Abstract:The practical use of lithium-sulfur (Li-S) batteries is largely hindered by their poor cycling stability because of the shuttling of soluble lithium polysulfides (LiPSs) in a slow redox reaction. Physical and chemical confinement by carbon or noncarbon hosts has been used to block LiPS shuttling, but this may only be a complete solution to the problem if it combines with LiPS fast conversion into an insoluble sulfide. Here we report a twinborn TiO2-TiN heterostructure that combines the merits of highly adsorptive TiO2 with conducting TiN and achieves smooth trapping-diffusion-conversion of LiPSs across the interface. TiO2 has high adsorption for LiPSs while TiN promotes their conversion into insoluble Li2S. The fast diffusion of LiPSs from TiO2 to TiN helps achieve both high trapping efficiency and fast conversion. By loading such a heterostructure onto graphene, which acts as a physical barrier, a compact and thin coating is fabricated on the separator, and LiPS shuttling is greatly restrained even with a high sulfur loading. A capacity of 927 mA h g(-1) after 300 cycles is obtained under a low current density of 0.3C. Over 2000 cycles, capacity retentions of 73% and 67% at 1C are achieved for sulfur loadings of 3.1 and 4.3 mg cm(-2). Such an interlayer is expected to promote the practical use of Li-S batteries because of the simple processing and the resulting outstanding capacity and cyclic performance. Such a heterostructure suggests a new way to produce multifunctional interlayers that improve the performance of energy storage devices.

Twinborn TiO2–TiN Heterostructures Enabling Smooth Trapping–diffusion–conversion of Polysulfides Towards Ultralong Life Lithium–sulfur Batteries

Twinborn TiO<sub>2</sub>-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries

“One Stone Two Birds” Design for Dual‐Functional TiO2‐TiN Heterostructures Enabled Dendrite‐Free and Kinetics‐Enhanced Lithium–Sulfur Batteries

MXene‐Derived Ti n O 2 n− 1 Quantum Dots Distributed on Porous Carbon Nanosheets for Stable and Long‐Life Li–S Batteries: Enhanced Polysulfide Mediation via Defect Engineering

Ultrathin TiO2 surface layer coated TiN nanoparticles in freestanding film for high sulfur loading Li-S battery

A Dual‐Functional Conductive Framework Embedded with TiN‐VN Heterostructures for Highly Efficient Polysulfide and Lithium Regulation toward Stable Li–S Full Batteries

Construction of Ti4O7/TiN/carbon microdisk sulfur host with strong polar N–Ti–O bond for ultralong life lithium–sulfur battery

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO<sub>2</sub>-MXene Heterostructures for Lithium-Sulfur Batteries

Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries

Capture and Catalytic Conversion of Polysulfides by in Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

Two-dimensional montmorillonite-based heterostructure for high-rate and long-life lithium-sulfur batteries

Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge

Cobalt/MXene‐derived TiO2 heterostructure as a functional separator coating to trap polysulfide and accelerate redox kinetics for reliable lithium‐sulfur battery

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Hollow multishelled structural TiN as multi-functional catalytic host for high-performance lithium-sulfur batteries

Entrapment of polysulfides by a BiFeO3/TiO2 heterogeneous structure on separator for high-performance Li–S batteries

2D Ultrathin Titanium Nitride Nanosheets as Separator Coatings for Li-S Batteries

The role of titanium-deficient anatase TiO2 interlayers in boosting lithium-sulfur battery performance: polysulfide trapping, catalysis and enhanced lithium ion transport.

Li–S Batteries: Ultrathin MXene Nanosheets Decorated with TiO2 Quantum Dots As an Efficient Sulfur Host Toward Fast and Stable Li–S Batteries (small 41/2018)

Synergistic Adsorption-Catalytic Sites TiN/Ta2O5 with Multidimensional Carbon Structure to Enable High-Performance Li-S Batteries

Li‐S Batteries: Ultrathin MnO2/Graphene Oxide/Carbon Nanotube Interlayer As Efficient Polysulfide‐Trapping Shield for High‐Performance Li–S Batteries (adv. Funct. Mater. 18/2017)