Abstract:High-accuracy, fast-response, and low-overshoot force control are important to guarantee the material removal accuracy and surface quality of robotic compliant grinding. In order to achieve the above target, this study develops an active compliant force-controlled end-effector based on a series elastic actuator for the robotic grinding of curved parts. Firstly, a decoupled robotic grinding system composed of an industrial robot and an end-effector is developed, and a novel force-controlled end-effector is designed by adding an elastic component between the servo motor and the load to improve compliance. Secondly, the influences of the elastic component and grinding tool stiffness on the stability of the force-controlled end-effector system are analyzed by establishing a contact model of the compliant end-effector and the transfer function of the entire force control system. Then, the stiffness of the grinding tool and the elastic component are optimized with full consideration of the system cutoff frequency and the end-effector compliance. To improve the force tracking accuracies of the developed compliant end-effector, a proportional-integral (PI) controller with first-order differential force feedforward control is designed. Finally, grinding experiments are conducted for verification. The effects of spring stiffness and grinding tool stiffness on the force control system are tested, which match well with the theoretical analysis. Grinding results show that the maximum force control error of the compliant force-controlled end-effector is decreased by 70% compared to that of the rigid force-controlled end-effector, and the overshoot of the force control is reduced from 30% to almost 0 under the same response speed. The maximum and average absolute grinding depth errors using the designed end-effector are reduced by 57.2% and 58.6%, respectively, compared with those of the traditional rigid end-effector, and the average surface roughness of the finished part is reduced by 19.2%. Which demonstrates the effectiveness and advantages of the proposed compliant force-controlled end-effector.

A Novel Approach to Robotic Grinding Guaranteeing Profile Accuracy Using Rigid-Flexible Coupling Force Control for Free-Formed Surfaces

Process optimization of robotic grinding to guarantee material removal accuracy and surface quality simultaneously

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Robotic compliant grinding of curved parts based on a designed active force-controlled end-effector with optimized series elastic component

Research on Surface Tracking and Constant Force Control of a Grinding Robot

A Free Form Robotic Grinding System: A Mathematical Model and an Actual System

A compact compliant robot for the grinding of spherical workpieces with high force control accuracy

Collaborative improvement of profile accuracy and aerodynamic performance in robotic grinding of transonic compressor blade leading edge

Piecewise approximation and local differential compensation of contact stress distribution of workpiece surface in robotic belt grinding

Robot Grinding System Trajectory Compensation Based on Co-Kriging Method and Constant-Force Control Based on Adaptive Iterative Algorithm

Intelligent Control for A Robot Belt Grinding System

Research and application on force control of industrial robot polishing concave curved surfaces

A Method for Grinding Removal Control of a Robot Belt Grinding System

Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

A novel feature-guided trajectory generation method based on point cloud for robotic grinding of freeform welds

A Material Removal Model for Robotic Belt Grinding Process

Proxy-Based Sliding Mode Force Control for Compliant Grinding via Diagonal Recurrent Neural Network and Prandtl-Ishlinskii Hysteresis Compensation Model

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces

Hybrid active/passive force control strategy for grinding marks suppression and profile accuracy enhancement in robotic belt grinding of turbine blade