Abstract:In this article, an integrated model with spatially distributed inertia and general boundary conditions for the axial-torsional dynamics of a drill string is developed and studied. Based on the cutting geometry of the bit-rock interface, a notion called a "complex delay" is introduced. In the proposed complex-delay model, both the state-dependent delay from the torsional vibration and the multiple regenerative effects due to the loss of contact of drill bit are taken into account. Focusing on the system dynamics with the time delay, an efficient algorithm is developed to discretize and calculate the complex time delay by using a recursion method. The drill-string structure is spatially discretized by using the finite-element method. Numerical studies are conducted and several types of self-excited vibrations are illustrated, including stick-slip motions and bit bounce. The consideration of the complex delay in the drilling process suggests that the maximum number of regeneration periods can exceed ten and that multiple regenerative effects dominate the time-delay effects when the drill bit bounces away from the rock surface and experiences loss of contact. Finally, comparisons are made between the results obtained with the traditional state-dependent-delay model and the proposed complex-delay model. The results reveal that the complex-delay model is volume conservative in terms of the total cut material during the drilling process, while the state-dependent-delay model is not volume conservative. With just the state-dependent-delay model, due to the violation of cutting volume conservation, the result is an unrealistic torque on bit and a higher energy consumption of the drill bit, which all lead to an inaccurate picture of the system dynamics. By contrast, with the proposed complex-delay model, one is able to better capture the cutting dynamics and energy consumption of the drill bit. The findings also reveal that the time-delay effects are weakened, when loss of contact is experienced by the system.

A Stick-Slip Vibration Suppression Method for the Drillstring System Based on Neutral Type Model

Mitigation of Stick-Slip Vibrations in Drilling Systems with Tuned Top Boundary Parameters

Drilling Control System Using an Equivalent Input Disturbance-Based Control With a Neutral-Type Axial-Torsional Coupled Dynamics Model

Stick–Slip Vibration Characteristics Study of the Drill String Based on PID Controller

Stick-slip vibration analysis and vibration frequency extraction of coke pushing system

Analysis on the dynamic characteristics of stick-slip vibration in deep well drill string system

Mechanism Analysis on Torsional Stick-slip Vibration of Drillstring in Extended Reach Well and Some Ways to Its Suppression

Observer-Based H∞ Controller Design for High Frequency Stick-Slip Vibrations Mitigation in Drill-String of Rotary Drilling Systems

Nonlinear motions of a flexible rotor with a drill bit: stick-slip and delay effects

Vibration Suppression and Output Constraint of a Variable Length Drilling Riser System

Measurement and simulation of nonlinear drillstring stick–slip and whirling vibrations

Establishment of Drill-String System Dynamic Model with PDM and Influence of PDM Parameters on Stick–Slip Vibration

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

An Optimal Active-disturbance-rejection Controller for the Rotary Speed of An Anchor-hole Drill Based on Brain Storm Optimization Algorithm

Modeling, Stability and Stick-Slip Behaviour Analysis of Coke Pushing System

Stick–Slip Characteristics of Drill Strings and the Related Drilling Parameters Optimization

Spatial-temporal Dynamics of a Drill String with Complex Time-Delay Effects: Bit Bounce and Stick-Slip Oscillations

State-Dependent Delay Influenced Drill String Dynamics And Stability Analysis

Backstepping sliding mode control of stabilized platform for fully rotary steerable drilling system based on nonlinear disturbance observer

State-Dependent Delay Influenced Drill-String Oscillations and Stability Analysis

Investigation and Analysis of Influential Parameters in Bottomhole Stick–Slip Calculation during Vertical Drilling Operations