Abstract:Deep inspiration breath hold (DIBH) is a common method for managing respiratory motion in lung radiotherapy (RT) and has shown benefit for significant reduction of cardiovascular and pulmonary toxicity. Cone beam CT (CBCT) is used to capture 3D images of the patient in position for daily treatment, and multiple CBCT scans may be needed to fine tune the patient setup. Furthermore, multiple breath holds are often needed for a single CBCT acquisition (typically similar to 1 min). Because of differences in the tumor and healthy tissue positions between consecutive DIBHs, the inconsistent anatomy in the 2D projection images degrades the quality of the reconstructed CBCT. Moreover, multiple breath holds during the initial setup will increase the probability that a patient will become tired and less able to reproduce consistent DIBH during treatment delivery when it matters most. To address this important clinical issue, a proof-of-concept study was designed using a novel deep learning-based method to derive a 3D volumetric image from two perpendicular 2D projection images (kV-MV pair), thereby reducing the number of DIBHs needed for imaging. The proposed method - implemented with a feature matching network - derives feature maps from the 2D projections and re-aligns them to their projection angle in a Cartesian coordinate system. The 2D feature maps are rendered in 3D space via depth learning by the feature matching network. Finally, the 3D volume is derived from the 3D feature map. We conducted a simulation study using 10 patient cases (110 CT images). Each patient had a 4D CT scan that was split into 10 phase bins for motion evaluation and a DIBH CT scan during simulation and later received DIBH lung RT at our institution. Ray tracing through each phase-binned CT was used to simulate a 2D kV projection at gantry angle 0 degrees and a MV projection at gantry angle 90 degrees. Orthogonal 2D projections (200 projections) from 10 phases were used to train the network to be patient specific while the DIBH CT was held out for testing. The mean absolute error ( MAE), peak signal-to-noise ratio (PSNR) and structural similarity index metric (SSIM) achieved by our method are 93.1 HU and 92.5 HU, 21.7 dB and 15.6 dB, and 0.87 and 0.74 within body and tumor ROI, respectively. These results demonstrate the feasibility and efficacy of our proposed method for 3D imaging from two orthogonal kV and MV 2D projections, which provides a potential solution of fast 3D imaging for daily treatment setup of breath-hold lung RT to ensure treatment accuracy and effectiveness.

BEM-based Simulation of Lung Respiratory Deformation for CT-guided Biopsy

SU‐GG‐J‐08: Physics‐Based Respiration‐Simulating Model Incorporating Pressure‐Volume Parameters for Lung: What Can We Learn from the Biomechanical Modeling Community?

A Personalized Image-Guided Intervention System for Peripheral Lung Cancer on Patient-Specific Respiratory Motion Model

Towards Non-Invasive Lung Tumor Tracking Based on Patient Specific Model of Respiratory System

Patient specific respiratory motion model using two static CT images.

A novel approach for estimating lung tumor motion based on dynamic features in 4D-CT

Lung respiration motion modeling: a sparse motion field presentation method using biplane x-ray images

Sensitivity of Tumor Motion Simulation Accuracy to Lung Biomechanical Modeling Approaches and Parameters

Computed tomography-based radial endobronchial ultrasound image simulation of peripheral pulmonary lesions using deep learning

A model that predicts a Real-Time tumour surface using Intra-Treatment skin surface and end-of-Expiration and end-of-Inhalation planning CT images

In Vivo Characterization Of Lung Tissue Properties From 4d Ct Images For Cancer Radiation Therapy

Predictive Modeling Of Lung Motion Over The Entire Respiratory Cycle Using Measured Pressure-Volume Data, 4dct Images, And Finite-Element Analysis

4d Predictive Patient-Specific Anatomical Model Based On 4d Ct Data: A Feasibility Study

Prediction of Lung Motion from Four-Dimensional Computer Tomography (4DCT) Images Using Bayesian Registration and Trajectory Modelling

4D-Ct Motion Estimation Using Deformable Image Registration and 5d Respiratory Motion Modeling

A patient-specific respiratory model of anatomical motion for radiation treatment planning

Diffeomorphic respiratory motion estimation of thoracoabdominal organs for image‐guided interventions

Modeling Lung Deformation: a Combined Deformable Image Registration Method with Spatially Varying Young's Modulus Estimates.

Fast CT-CT Fluoroscopy Registration with Respiratory Motion Compensation for Image-Guided Lung Intervention

Fast 3D Imaging Via Deep Learning for Deep Inspiration Breath-hold Lung Radiotherapy

Deformable 3D/3D CT-to-digital-tomosynthesis image registration in image-guided bronchoscopy interventions