Abstract:Radio frequency identification (RFID) is a technology that incorporates the use of electromagnetic fields to uniquely identify objects. Among different types of RFID tags, passive tags have some salient features such as light weight, low cost, small size, etc. However, the downside of passive RFID systems is very limited reading range due to lacking their own energy sources (passive RFID tags communicate solely by backscattering the reader's power). A novel concept of passive RFID tag-to-tag (T2T) communication has been recently proposed, via which passive tags in proximity (at centimeter level) can directly communicate with each other with the existence of an external energy source. Utilizing this concept, we proposed a Network of Tags (NeTa) that passive tags can connect with each other through multiple hops, using a the novel concept of turbo backscattering operation. This significantly enhances the scalability of such a T2T network. However, to implement the proposed NeTa architecture, one of the main issues is the inter-tag interference, which brings challenge to the routing protocol design. In our previous work [1], we introduced protocol design for both tag-to-reader routing and tag-to-tag routing, considering basic hardware capability of tags, i.e., tags cannot measure the strength of received signals. In this paper, we extend upon the results in [1] and focus on tag-to-tag routing for two distinct types of tags with different hardware capabilities - tags can measure and attenuate the received signal before backscattering. These functions can greatly reduce the inter-tag interference and therefore enhance the network throughput. The protocol design is based on solutions of two mixed integer non-linear programming (MINLP) problems, respectively. The performances of the proposed protocols are analyzed and the impacts of several network factors (e.g., tag density, the transmit power of the reader, etc.) are investigated.

Multi-hop Routing Protocols for RFID Systems with Tag-to-tag Communication

Routing Protocol Design In Tag-To-Tag Networks With Capability-Enhanced Passive Tags

On the Design of Multi-Hop Tag-to-Tag Routing Protocol for Large-Scale Networks of Passive Tags

Design and development of RFID middleware for datastore

Design of a covert RFID tag network for target discovery and target information routing

Efficient Misplaced-Tag Pinpointing in Large RFID Systems.

STEP: A Time-Efficient Tag Searching Protocol in Large RFID Systems

Retwork: Exploring Reader Network with COTS RFID Systems.

A Protocol Stack for Large-Scale RFID Systems: Mitigating Reader and Tag Collisions

Perfect tag identification protocol in RFID networks

Relay MAC: A Collision Free And Power Efficient Reading Protocol For Active RFID Tags.

A Range-Free Localization of Passive Rfid Tags Using Mobile Readers

Complete and Fast Unknown Tag Identification in Large RFID Systems

Non-blocking tag scanning for passive RFID localization.

A Survey and Tutorial of RFID Anti-Collision Protocols

Design and Optimization of a CDMA-Based Multi-Reader Passive UHF RFID System for Dense Scenarios

Exploring Tag Distribution in Multi-Reader RFID Systems

A Low Delay Multiple Reader Passive RFID System Using Orthogonal TH-PPM IR-UWB.

RollCall : the Design for A Low-Cost and Power Efficient Active RFID Asset Tracking System

A Communication Model for Stateless Networked Tags

High-Throughput and High-Efficiency Multiple Access Scheme for IEEE802.15.4 Based RFID Sensing