFe metal-organic framework (MOF) precursor. There is a synergistic effect between nickel and iron component, which enhances the bifunctional catalytic activity. In addition, the underlying carbon cloth is conducive to the efficient electron transfer and also benefits the uniform loading of catalytically active materials. Thus, the integrated electrode shows good OER/ORR dual-functional catalytic performance, and the OER overpotential is much lower than that of the traditional drop-coating electrode and precious metal catalyst (IrO2). Moreover, the Ni3Fe2@NC/CC integrated electrode used in zinc-air batteries shows good flexibility and cycle stability. Our findings provide a new avenue for the development of efficient and stable bifunctional oxygen electrocatalysts.
Pyridinic-N exclusively enriched CNT encapsulated NiFe interfacial alloy nanoparticles on knitted carbon fiber cloth for bifunctional oxygen catalysts and biaxially flexible zinc-air batteries

Milan Babu Poudel,S. Vijayapradeep,Karthikeyan Sekar,Jong Seok Kim,Jin Yoo Dong

DOI: https://doi.org/10.1039/d3ta07609a

IF: 11.9

2024-03-02

Journal of Materials Chemistry A

Abstract:The electrocatalytic oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are the core reactions responsible for reversible zinc-air batteries but are kinetically challenging because of the complex multielectron transfer process. The exploration and rational design of a non-precious bifunctional oxygen electrocatalyst with dense active sites and optimized electronic structures could facilitate favorable 4e- transfer. In this study, we report a highly reversible bifunctional electrocatalyst for flexible Zn air batteries featuring pyridinic-N exclusively enriched carbon-nanotube-encased nickel-iron (NiFe) interfacial alloy nanoparticles derived from an LDH template on knitted carbon fiber cloth. NiFe nanoparticles are catalytically released from the NiFe-MOF to form CNT tentacles when pyrolyzed in an inert atmosphere. XPS and XAS studies revealed the dominating presence of pyridinic-N, which reduces electron localization around NiFe centers and improves the interaction with oxygenated species. As a result, the NiFe-N-CNT-KCC catalysts exhibited a low operating overpotential (η10) of 173 mV for the OER and a half-wave potential (E1/2) of 0.87 V for the ORR, superior to benchmark electrocatalysts. As an air cathode for zinc-air batteries, the NiFe-N-CNT-KCC-based battery showed excellent electrochemical performance, with an open circuit voltage (OCV) of 1.55 V, high power density (153 mW cm-2), excellent specific capacity of 793.2 mA h g-1, and long-term stability. Most impressively, the solid-state flexible zinc-air battery with the NiFe-N-CNT-KCC cathode showed admirable rate performance and exceptional mechanical stability under arbitrary bending and twisting conditions, holding great potential in practical implementation in next-generation high-power and high-energy-density batteries, even with the potential for wearable applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
FeNi coordination polymer based highly efficient and durable bifunction oxygen electrocatalyst for rechargeable zinc-air battery

Mingjian Zhang,XiMin Hu,Yu Xin,Likai Wang,Zhen Zhou,Lu Yang,Jianzhuang Jiang,Daopeng Zhang

DOI: https://doi.org/10.1016/j.seppur.2022.122974

IF: 8.6

2022-12-25

Separation and Purification Technology

Abstract:In the current field of electrochemistry, it is still a great challenge to develop bifunction oxygen electrocatalysts with low cost, high activity and long-lasting durability for rechargeable metal-air batteries. In this research, an excellent electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which was composed of nanostructured FeNi alloy nanoparticles inlaid on N -doped GOs-tangled porous carbon matrix (FeNi/ N -GPCM), was prepared by pyrolyzing the Ni 2+ ion doped bimetallic Fe-Ni coordination polymer (CP) with graphene oxide (GO) as template in the presence of melamine. Owing to the multilayer porous carbon structure and strong synergistic coupling between N -doped carbon species and FeNi alloy, the prepared electrocatalyst exhibited better catalytic performance (half-wave potential of 0.883 V and overpotential of 310 mV) than commercial Pt/C and RuO 2 . In addition, the Zinc-air battery prepared by the as-obtained bifunction-catalyst has a small charge–discharge voltage gap of 0.85 V, a high energy efficiency of 58.45 %, and an excellent cycling performance (400 h) at 10 mA cm −2 under ambient conditions. This work provided a great promising non-noble metal based multifunctional electrocatalyst for the storage and conversion of renewable energy and was very conductive for the design and synthesis of new CP or metal organic framework (MOF)-based electrocatalysts in the future.

engineering, chemical
Construction of atom-scale Co/Fe/Ni M-N-C active sites within nitrogen-doped carbon spheres for high-performance bifunctional oxygen catalysts in rechargeable zinc-air batteries

Di Chen,Jinxiu Yuan,Jie Zhang,Guofu Li,Lei Tian,Ziping Wang,Jing Hu,Yingchao Zhang,Chengjie Li,Jianhua Yu,Lifeng Dong

DOI: https://doi.org/10.1016/j.est.2024.113772

IF: 9.4

2024-09-16

Journal of Energy Storage

Abstract:Developing carbon-based catalysts with metal‐nitrogen‐carbon (M-N-C) active sites as efficient and low-cost bifunctional catalysts to replace precious metal catalysts for rechargeable zinc-air batteries devices has garnered significant attention. Herein, nitrogen-doped submicron carbon-based spherical bifunctional electrocatalysts (CNPD-CoFeNi) with abundant atom-scale Co/Fe/Ni M-N-C active sites and defects were synthesized. The introduction of massive amounts of Zn species increases the spatial distance of Co/Fe/Ni metal sites to prevent aggregation during pyrolysis, and the evaporation of Zn at high temperatures creates defects synergizing with M-N-C. Consequently, CNPD-CoFeNi possesses a stable carbon-based spherical structure, high electrical conductivity, rich nitrogen content, abundant atom-scale Co/Fe/Ni M-N-C active sites, and defects, displaying outstanding durability, oxygen reduction reaction (ORR) activity with a half-wave potential of 0.87 V, and satisfactory OER performance, surpassing or comparable with the state-of-art Pt/C and RuO 2 , respectively. Notably, liquid Zn-air batteries with CNPD-CoFeNi catalyst exhibit an exceptional high peak power density of 146.5 mW cm −2 and stable charge-discharge cycling over 270 h, outperforming Pt/C-RuO 2 based devices. Additionally, the all-solid-state Zn-air battery also displays satisfactory practicability and stability. The synthesis strategy and its remarkable results provide valuable guidance and inspiration for the future advancement of precious metal substitutes in ORR/OER and rechargeable zinc-air batteries.

energy & fuels
Encapsulation of FeCo–Co Nanoparticles in N-Doped Carbon Nanotubes as Bifunctional Catalysts for Zn-Air Battery

Xiaochao Liu,Siyuan Peng,Xiaoxiao Li,Chao Liu,Jinming Zeng,Xiaopeng Qi,Tongxiang Liang

DOI: https://doi.org/10.1149/1945-7111/ac2281

IF: 3.9

2021-09-01

Journal of The Electrochemical Society

Abstract:The development of low-cost, high catalytic activity oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts is the key to promoting the development of zinc-air batteries. In this paper, a simple one-step pyrolysis method was used to successfully synthesize a binary FeCo–Co/NC catalyst with FeCo and Co nanoparticles encapsulated in N-doped carbon nanotubes. This structure exhibits great characteristics: it has a variety of active species (FeCo, Co, NC), and there is close combination between these active species (FeCo, Co, NC). Electrochemical studies have shown that the initial potential of FeCo–Co/NC during ORR process is 0.93 V, the half-wave potential is 0.808 V, and the limiting current density is 4.94 mA cm−2. In the OER process, at an anode current density of 10 mA cm−2, an overpotential of only 353 mV is shown; a lower Tafel slope and good durability are also observed. Moreover, the zinc-air battery in preparation can be cycled for as long as 2000 times. This provides a new method for the preparation of high-efficiency dual-function electrocatalysts for OER and ORR.

electrochemistry,materials science, coatings & films
Spatially Immobilized PtPdFeCoNi as an Excellent Bifunctional Oxygen Electrocatalyst for Zinc–Air Battery

Mingkuan Xie,Yu Lu,Xin Xiao,Duojie Wu,Bing Shao,Hao Nian,Chunsheng Wu,Wenjuan Wang,Jun Gu,Songbai Han,Meng Gu,Qiang Xu

DOI: https://doi.org/10.1002/adfm.202414537

IF: 19

2024-10-22

Advanced Functional Materials

Abstract:The spatial immobilization of PtPdFeCoNi HEA NPs and multimetallic single atoms on 3D hierarchically ordered porous nitrogen‐doped carbon (HOPNC) skeleton, as well as the successful construction of interconnected channels for fast mass transfer, render the as‐prepared PtPdFeCoNi/HOPNC superior bifunctional electrocatalytic performances for both ORR and OER and excellent performance for zinc–air battery. Developing efficient oxygen electrocatalysts with low cost, high catalytic activity, and robust stability remains a formidable challenge for rechargeable zinc–air batteries (ZABs). Herein, highly dispersed ultrasmall PtPdFeCoNi high‐entropy alloy nanoparticles with a size of ≈ 2 nm and randomly distributed multimetallic single atoms spatially immobilized on the 3D hierarchically ordered porous nitrogen‐doped carbon skeleton (denoted as PtPdFeCoNi/HOPNC) are successfully synthesized via ultra‐rapid Joule heating process. The spatial immobilization on 3D HOPNC skeleton is the key to the high dispersion of multi‐active sites of oxygen electrocatalysts, and the formed hierarchical pore structure is conducive to the successful construction of the rapid mass transfer channel. As a result, the as‐prepared PtPdFeCoNi/HOPNC exhibits a positive half‐wave potential of 0.866 V versus RHE for oxygen reduction reaction (ORR), a low overpotential of 310 mV at 10 mA cm−2 for oxygen evolution reaction (OER), and low Tafel slopes for both ORR and OER. Furthermore, ZAB using PtPdFeCoNi/HOPNC as bifunctional oxygen catalysts exhibits excellent rate performances and superior cycling stability, surpassing that of a commercial Pt/C‐RuO2 mixture. The spatial immobilization strategy of HOPNC provides a new idea for the design and synthesis of efficient catalysts for various applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Design of Fe/Ni-doped N/S-rich carbon with advanced bifunctional electrocatalysis for Zn-air battery

Puxin Weng,Yaqing Guo,Kun Wu,Xin Wang,Guo-Quan Huang,Hang Lei,Yifei Yuan,Weigang Lu,Dan Li

DOI: https://doi.org/10.1039/d3ta01348k

IF: 11.9

2023-05-13

Journal of Materials Chemistry A

Abstract:Bifunctional electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have attracted broad attention due to the widespread implementation of rechargeable zinc-air batteries (ZABs). Herein, we fabricate a Fe/Ni-doped N/S-rich carbon material and test it as an efficient electrocatalyst for both ORR and OER processes. Benefiting from the well-dispersed metal sites on the N/S-rich framework, the material exhibits good electrocatalytic performance with a half-wave potential of 0.82 V. When applied as a cathode electrocatalyst in a home-made zinc-air battery, it displays a higher power density (256 mW cm −2 ) and a larger specific capacity (740 mAh g −1 ) in comparison to Pt/C. This study demonstrates the design of an efficient bifunctional electrocatalyst for ORR and OER, which could provide some insights into the development of noble-metal-free bifunctional catalysts for advanced energy conversion.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Transitional metal alloyed nanoparticles entrapped into the highly porous N-doped 3D honeycombed carbon: A high-efficiency bifunctional oxygen electrocatalyst for boosting rechargeable Zn-air batteries

Zhu Han,Shi-Yi Lin,Jiu-Ju Feng,Lu Zhang,Qian-Li Zhang,Ai-Jun Wang

DOI: https://doi.org/10.1016/j.ijhydene.2021.03.086

IF: 7.2

2021-05-01

International Journal of Hydrogen Energy

Abstract:Rational development of low-cost, durable and high-performance bifunctional oxygen catalysts is highly crucial for metal-air batteries. Herein, transition metal alloyed FeCo nanoparticles (NPs) embedded into N-doped honeycombed carbon () was efficiently prepared by a one-step carbonization method in the existence of NH4Cl and citric acid. Benefiting from the honeycomb-like architectures and the synergistic effects of the FeCo alloy with the doped-carbon matrix, the as-synthesized exhibited outstanding oxygen reduction reaction (ORR) with the more positive onset potential (Eonset = 0.98 V vs. RHE) and half-wave potential (E1/2 = 0.85 V vs. RHE), coupled with outstanding oxygen evolution reaction (OER) with the lower overpotential (318 mV) at 10 mA cm−2. Besides, the home-made Zn-air battery has the larger power density of 144 mW cm−2 than Pt/C + RuO2 (80 mW cm−2). This research offers some valuable guidelines for constructing robust oxygen catalysts in clean energy storage and conversion technologies.

energy & fuels,electrochemistry,chemistry, physical

[Ambulatory blood pressure measurement. Importance for managing antihypertensive treatment].

Heteroatom-doped Carbon Attached to Ultra-fine Fe-NiCoP as High-Performance Oxygen Electrocatalyst for Zn-air Batteries

CoFeNi/N-codoped carbon nanotubes with small diameters derived from spherical Prussian blue analog as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries

FePc Coupled with FeNi/WxC Embeded in Leaf like Multistage Pore Carbon as Highly Efficient Bifunctional Electrocatalyst for Long Life Zinc-air Battery

N, S Co-Doped Carbon with Embedment of FeNi Alloy As Bifunctional Oxygen Electrocatalysts for Rechargeable Zinc-air Batteries

Efficient Bifunctional Oxygen Electrocatalysts for Rechargeable Zn‐air Batteries Derived from Ni‐modified Prussian Blue

In Situ, Fast Constructing Interface/doping-Engineered NiCo Bimetal-Based Composites Boosting Electrocatalytic Oxygen Reduction for Zinc-Air Battery

Encapsulating CoNi nanoparticles into nitrogen-doped carbon nanotube arrays as bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries

Bimetal nanoparticles hybridized with carbon nanotube boosting bifunctional oxygen electrocatalytic performance

Design and synthesis of self-supporting FeCoNi- and N-doped carbon fibers/nanotubes as oxygen bifunctional catalysts for solid-state flexible Zn-air batteries

Dual-active-site hierarchical architecture containing NiFe-LDH and ZIF-derived carbon-based framework composite as efficient bifunctional oxygen electrocatalysts for durable rechargeable Zn-air batteries

A Superior Bifunctional Electrocatalyst in Which Directional Electron Transfer Occurs Between a Co/Ni Alloy and Fe─N─C Support

Three-Dimensional Fe,N-Decorated Carbon-Supported NiFeP Nanoparticles As an Efficient Bifunctional Catalyst for Rechargeable Zinc-O2 Batteries.

Preparation of Ni3Fe2@NC/CC Integrated Electrode and Its Application in Zinc-Air Battery

Pyridinic-N exclusively enriched CNT encapsulated NiFe interfacial alloy nanoparticles on knitted carbon fiber cloth for bifunctional oxygen catalysts and biaxially flexible zinc-air batteries

FeNi coordination polymer based highly efficient and durable bifunction oxygen electrocatalyst for rechargeable zinc-air battery

Construction of atom-scale Co/Fe/Ni M-N-C active sites within nitrogen-doped carbon spheres for high-performance bifunctional oxygen catalysts in rechargeable zinc-air batteries

Encapsulation of FeCo–Co Nanoparticles in N-Doped Carbon Nanotubes as Bifunctional Catalysts for Zn-Air Battery

Spatially Immobilized PtPdFeCoNi as an Excellent Bifunctional Oxygen Electrocatalyst for Zinc–Air Battery

Design of Fe/Ni-doped N/S-rich carbon with advanced bifunctional electrocatalysis for Zn-air battery

Transitional metal alloyed nanoparticles entrapped into the highly porous N-doped 3D honeycombed carbon: A high-efficiency bifunctional oxygen electrocatalyst for boosting rechargeable Zn-air batteries