Abstract:As one of the most essential components of fuel cells, the commercialized Nafion-based proton exchange membranes(PEMs) suffer from several drawbacks like high cost and methanol permeability. The aim of this work is to fabricate a high performance PEM with combined low cost and methanol permeability together with high proton conductivity. Three-dimensional hierarchical molybdenum disulfide (MoS2) nanoflower is synthesized via a facile one-pot hydrothermal method, and then was embedd into sulfonated poly ether ether ketone (SPEEK) matrix to prepare composite PEM. The three-dimensional hierarchical architectures of MoS2 nanoflower can not only avoid the aggregation of MoS2 nanosheets but also provide abundant surface area and active sites, which are of benefit to fully take advantage of the intrinsic water absorption and methanol diffusion resistance ability of MoS2 nanosheets. The formed hydrogen bond network with water passway contributes to the improvement in proton conduction of composite membrane. As a consequence, composite membrane with 1 wt% MoS2 nanoflower loading content achieves optimized proton conductivity (0.123 S cm−1, 80 °C) and methanol permeability (21.5 × 10–7 cm2 s−1, 70 °C), which is 59.7% higher and 79.1% lower than that of SPEEK control membrane. Owing to increased proton conductivity and decreased methanol permeability, the maximum power density of the SPEEK/MoS2-1 composite membrane is 82.7 mW cm−2 at 70 °C, which is nearly 64.7% higher than that of pure SPEEK membrane (only 50.2 mW cm−2). Furthermore, the durability test confirms that the SPEEK/MoS2 composite membrane still possesses satisfactory stability even after continuous operation at 70 °C for 100 h.

Preparation and Characterization of Quaternized Poly(vinyl Alcohol)/chitosan/mos2 Composite Anion Exchange Membranes with High Selectivity.

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Preparation and Properties of Chitosan/acidified Attapulgite Composite Proton Exchange Membranes for Fuel Cell Applications

Dual reinforced composite membranes from in-situ ionic crosslinked quaternized chitosan filled quaternized polyvinylidene fluoride nanofiber for alkaline direct methanol fuel cell

Layered Double Hydroxide-Coated Silica Nanospheres with 3D Architecture-Modified Composite Anion Exchange Membranes for Fuel Cell Applications

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Enhanced Conductivity of Anion-Exchange Membrane by Incorporation of Quaternized Cellulose Nanocrystal.

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

High durable poly(vinyl alcohol)/Quaterized hydroxyethylcellulose ethoxylate anion exchange membranes for direct methanol alkaline fuel cells

Quaternized poly(styrene ethylene butylene poly styrene)/multiwalled carbon nanotube composites for alkaline fuel cell applications

Synthesis and Properties of a Novel Side-Chain-type Hydroxide Exchange Membrane for Direct Methanol Fuel Cells (Dmfcs)

Modification of sulfonated poly (etherether ketone) composite polymer electrolyte membranes with 2D molybdenum disulfide nanosheet-coated carbon nanotubes for direct methanol fuel cell application

3D nanoflower-like layered double hydroxide modified quaternized chitosan/polyvinyl alcohol composite anion conductive membranes for fuel cells

Composite Proton Exchange Membranes Based on Chitosan and Phosphotungstic Acid Immobilized One-Dimensional Attapulgite for Direct Methanol Fuel Cells

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Quaternized chitosan/polyvinyl alcohol anion exchange membrane enhanced by functionalized attapulgite clay with an ionic "chain-ball" surface structure

Synthesis and Characterization of Anion Exchange Membranes for Alkaline Direct Methanol Fuel Cells

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Cross-linked Hydroxide Conductive Membranes with Side Chains for Direct Methanol Fuel Cell Applications