Abstract:As the essential component of a quantum dot-sensitized solar cell (QDSC), the counter electrode (CE) plays an important role in electron transfer and catalytic reduction acquisition throughout the device. A novel route to design multilayer functionalized Cu2S thin films as CEs with high catalytic activity and enhanced stability, as well as large specific surface area and high conductivity, is presented. Firstly, Mo-based films were prepared by magnetron sputtering on a glass substrate, and then porous CuZnMo conductive films were formed by etching with hydrochloric acid. Secondly, indium tin oxide (ITO) film was sputtered onto the porous structure to act as a protective layer, and a porous ITO/CuZnMo structured film was obtained after optimization. In the third step, multilayer Cu(x)/ITO/CuZnMo structured films were acquired by sputtering Cu films. Finally, multilayer Cu2S(t)/ITO/CuZnMo functionalized film CEs were obtained via in situ sulfidation of sputtered Cu films. The functions of conduction and resistance to electrolyte corrosion were produced and enhanced by annealing an ITO layer at high temperature prior to Cu deposition, while catalytic activity enabled by Cu2S was realized from Cu film sulfidation. The multilayer Cu2S/ITO(500 °C)/CuZnMo functionalized films exhibit high catalytic activity and enhanced stability for resistance to electrolyte corrosion. Taking multilayer Cu2S/ITO(500 °C)/CuZnMo films as CEs, the QDSCs demonstrated good stability of power conversion efficiency (PCE) after 500 h of irradiation, from an initial 4.21% to a final 4.00%. Furthermore, the thickness of Cu2S film modulated by the duration of Cu sputtering was investigated. It was found that the QDSCs using multilayer Cu2S(40 min)/ITO/CuZnMo functionalized film with a Cu2S thickness of 1.2 μm as CE exhibit the best performance, and the R ct value was 0.57 Ω. The best photovoltaic performance with a PCE of 5.21% (V oc = 533.1 mV, J sc = 18.80 mA cm-2, FF = 52.84%) was achieved under AM 1.5 radiation with an incident power of 100 mW cm-2. This design of a multilayer functionalized CE introduces potential alternatives to the common brass-based CE for long-term QDSCs with high performance.

A Ternary-Mixture-Based Counter Electrode for Quantum-Dot-Sensitized Solar Cells

Polyoxometalate-Modified Ternary Copper-Tungsten-Sulfide Nanocrystals as High- Performance Counter Electrode Materials for Quantum Dots-Sensitized Solar Cells

Antimony tin oxide/lead selenide composite as efficient counter electrode material for quantum dot-sensitized solar cells

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Efficient ternary cobalt spinel counter electrodes for quantum-dot sensitized solar cells

MOF-derived CuxS double-faced-decorated carbon nanosheets as high-performance and stable counter electrodes for quantum dots solar cells

Conductive carbon black/CuS composite counter electrode for the enhanced photovoltaic performance of CdS quantum dot sensitized solar cells

A novel strategy to design a multilayer functionalized Cu2S thin film counter electrode with enhanced catalytic activity and stability for quantum dot sensitized solar cells

A Review of Transition Metal Sulfides as Counter Electrodes for Dye-Sensitized and Quantum Dot-Sensitized Solar Cells

Recent Progresses in Quantum‐Dot‐Sensitized Solar Cells: The Role of Counter Electrodes

The low-cost g-C3N4/CuS electrode for QDSCs prepared with low-temperature solid-state method

ATO/CuS composite counter electrodes enhanced the photovoltaic performance of quantum dot sensitized solar cells

Heat-treatment-induced development of the crystalline structure and chemical stoichiometry of a CuxS counter electrode, and the influence on performance of quantum-dot-sensitized solar cells

The Dye-Sensitized Solar Cells Based on the Interconnected Ternary Cobalt Diindium Sulfide Nanosheet Array Counter Electrode

Fabrication and Characterization of a Multi-Walled Carbon Nanotube-Based Counter Electrode for Dye-Sensitized Solar Cells

One-Step Electrochemical Deposition of Hierarchical Cus Nanostructures on Conductive Substrates As Robust, High-Performance Counter Electrodes for Quantum-Dot-Sensitized Solar Cells

Zeolitic-imidazolate frameworks derived Pt-free counter electrodes for high-performance quantum dot-sensitized solar cells

Electron Migration Optimization Through Nanostructural Control of Hierarchical Fe3O4 Based Counter Electrodes for High-Performance Dye-Sensitized Solar Cells

Flexible counter electrodes with a composite carbon/metal nanowire/polymer structure for use in dye-sensitized solar cells

Photoelectric properties of the layered raspberry sandwich amorphous ZnCo2S4@MnCo2S4/CP composite counter electrode in semiconductor-sensitized solar cells

Hierarchical Cu7S4 Nanotubes Assembled by Hexagonal Nanoplates with High Catalytic Performance for Quantum Dot-Sensitized Solar Cells