Abstract:Purpose This paper aims to present an adaptive sliding mode control (ASMC) for tunnel boring machine cutterhead telescopic system with uncertainties to achieve a high-precision trajectory in complex strata. This method could be applied to solve the problems caused by linear and nonlinear model uncertainties. Design/methodology/approach First, an integral-type sliding surface is defined to reduce the static tracking error. Second, a projection type adaptation law is designed to approximate the linear and nonlinear redefined parameters of the electrohydraulic system. Third, a nonlinear robust term with a continuous approximation function is presented for handling load force uncertainty and reducing sliding mode chattering. Moreover, Lyapunov theory is applied to guarantee the stability of the closed-loop system. Finally, the effectiveness of the proposed controller is proved by comparative experiments on a scaled test rig. Findings The linear and nonlinear model uncertainties lead to large variations in the dynamics of the mechanism and the tracking error. To achieve precise position tracking, an adaptation law was integrated into the sliding mode control which compensated for model uncertainties. Besides, the inherent sliding mode chattering was reduced by a continuous approximation function, while load force uncertainty was solved by a nonlinear robust feedback. Therefore, a novel ASMC for tunnel boring machine cutterhead telescopic system with uncertainties can improve its tracking precision and reduce the sliding mode chattering. Originality/value To the best of the authors’ knowledge, the ASMC is proposed for the first time to control the tunnel boring machine cutterhead telescopic system with uncertainties. The presented control is effective not only in control accuracy but also in parameter uncertainty.

Nonlinear Adaptive Control Of Epb Shield Tunneling Machine

Intelligent Control for Earth Pressure in Chamber of Earth Pressure Balance Shield Machine Based on Multi-system Coordination

Control model of earth pressure balance for shield tunneling

Earth Pressure Balance Control for EPB Shield

Ground Surface Deformation Control Based on Chamber Pressure Direct Feedback

Fault Diagnosis of Hard Rock Tunnel Boring Machine Cutterhead Driving System Based on Adaptive Observers

Earth Pressure Balance Control Based on Feedforward-Feedback Compound Control

Trajectory Tracking Control in Horizontal Direction of Open-type Hard Rock Tunnel Boring Machine Based on Adaptive Robust Control Strategy

The Shield Tunneling Machine Experiment System for the Earth Pressure Balance Control Mechanism

Indirect Adaptive Robust Trajectory Tracking Control of Hard Rock TBM with Load Variation of Tunneling Face

Adaptive Sliding Mode Control for Tunnel Boring Machine Cutterhead Telescopic System with Uncertainties.

Precision Versus Intelligence: Autonomous Supporting Pressure Balance Control for Slurry Shield Tunnel Boring Machines

Nonlinear Cutterhead Pose Control of Large-Diameter Slurry Shields in Complicated Stratum

Realization of Earth Pressure Balance for Shield Tunnelling Machine

Predictive control of slurry pressure balance in shield tunneling using diagonal recurrent neural network and evolved particle swarm optimization

The Development and Nonlinear Adaptive Robust Control of the Air Chamber Pressure Regulation System of a Slurry Pressure Balance Shield Tunneling Machine

Pose and trajectory control of shield tunneling machine in complicated stratum

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

Earth pressure balance control of shield tunneling machine based on nonlinear least squares support vector machine model predictive control

Modeling and Analysis of Thrust Force for Epb Shield Tunneling Machine

Variable speed pump control system for driving cutter head of test shield tunneling machine