Abstract:Fault tolerance is essential for quadruped robots when they work in remote areas or hazardous environments. Many fault-tolerant gaits planning method proposed in the past decade constrained more degrees of freedom(DOFs) of a robot than necessary. Thus a novel method to realize the fault-tolerant walking is proposed. The mobility of the robot is analyzed first by using the screw theory. The result shows that the translation of the center of body(CoB) can be kept with one faulty actuator if the rotations of the body are controlled. Thus the DOFs of the robot body are divided into two parts: the translation of the CoB and the rotation of the body. The kinematic model of the whole robot is built, the algorithm is developed to actively control the body orientations at the velocity level so that the planned CoB trajectory can be realized in spite of the constraint of the faulty actuator. This gait has a similar generation sequence with the normal gait and can be applied to the robot at any position. Simulations and experiments of the fault-tolerant gait with one faulty actuator are carried out. The CoB errors and the body rotation angles are measured. Comparing to the traditional fault-tolerant gait they can be reduced by at least 50%. A fault-tolerant gait planning algorithm is presented, which not only realizes the walking of a quadruped robot with a faulty actuator, but also efficiently improves the walking performances by taking full advantage of the remaining operational actuators according to the results of the simulations and experiments.

Fault Tolerance Properties and Motion Planning of a Six-Legged Robot with Multiple Faults.

Fault Tolerant Gaits For A Six-Legged Robot With One Locked Or Uncontrollable Failure

Fault Tolerance Criteria and Walking Capability Analysis of a Novel Parallel-Parallel Hexapod Break Walking Robot.

Meta-Reinforcement Learning of Hierarchical Fault-Tolerant Controller for Multiple Leg Failures in Hexapod Robots

Fault-tolerant motion planning for a hexapod robot with single-leg failure using a foot force control method

Kinematic Analysis and Motion Planning of A Quadruped Robot with Partially Faulty Actuators

Fault-Tolerant Tripod Gait Planning and Verification of a Hexapod Robot

Gait Planning for A Quadruped Robot with One Faulty Actuator

Fault-tolerant motion planning and generation of quadruped robots synthesised by posture optimization and whole body control

Fault-Tolerant Walking and Turning Gait Planning for Quadruped Robots with One Locked Leg on Rough Terrains

Gait Planning and Switching Strategy of Hexapod Robot with Single-Leg Failure

Autonomous Fault-Tolerant Gait Planning Research For Electrically Driven Large-Load-Ratio Six-Legged Robot

Hexapod Robot Fault Tolerant Gait on Slope and Simulation Verification

Fault-tolerant motion planning and control of redundant manipulator

Topology Configuration of Actuator Failure Mode of A Novel Quadruped Robot

Fault-tolerant Gait Design for Quadruped Robots with Two Locked Legs Using the GF Set Theory

A Novel Low-Cost Quadruped Robot with Joint Fault-Tolerant Control

Fault-tolerant gait design for quadruped robots with two locked legs using the G F set theory

A fault tolerant gait for a hexapod robot over uneven terrain

Study on Fault Tolerant Walking of Legged Robot with Single Leg Missing

Multi-Task Learning of Active Fault-Tolerant Controller for Leg Failures in Quadruped robots