Abstract:Proprioception is the ability to perceive environmental stimulations through internal sensory organs. Enabling proprioception is critical for robots to be aware of the environmental interactions and respond appropriately, particularly for high-payload grippers to ensure safety when handling delicate objects. State-of-the-art robotic grippers with soft actuators are typically equipped with pressure sensors for pneumatic regulation and control, but very few utilized them for proprioceptive purposes. This lack of environmental awareness was largely compensated by their inherent compliance and conformity, but also due to the generally limited force capabilities. Targeting at this gap, this work proposes a novel Proprioceptive Origamic Soft Actuator (POSA) joint, and a corresponding hybrid robotic gripper design with high-payload soft origamic actuators and rigid supporting frames, achieving up to 564.5 N actuator output force or 302.4 N finger gripping force at 150 kPa low pneumatic pressure and 3.2 kg self-weight. Despite the substantially higher force capability over state-of-the-art soft grippers, the proposed hybrid gripper could retain the excellent inherent compliance thanks to the novel soft origamic actuators. Moreover, a novel scheme of multi-actuator proprioception is proposed by only using the embedded pneumatic pressure sensors, to enable the hybrid gripper with environmental awareness, achieving real-time position and force estimations of errors at <; 1% and 5.6%, respectively. The principles, design, prototyping, and experiments of the proposed hybrid high-payload gripper were presented in this letter. Combining soft robotic compliance, high payload, and proprioception, the gripper could both hold a pealed grape and crack a walnut, with position and force signals being measured without requiring dedicated sensors.

Analysis of an underactuated biomimetic octopus hand for grasping space non-cooperative objects

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Design and Analysis of an Underactuated Robotic Hands for Grasping Space Irregular-Shaped Non-Cooperative Objects.

Octopus-Inspired Adaptable Soft Grippers Based on 4D Printing: Numerical Modeling, Inverse Design, and Experimental Validation

Design of Humanoid Robotic Hand Based on Link Underactuation

OS Hand: Octopus-inspired Self-Adaptive Underactuated Hand with Fluid-Driven Tentacles and Force-Changeable Artificial Muscles

Parameters Optimization and Stability Analysis for a Parallel and Self-adaptive Underactuated Hand

A Novel Parallel Pinching and Self-adaptive Grasping Robotic Hand.

Kinematic and Dynamic Analysis of a Novel 5-DOF Multi-fingered Deployable Robotic Gripper

Octopus-Inspired Underwater Soft Robotic Gripper with Crawling and Swimming Capabilities

Design and Analysis of Underactuated Humanoid Robotic Hand Based on Slip Block-Cam Mechanism

Research on Kinematic Modeling of Octopus-Like Arm Manipulator Composed with Mixed Joints

A multi-jointed underactuated robot hand with fluid-driven stretchable tubes

An Actuation Configuration of Inter-Module Coordination and the Evaluation for the Mechanical Implementation to a Prosthetic Hand

Design and Analysis of Underactuated Robotic Gripper with Adaptive Fingers for Objects Grasping Tasks.

Robust Anthropomorphic Robotic Manipulation through Biomimetic Distributed Compliance

Octopus Arm-Inspired Tapered Soft Actuators with Suckers for Improved Grasping

A Three-joint Coupled, Parallel and Self-adaptive Robot Hand

Pasa Hand: A Novel Parallel And Self-Adaptive Underactuated Hand With Gear-Link Mechanisms

Design Principle of a Dual-Actuated Robotic Hand With Anthropomorphic Self-Adaptive Grasping and Dexterous Manipulation Abilities

A High-Payload Proprioceptive Hybrid Robotic Gripper with Soft Origamic Actuators