Abstract:A series of CeO2 supports with particular morphologies (nanorods, nanocubes, nanooctas, and nanoparticles) were successfully fabricated by controlling the parameters of the hydrothermal method. The obtained nano-CeO2 materials were utilized as the supports of the Ni-based CO2 methanation catalysts prepared by the incipient impregnation method. It was found that the catalyst supported on the CeO2 nanoparticles (5Ni/NPs) exhibited much higher catalytic activity and better stability than those of catalysts with other morphological CeO2 supports. Thus, the catalytic performance of Ni/CeO2 catalysts could be facilely tuned and optimized by precisely designing the morphology of the CeO2 support. The XPS, CO2-TPD, and H2-TPR characterizing techniques showed that Ni-based catalysts supported on nano-CeO2 with varied morphologies displayed different catalytic performances. It was supposed that the typical merits, such as the abundant oxygen vacancy, medium basic sites, moderate metal-support interaction, excellent reduction ability, etc., were considered as the main origins for the enhancement of the low-temperature catalytic activities. Furthermore, the kinetic study revealed that the Ni-based catalysts supported on the nano-CeO2 with varied morphologies performed the different apparent activation energies toward CO2 methanation. The specific reaction intermediates and possible reaction pathways were carefully investigated through the in-situ DRIFTS and online TPSR techniques. Overall, this work would provide new perspectives that the roles of the morphology effect of the support ought to be emphatically considered when designing new catalysts.

Ce enhanced RuNi alloy multi-metal synergic hydrotalcite oxide derived catalyst for high performance CO2 methanation

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Highly active Ni/CeO2/SiO2 catalyst for low-temperature CO2 methanation: Synergistic effect of small Ni particles and optimal amount of CeO2

An Al2O3-supported NiFe bimetallic catalyst derived from hydrotalcite precursors for efficient CO2 methanation

CO<sub>2</sub> Methanation over Rare Earth Doped Ni-Based Mesoporous Ce<sub>0.8</sub>Zr<sub>0.2</sub>O<sub>2</sub> with Enhanced Low-Temperature Activity

CO2 Methanation on the Catalyst of Ni/MCM-41 Promoted with CeO2

Ni-CeO2 Catalyst with High Ni Loading Prepared by Salt-Assisted Solution Combustion for CO2 Methanation

Insight and comprehensive study of Ni-based catalysts supported on various metal oxides for CO2 methanation

Reduced graphene oxide supported Ni-Ce catalysts for CO2 methanation: The support and ceria promotion effects

Enhancement of hollow Ni/CeO2-Co3O4 for CO2 methanation: From CO2 adsorption and activation by synergistic effects

Niobium Modification of CeO2 Tuning Electron Density of Nickel-Ceria Interfacial Sites for Enhanced CO2 Methanation

Effect of Yttrium on Ce/Ni-Metakaolin Catalysts for CO2 Methanation

Self-dispersed bimetallic NiRu nanoparticles on CeO2 for CO2 methanation

CO2 Methanation over the Ni-based Catalysts Supported on Nano-Ceo2 with Varied Morphologies

Metal organic framework derived Ni/CeO2 catalyst with highly dispersed ultra-fine Ni nanoparticles: Impregnation synthesis and the application in CO2 methanation

Ceria engineering in nickel catalysts to improve CH 4 selectivity and yield for CO methanation

CO2 methanation over rare earth doped Ni based mesoporous catalysts with intensified low-temperature activity

Ni-based mesoporous Ce0.8Zr0.2O2 catalyst with enhanced low-temperature performance for CO2 methanation

Screening Transition Metals (mn, Fe, Co, and Cu) Promoted Ni-Based CO2 Methanation Bimetal Catalysts with Advanced Low-Temperature Activities

Highly active Ni/CeO2 catalyst for CO2 methanation: Preparation and characterization

CO2 methanation over Ni nanoparticles inversely loaded with CeO2 and Cr2O3: Catalytic functions of metal oxide/Ni interfaces