Abstract:Robots with openness and flexibility have attracted a large number of researchers to conduct in-depth studies in the field of surface machining. However, there is a redundant degree of freedom (DOF) in 6-DOF robot machining: when a ball end milling cutter is used to process curved parts, the tool point needs to strictly follow the planned milling trajectory, but the tool axis vector only needs to be within a certain range. During the machining process, the rotation of the tool around its axis is not constrained. Therefore, it is necessary to optimize the redundant DOF. Aiming at the redundant DOF of the tool axis vector in ball end milling for surface parts, a Redundancy Optimization strategy for Minimum Joint trajectory (ROMJ) is proposed. It takes the shortest trajectory of robot joints as the optimization objective, and the numerical optimization method is adopted to carry out the optimal design of tool axis vector trajectory in the milling process. Before optimization, to decrease the data volume, the number of track points is sampled and adjusted based on curve characterization errors. In the optimization process, considering the obvious difference in the load quality characteristics of the robot joints, a Redundancy Optimization strategy for Minimum Joint trajectory considering the different Load of joints (ROMJ-L) is proposed. The load difference coefficients of each joint are introduced into the optimization objective of the trajectory of robot joints. By using this method, the optimal design of each joint trajectory of the robot is realized. In order to verify the methods proposed in this paper, a comparison experiment is carried out. The results show that under the same tool point trajectory, the proposed methods can significantly reduce the robot joint trajectory, and the joint trajectory is influenced by the load difference of each joint. Finally, an Eflin-10 robot is used to process the butterfly trajectory tool path by the trajectory planned by the ROMJ-L method, and the results show that the method is practical.

The Layout Optimization in Robotic Cells for Grinding Applications

Industrial Robot Layout Based on Operation Sequence Optimisation

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Challenges and key technologies in robotic cell layout design and optimization

Optimization on multi-robot workcell layout in vertical plane

Process optimization of robotic grinding to guarantee material removal accuracy and surface quality simultaneously

A whole-path posture optimization method of robotic grinding based on multi-performance evaluation indices

Design and Modeling of Belt Grinding Tool for Industrial Robot Application

Layout design and optimization of industrial robot automated production line based on genetic algorithm

Optimal Configuration for Mobile Robotic Grinding of Large Complex Components Based on Redundant Parameters

Vibration suppression of an industrial robot with AGV in drilling applications by configuration optimization

The Layout Optimization of the Motor Wheelset's Assembly Workshop

Adaptive Grinding Planning of Robotic Arms With Minimal Cost

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

A Novel Approach to Robotic Grinding Guaranteeing Profile Accuracy Using Rigid-Flexible Coupling Force Control for Free-Formed Surfaces

Posture Optimization in Robotic Flat-End Milling Based on Sequential Quadratic Programming

Robot Workcell Layout Optimization Based on Joint Space Evaluation

Pose Optimization in Robotic Milling Based on Surface Location Error

Dynamic Modeling and Design Parameter Optimization of a 5-DoF Parallel Machining Robot

Method for Optimizing Manipulator’s Geometrical Parameters and Selecting Reducers

Ball-End Cutting Tool Posture Optimization for Robot Surface Milling Considering Different Joint Load