Abstract:Soft robots have unique advantages over traditional rigid robots and have broad application prospects in many fields, such as pipe inspections. Several of the reported pipe-crawling soft robots have long actuation periods and small locomotion speeds. Moreover, they lack active steering property to adapt to complex piping systems, such as T-shaped pipes. To solve the above problems, this paper proposes a novel parallel-pipe-crawling pneumatic soft robot consisting of three extensible pneumatic soft actuators and two flexible feet. The parallel structure and flexible feet allow the robot to reduce the number of steps in a crawling cycle. The extensible actuator allows the robot to change its body shape for active steering property. However, a complete mathematical model for soft robots with parallel structure is hard to establish. In this paper, the phenomenological modeling method is used to realize a mathematical model with high precision, limited calculation, and easy engineering applicability of the pipe-crawling soft robot. Then, the prototype of the robot is fabricated with the optimal structural parameters selected by finite element simulations. The static identification experiment shows that the average errors of the extended length and output force are 0.51 mm and 0.28 N, respectively. The crawling experiments in various scenarios show that the horizontal crawling speed is higher than 15 mm/s, the maximum load is 2.456 kg, and the minimum turning radius is 38.2 mm. The robot shows great potential for inspecting in complex pipes with high crawling efficiency, excellent flexibility, and strong adaptability by switching its crawling gaits.

Mechanical Property of a Articulated In-Pipe Locomotion Robot

Property Analysis and Structure Optimization of Robotic Arm Based on SolidWorks and ANSYS

Modeling and simulation of humanoid lower limb based on Pneumatic Artificial Muscle

In-pipe Positioning Micro-Robot Based on Cymbal Actuators and Optical Navigation

Kinematic Properties of Wheeled Mobile Robots in Round Ducts/pipes

Kinematic Analysis of a Wheeled-Leg Small Pipeline Robot Turning in Curved Pipes

Design and analysis of a pipe robot based on metamorphic mechanism

Motion Law and Mechanical Properties of PIGs When Passing through a Pipe Bend

Design and Modeling of a Parallel-Pipe-Crawling Pneumatic Soft Robot

Analysis of the Motion Mechanism of Actively Spirally Driven Pipe Robot

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

Mechanical Structure Design of a Power Self-support In- pipe Robot

Structure Design and Characteristic Analysis of Compound-Driven Unit for Pipeline Robot

Development of a Practical Articulated Wheeled In-pipe Robot for Both 3-4 in Force Main Inspection of Sewer Pipes

Design and analysis of four-legged wall-climbing robot

Structural Design and Kinematics Analysis of Compound-driven Pipeline Robot

Design and motion analysis of a new wheeled rolling robot

Wheel-legged In-pipe Robot with a Bioinspired Hook and Dry Adhesive Attachment Device

Design and motion analysis of multi-motion mode pipeline robot

3D Pipe Forming of a New Bending Machine with a 3PUU–3RPS Hybrid Mechanism

Design and Development of a Deformable In-Pipe Inspection Robot for Various Diameter Pipes