Abstract:We have measured the elastic properties of live cells by Atomic Force Microscope (AFM) using different tip geometries commonly used in AFM studies. Soft 4-sided pyramidal probes (spring constant = 12 and 30 mN/m, radius 20 nm), 3-sided pyramidal probes (spring constant = 100 mN/m, radius 65-75 nm), flat (circular) probes (spring constant = 63 mN/m, radius 290 nm) and spherical probes (spring constant = 43 mN/m, radius 5 μm) have been used. Cells (3T3 fibroblasts) having elastic moduli around 0.5 kPa were investigated. We found that cell measured stiffness shows a systematic dependence on tip geometry: the sharper the tip, the higher the average modulus values. We hypothesize that the blunter the tip, the larger the contact area over which the mechanical response is measured or averaged. If there are small-scale stiffer areas (like actin bundles) they will be easier to pick up by a sharp probe. This effect can be seen in the wider distribution of the histograms of the measured elastic moduli on cells. Furthermore, non-linear responses of cells may be present due to the high average pressures applied by sharp probes, which would lead to an overestimation of the Young's modulus. Pressure versus contact radius simulations for the different tip geometries for a 0.5 kPa sample suggested similar average pressure for Bio-MLCTs, PFQNM and cut tips, except spherical tips that showed much lower average pressure at the same 400 nm indentation. However, real data of the cells suggested different results. Using the same indentation depth (400 nm), PFQNM and Bio-MLCTs showed similar average pressure and it decreased for cut and spherical tips. The calculated contact area at 400 nm cell indentation, using the obtained apparent Young's modulus for each tip geometry, showed the following distribution: Bio-MLCTs < PFQNM < cut << spherical. In summary, tip geometry as well as average pressure and tip-sample contact area are important parameters to take into account when measuring mechanical properties of soft samples. The larger the tip radius, the larger the contact area that will lead to a more evenly distribution of the applied pressure.

Biomechanical Analysis of Yeast Cell Based a Piezoresistive Cantilever Sensor

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

Design of Piezoresistive Micro-Cantilever with Stress Concentration Regions

Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system

Dynamic Characterization of Small Fibers Based on the Flexural Vibrations of A Piezoelectric Cantilever Probe

Graphene piezoresistive flexible MEMS force sensor for bi-axial micromanipulation applications

Mems/Nems Mechanical Characterization on Different Thin - Film Materials by Scanning along Micro-Machined Cantilevers

Double-peak resonant mapping of cellular viscoelasticity in force-clamp detection of atomic force microscope

Simulation And Analysis Of Cantilever-Membrane Structure For Piezoresistive Micro-Accelerometers

DESIGN AND OPTIMIZATIONOF PARYLENE NANOMECHANICAL CANTILEVERSWITH INTEGRATEDPIEZORESISTORSFOR SURFACE STRESS BASED BIOCHEMICALSENSING

A microplatform for measurement of cell mechanical properties

Determination of Young's Modulus for Microcantilevers in Atomic Force Microscopy

In Situ Quantification of the Young’s Modulus of Nuclei in Multiple Cellular States Using a Modified Fiber Probe Sensor

Piezoelectric fiber-composite-based cantilever sensor for electric-field-induced strain measurement in soft electroactive polymer

Sensitivity in nanomechanical pedestal MEMS cantilever

Single cell mechanics analyzed by atomic force microscopy and finite element simulation

Micropore-array Confining Assisted Young's Modulus Measurement of Suspended Cells Using Atomic Force Microscopy

Automatic elasticity measurement of single cells using a microfluidic system with real-time image processing*

Role of material microstructure in plate stiffness with relevance to microcantilever sensors

Influence of cantilever tip geometry and contact model on AFM elasticity measurement of cells

Haptically Quantifying Young's Modulus of Soft Materials Using a Self‐Locked Stretchable Strain Sensor