Abstract:Earthquake-induced building collapse and progressive collapse due to accidental local failure of vertical components are the two most common failure modes of reinforced concrete (RC) frame structures. Conventional design methods usually focus on the design requirements of a specific hazard but neglect the interactions between different designs. For example, the progressive collapse design of an RC frame often yields increased reinforcement and flexural strength of the beams. As a result, the seismic design principle of "strong-column-weak-beam" may be violated, which may lead to unfavorable failure modes and weaken the seismic performance. To avoid these adverse effects of the progressive collapse design on the seismic resistance of RC frames, a novel structural detailing is proposed in this study. The proposed detailing technique intends to concurrently improve the seismic and progressive collapse performances of an RC frame by changing the layout of the newly added longitudinal reinforcement against progressive collapse without introducing any additional reinforcement. A six-story RC frame is used as the prototype building for this investigation. Both cyclic and progressive collapse tests are conducted to validate the performance of the proposed structural detailing. Based on the experimental results, detailed finite element (FE) models of the RC frame with different reinforcement layouts are established. The seismic and progressive collapse resistances of different models are compared based on the incremental dynamic analysis (IDA) and nonlinear dynamic alternate path (AP) methods, respectively. The results indicate that the proposed structural detailing can effectively resolve the conflict between the seismic and progressive collapse designs.

Research on Inspection, Identification and Reinforcement Design of Building Structure Based on PKPM Software

Study on remote collaborative pseudo-dynamic tests of multi-story frames

The application of PKPM software and design of building structure

PKPM-based Calculations of Masonry Strengthening with Concrete Splity

Seismic reinforcement analysis and measurement research of reinforced concrete frame structure

Research on PKIM Energy Construction Engineering Software System Based on Building BIM Technology

Analysis of performance-based seismic design of frame structures

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

Reinforcement of local structure of complex building

Experimental and numerical investigation on the influence of PC window beam on the seismic performance of PC shear wall structures

Estimation of building damage caused by adjacent deep excavation in clay

Discussion of Application for Software SATWE and TAT Used in Multistory and High-Rise Buildings Structure Analysis

Seismic appraisal and strengthening design of a brick-frame mixed structure

Research on New Method for Safety Testing of Steel Structures—Combining 3D Laser Scanning Technology with FEA

Studies on Seismic Identification and Reinforcement Design of Building Structures

Study on Seismic Performance of Reinforced Concrete Masonry High-Rise Building

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Evaluation of Identification Software Applicability in Concrete Structure

Complexity Reduction for the Architecture Design of Large-Scale Public Buildings Based on Seismic Structure Simulation Technology

Investigation of the Structural Form Optimization Methods of High-Rise Buildings

Research on the Evaluation Method for Key Buildings Based on Seismic Damage Index Modification—Taking the Yangzonghai Area Seismic Fortification Planning of Kunming City as an Example