Abstract:This paper aims to improve the swimming efficiency of biomimetic robotic fish by optimising its propulsion curve with three degree of freedom (DOF), in which the key is to minimise the resistance during swing backstroke of the pectoral fin. For this purpose, a reference point on the pectoral fin is first selected, and then an 8-shaped propulsion curve is constructed to coordinate rowing and flapping motions. Meanwhile, a propulsion curve of feathering motion is also given correspondingly. On this basis, the overall curvature and curve offset are proposed as measurement parameters for the deformation of the propulsion curve and the proportion of abdominal/dorsal circles in the propulsion curve, respectively. As the motion law of feathering is given in a sinusoidal pattern, a data set of hydrodynamic parameters is obtained for pectoral fin propulsion under different motion parameter conditions by computational fluid dynamics(CFD) numerical simulation. Once again, a propulsion curve optimisation model is established based on multi-layer perception(MLP), which uses the hydrodynamic parameters data set as input. The results show that the resistance of swing backstroke reached the minimum when overall curvature is π /10 and curve offset is 0.4, which is enhanced by 30.13% and 33.33% at thrust and lift direction compared to the existing design, respectively. Furthermore, the flow field structure and hydrodynamic parameters around the robotic fish are calculated by CFD. The results show that two sets of vortex rings are generated around the fish body during a propulsion cycle. The vortex rings detached towards the lower and upper sides of the fish body such that the lift is minimal, the thrust direction is relatively stable, and the resistance is minimal during the swing backstroke. The experimental results indicate that it can raise propulsion efficiency during the pectoral fin propulsion process, verifying the effectiveness of this method.

Robot Fish with Two-Dof Pectoral Fins and a Wire-Driven Caudal Fin.

Motion Control For A Multi-Joint Robotic Fish With The Pectoral Fins Assistance

Analysis of Heading Stability Due to Interactions Between Pectoral and Caudal Fins in Robotic Boxfish Locomotion

Kinematic Modelling and Hydrodynamic Analysis of Biomimetic Pectoral Fins of Cownose Ray

Design and Implementation of Multi-Level Linkage Mechanism Bionic Pectoral Fin for Manta Ray Robot

A Novel Untethered Robotic Fish with an Actively Deformable Caudal Fin

Design and Experimental Research on a Bionic Robot Fish with Tri-Dimensional Soft Pectoral Fins Inspired by Cownose Ray

A dual caudal-fin miniature robotic fish with an integrated oscillation and jet propulsive mechanism

Hydrodynamics of a robotic fish tail: effects of the caudal peduncle, fin ray motions and the flow speed

Design of Bionic Robot Fish Propelled by Two Joint Caudal Fin

Pectoral Fin Propulsion Performance Analysis of Robotic Fish with Multiple Degrees of Freedom Based on Burst-and-Coast Swimming Behavior Stroke Ratio

Propulsion curve analysis and optimisation of biomimetic pectoral fin with three degree of freedom based on multi-layer perception

A Novel Fish-Inspired Robot with a Double-Cam Mechanism

Fish Can Save Energy Via Proprioceptive Sensing.

Initial Development and Experiments on a Robotic Fish with a Novel Undulating Fin

Hydrodynamic Performance of Soft Robotic Fish Actuated by Ionic Polymer-Metal Composite Pectoral Caudal Fin

Design and Dynamic Analysis of Pectoral-Fin Propelled Mechanism with 2 Degrees of Freedom

Design and Hydrodynamic Experiment Research on Novel Biomimetic Pectoral Fins of a Ray-Inspired Robotic Fish

Experimental research on the propulsion performance of fish-like caudal fins

Paper Design and Multi Parameter Performance Optimization of the Bionic Robotic Fish Driven by Tail Fin

Design of a Double-joint Robotic Fish Using a Composite Linkage