Abstract:Due to its advantages of realizing repeatable experiments, collecting data and isolating key factors, the bio-robotic model is becoming increasingly important in the study of biomechanics. The caudal fin of fish has long been understood to be central to propulsion performance, yet its contribution to manoeuverability, especially for homocercal caudal fin, has not been studied in depth. In the research outlined in this paper, we designed and fabricated a robotic caudal fin to mimic the morphology and the three-dimensional (3D) locomotion of the tail of the Bluegill Sunfish (Lepomis macrochirus). We applied heave and pitch motions to the robot to model the movement of the caudal peduncle of its biological counterpart. Force measurements and 2D and 3D digital particle image velocimetry were then conducted under different movement patterns and flow speeds. From the force data, we found the addition of the 3D caudal fin locomotion significantly enhanced the lift force magnitude. The phase difference between the caudal fin ray and peduncle motion was a key factor in simultaneously controlling the thrust and lift. The increased flow speed had a negative impact on the generation of lift force. From the average 2D velocity field, we observed that the vortex wake directed water both axially and vertically, and formed a jet-like structure with notable wake velocity. The 3D instantaneous velocity field at 0.6 T indicated the 3D motion of the caudal fin may result in asymmetry wake flow patterns relative to the mid-sagittal plane and change the heading direction of the shedding vortexes. Based on these results, we hypothesized that live fish may actively tune the movement between the caudal fin rays and the peduncle to change the wake structure behind the tail and hence obtain different thrust and lift forces, which contributes to its high manoeuvrability.

Experimental research on the propulsion performance of fish-like caudal fins

Investigation of Fish Caudal Fin Locomotion Using A Bio-Inspired Robotic Model

Initial Development and Experiments on a Robotic Fish with a Novel Undulating Fin

Experimental Investigation of Bionic Undulating Fins

Experimental research of fish-imitating propulsion

DESIGN AND IMPLEMENTATION OF A ROBOTIC FISH BASED ON REVOLUTE WINGTIPS

Structural Optimization of the Caudal Fin Configuration of a Micro Robotic Fish

Design and Performance Testing of a Micro Flexible Caudal Fin-Like Propulsor

Bio-inspired flexible robotic caudal fin with three-dimensional locomotion

Simulation Analysis and Experimental Research on the Movements of Biomimetic Fin

Design and Hydrodynamic Experiment Research on Novel Biomimetic Pectoral Fins of a Ray-Inspired Robotic Fish

Hydrodynamic modeling of an undulating fin for robotic fish design

Experimental and numerical study on hydrodynamic performance of a flapping caudal fin

A FLUID-STRUCTURE INTERACTION STUDY ON A PASSIVELY DEFORMED FISH FIN

Hydrodynamics of a robotic fish tail: effects of the caudal peduncle, fin ray motions and the flow speed

Design and Experimental Research on a Bionic Robot Fish with Tri-Dimensional Soft Pectoral Fins Inspired by Cownose Ray

Hydrodynamic Function Of A Robotic Fish Caudal Fin: Effect Of Kinematics And Flow Speed

Experimental Research on Bionic Caudal Fin Actuated by SMA Wires

The Analysis of Biomimetic Caudal Fin Propulsion Mechanism with CFD

Experimental and Numerical Study on Pectoral-Fin Propulsive System

Numerical Simulation on the Propulsion Performance of a Bioinspired Swimmer with Crescent-Shaped Caudal Fin During Accelerating and Cruising Motion