Abstract:This paper investigates an observer-based deadbeat predictive speed controller (DBPSC) for a prototype surface-mounted permanent magnet synchronous motor (SPMSM) drive system. Unlike the conventional deadbeat controllers which are mainly used for deadbeat current control in the inner loop in a cascaded control structure, the proposed deadbeat controller is designed by incorporating a speed controller with a load torque disturbance observer. Specifically the proposed deadbeat speed control law consists of a deadbeat stabilizing feedback control term and a compensation control term. The stability of the proposed closed-loop system is assured based on the former term by forcing all poles of the dynamic error vector toward the origin within a short transient time, which guarantees a fast transient response of the control system by using the solution of an optimal control problem. The latter term is proposed based on the predicted q-axis current to compensate for the model nonlinearities and parameter uncertainties. Next, the deadbeat load torque observer (DBLTO) is proposed to provide a precisely estimated load torque with a high estimation rate for the predicted q-axis current in the latter term, which helps the proposed scheme in obtaining a small steady-state error (SSE), a low total harmonic distortion (THD), and robustness against the parameter variations. In addition, the proposed scheme possesses a simple structure, so it reduces the computational burden for digital implementation. The Lyapunov theory is utilized in the stability proof process of the proposed observer-based method. Finally, the comparative studies between the proposed DBPSC and a conventional deadbeat speed controller (DBSC) are performed under the sudden changes of speed and load torque through simulations on MATLAB/Simulink and experiments on a prototype SPMSM drive using a TI TMS320F28335 DSP platform.

Robust Digital Deadbeat Control Design Technique for 3 Phase VSI with Disturbance Observer

An Optimized Disturbance Observer Based Digital Deadbeat Control Technique for Three-Phase Voltage Source Inverter.

Stabilization Of Dc-Dc Buck Power Converter Feeding A Mixed Load Using Passivity-Based Control With Nonlinear Disturbance Observer

Design of a Low-Order Harmonic Disturbance Observer with Application to a DC Motor Position Control

Adaptive Robust Control of a Class of Motor Servo System with Dead Zone Based on Neural Network and Extended State Observer.

An Optimized Deadbeat Control Scheme Using Fuzzy Control in Three-Phase Voltage Source PWM Rectifier

Robust Motion Control System Design with Scheduled Disturbance Observer.

Single-Phase Inverter Deadbeat Control with One-Carrier-Period Lag

A Deadbeat Digital Current Controller Based on Parallel Disturbance Rejection Structure for SPMSM

Progressively converging deadbeat control for UPS inverter

Extended state observer based current-constrained controller for a PMSM system in presence of disturbances: Design, analysis and experiments

Predictive Deviation Filter for Deadbeat Control

An Improved Deadbeat Current Predictive Control with Active Disturbance Rejection for PMSM.

A Robust Deadbeat Control Method for UPS Inverters

Observer-based deadbeat predictive speed controller for surface-mounted PM synchronous motor

A Robust Palstance Control Method of a Combine Cylinder

Disturbance-Observer-Based DC-Bus Voltage Control for Ripple Mitigation and Improved Dynamic Response in Two-Stage Single-Phase Inverter System

Deadbeat Predictive Speed Control of PMSM Via Enhanced Low-gain Disturbance Observer Design and Inertia Identification

Dynamic Sensorless Control Approach for Markovian Switching Systems Applied to PWM DC–DC Converters with Time-Delay and Partial Input Saturation

Design and Implementation of a High-Performance PMLSM Control System with Deadbeat Current Control and SMC