Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

Enhanced Performance of Solution-Processed Broadband Photodiodes by Epitaxially Blending MAPbBr3 Quantum Dots and Ternary PbSxSe1-x Quantum Dots As the Active Layer.

Hybrid Bulk‐Heterojunction of Colloidal Quantum Dots and Mixed‐Halide Perovskite Nanocrystals for High‐Performance Self‐Powered Broadband Photodetectors

Hybrid Field-Effect Transistors and Photodetectors Based on Organic Semiconductor and CsPbI3 Perovskite Nanorods Bilayer Structure

Solution-processed MAPbI 3 /Cs 2 AgBiBr 6 heterostructure through epitaxial growth for broadband photo-detection

Hetero-integrated MoS 2 /CsPbBr 3 photodetector with enhanced performance via combinational modulation of grain boundary passivation and interfacial carrier separation

Enhanced Visible to Near-Infrared Photodetectors Made from MoS2-based Mixed-Dimensional Structures

Double Active Layers Constructed with Halide Perovskite and Quantum Dots for Broadband Photodetection

High‐Performance MAPbI3/PM6:Y6 Perovskite/Organic Hybrid Photodetectors with a Broadband Response

Solution-processed, flexible and broadband photodetector based on CsPbBr3/PbSe quantum dot heterostructures

High-Performance Broadband Photodetectors Combining Perovskite and Organic Bulk Heterojunction Bifunctional Layers

Solution‐Processed CsPbBr 3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High‐Performance Photodetectors

Perovskite Photodetectors Based on p-i-n Junction With Epitaxial Electron-Blocking Layers

All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

Synergetic Enhancement of CsPbI3 Nanorods-based High-Performance Photodetectors via PbSe Quantum Dot Interface Engineering

High performance hybrid MXene nanosheet/CsPbBr3 quantum dot photodetectors with an excellent stability

Bilayer PbS Quantum Dots for High-Performance Photodetectors.

Enhanced Performance of Perovskite Single-Crystal Photodiodes by Epitaxial Hole Blocking Layer

High-performance and stable hybrid photodetector based on a monolayer molybdenum disulfide (MoS2)/nitrogen doped graphene quantum dots (NH2 GQDs)/all-inorganic (CsPbBr3) perovskite nanocrystals triple junction

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors

High performance UV–vis–NIR photodetectors based on ZnO/organic–inorganic Sn–Pb hybrid perovskite heterojunction

Hybrid Organolead Halide Perovskite Microwire Arrays/single CdSe Nanobelt for a High-Performance Photodetector