Abstract:The thermal conductivity (λ) of soils is an important property in a variety of science and engineering applications. One of the most widely used λ models in soil science was proposed by de Vries (deV‐0). This model is complicated and difficult to use as it is based on several controversial assumptions. The deV‐0 assumes that a soil system is composed of non‐contacting solid particles (rotated uniform ellipsoids) that are dispersed in a continuous homogeneous medium (air or water). Furthermore, deV‐0 assumes that soil solids consist of quartz and consolidated bulk minerals. These assumptions do not reflect the true nature of soils that are composed of several compacted minerals, diverse in shape and notably different in size. A critical analysis of this model concluded that it's most controversial feature was inherited from an electrical conductivity model for a two‐phase dispersion system; specifically, from weighting shape factors of non‐contacting rotated oblate ellipsoids. Furthermore, deV‐0 has not yet been fully examined and verified with respect to a comprehensive and complete soil λ database. Also, there is a lack of comparable models to deV‐0 that would contain a complete set of clearly described and linked expressions. Consequently, two slightly adjusted versions of deV‐0 were developed; namely, deV‐1 with soil bulk mineralogy (quartz plus integrated residual minerals) and deV‐2 with complete soil mineralogy, i.e. including individual contribution from all soil minerals. Both models underwent successful calibration and verification against λ data of 39 Canadian Field Soils and three Standard Sands. Markedly improved estimates (λest) were obtained when, instead of dry air thermal conductivity (λa), an apparent air thermal conductivity (λa‐app = λa + λv) was applied (λv represents thermal effects caused by migration of water vapor and evaporation/condensation processes). For deV‐1, the following reduction of standard deviation (SD) data was obtained: 53.5% for 17 coarse soils, 34% for 22 fine soils, while 44.5% for all 39 soils. Then, the same calibration factors of deV‐1 were applied to deV‐2 model and similar reduction of SD data was obtained (52.7%, 24.1%, and 40.1%, respectively). Generally, for 39 Canadian Field Soils, both models (deV‐1 and deV‐2), with quartz thermal conductivity (λqtz) of 7.6 W·m‐1·K‐1, produced very close λ estimates (SD ≈ 0.099 and 0.094 W·m‐1·K‐1, respectively). Taking into account the simplicity of mineral composition and fewer calibration coefficients, deV‐1 was a preferable choice. For that reason, soil bulk mineralogy appears to be a good equivalent to complete soil mineralogy. Also, for Standard Sands (100% sand: C‐109, C‐190, NS‐04), improved λest were obtained by replacing λa with λa‐app. Finally, the deV‐1 model was successfully applied to 10 Chinese Soils and the following average SD values were obtained: for four coarse soils 0.135 W·m‐1·K‐1 while for six fine soils 0.127 W·m‐1·K‐1.

Variation of thermal properties with water content and density of residual and basaltic sands from Chile

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

Spatial and temporal variability of physical properties of Aquands under different land uses in southern Chile

Thermal Conductivity of Biocemented Graded Sands

A Study on Modeling a Deep Sand Geothermal Field in South China

Experimental Study and Modelling of the Thermal Conductivity of Sandy Soils of Different Porosities and Water Contents

Pore-to-meter Scale Modeling of Heat and Mass Transport Applied to Thermal Energy Storage: How Local Thermal and Velocity Fluctuations Affect Average Thermal Dispersivity

Water and Heat Transport in Hilly Red Soil of Southern China: II. Modeling and Simulation.

Saturation Dependence of Thermal Conductivity of Soils: Classification and Estimations

Geologic and thermal conductivity analysis based on geophysical test and combined modeling

Soil gas CO2 concentration, isotopic ratio and efflux measurements for geothermal exploration at Cumbre Vieja volcano, La Palma, Canary Islands

Numerical Investigation of Water Evaporation from Fontainebleau Sand in an Environmental Chamber

Advances in the modeling of the Iberian thermal lithosphere and perspectives on deep geothermal studies

Numerical study on heat transfer performance of geothermal piles in a Brazilian sandy soil

An Improved Thermal Conductivity Model for Unsaturated Clay

The impact of soil layering and groundwater flow on energy pile thermal performance

Physical analysis and inverse methods applied to archaeological FIRE replications on ATACAMA desert soils, northern Chile

Testing Study on Moisture Content Effect on Thermal Conductivity for Clay and Sand

Introducing a novel method for determining the effective thermal conductivity at moderate and high Péclet numbers

Investigation of the Influence of Soil Moisture on Thermal Response Tests Using Active Distributed Temperature Sensing (A–DTS) Technology

Soil thermal conductivity model by de Vries: Re‐examination and validation analysis