Abstract:Implementing large capacitors in integrated circuits demands an occupation of a relatively significant large silicon area on-chip, which strictly limits the capability of the physical implementation of low-frequency integrated circuits that mostly require high capacitance values to provide large time-constants. Capacitance multipliers have been proposed to overcome this issue to realize high-value active capacitances in a small chip area. This paper proposes a new current-mode ultra-low power capacitance multiplier based on the floating capacitance Super Flipped Current Follower (SFCF) circuit which employs two AB class cascaded stages. The main novel idea behind the proposed circuit is combining the cross-coupling Quasi-Floating Gate (QFG) with the class-AB techniques and employing the Super Flipped Current Follower (SFCF) circuit, to enhance the adjustment efficiency ratio (M) factor, while also achieving a high scaling factor "K". As a result, the proposed circuit achieves higher K value at the lower power and chip size area costs, while providing better adjustment efficiency ratio (M), which realizes a better "capacitance adjustability-power" trade-off. The proposed circuit provides other advantages such as: wide electronic tunability of scaling factor K, large Parallel Load Resistance (PLR) value, small value of Equivalent Series Resistance (ESR), relatively small chip size area, and a high ratio of adjustment efficiency (M). The total power consumption of the proposed circuit is obtained as 101 nW, using a base capacitance (C b ) of 1 pF, which leads to the realization of a maximum achievable equivalent capacitance (C eq ) of 1604 pF. In addition, the performance of the proposed tunable capacitance multiplier is examined in the realization of a wide-tunable low-pass filter structure. Furthermore, the performance robustness of the proposed circuit is investigated by the Monte-Carlo and PVT analyses in different technology corners, which justify the good performance of the proposed circuit that makes it a proper candidate to be used in ultra-low power biomedical signal processing.

Bidirectional Current-Mode Capacitor Multipliers for On-Chip Compensation

A Capacitively Coupled Digital Isolator Using Multiple-Pulse-coding Architecture with CMTI of 200kv/μs and Static Current of 60Μa.

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

A Low Cross Regulation Single-Inductor Multi-Output DCDC Converter

An enhanced area-efficient on-chip compensation technique for power converters

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

Applying Diode-Capacitor Voltage Multiplier to Coupled-Inductor Boost Converter for Novel DC-DC Converter with High Voltage Gain and Low Voltage Stress

An Inductorless 5-GHz Differential Dual Regulated Cross-Cascode Transimpedance Amplifier using 40 nm CMOS

A new ultra-low power wide tunable capacitance multiplier circuit in subthreshold region for biomedical applications

Embedded Advanced Capacitor Multiplier Compensation for Two-Stage Amplifier with Large Capacitive Loads

A current mode capacitance multiplier employing a single active element based on Arbel-Goldminz cells for low frequency applications

Phase Leading Input Current Compensation for Crm Boost Pfc Converter

A Multiplexing Modulation Strategy Based On Single-Phase Ac/Dc Converter With Optimized E-Capless Function

A Bidirectional Three-Level Converter Control With Shared Control Circuit and Single-Point Sensing for Flying Capacitor Balance

A capacitance reduction modulation approach of hybrid modular multilevel converter with boosted modulation index and circulating current injection

Adaptive Bandwidth Pll With Compact Current Mode Filter

A Fast Transient Current-Mode Buck Converter With Linear Regulation Mode

Dual Ac Boosting Compensation Scheme for Multistage Amplifiers

A Capacitor Current Based Adaptive Hysteresis Controlled Fast Transient Response DC-DC Converter

Design of Lossless Negative Capacitance Multiplier Employing a Single Active Element

A Low-Cost Constant Current Control Method for DCM and CCM in Digitally Controlled Primary-Side Regulation Flyback Converter