Abstract:Aiming at the perturbation of motion capability and the deviation of end effector from its desired trajectory caused by joint effectiveness partial loss failure, a fault-tolerant control strategy considering motion capability optimization is proposed to ensure that the faulty space manipulator can carry on-orbit operation tasks. Firstly, the joint effectiveness partial loss failure model is established, and the kinematic and dynamic model of the faulty manipulator is established based on the failure model. The kinematic and dynamic coupling relationship of the faulty manipulator is also analyzed. Then based on sliding mode control, the fault-tolerant control strategy that ensures the end effector trajectory tracking and base orientation deflection attenuation is designed. Meanwhile, the motion capability optimization model is designed based on the redundancy characteristic of the manipulator and combined with the fault-tolerant control system. This combined system can realize end effector trajectory tracking, base orientation deflection attenuation, and motion capability optimization at the same time. Finally, simulation experiment is carried out to verify the proposed fault-tolerant control strategy for the faulty manipulator. The result shows that the proposed fault-tolerant control strategy can realize end effector trajectory tracking, base orientation deflection attenuation, and motion capability optimization with high control accuracy, high convergence rate, and significant motion capability optimization effect. For both joint velocity partial loss and joint torque partial loss failure, the duration of convergence is less than 0.5 s, the steady-state error is less than 1 x 10-4 m for end effector position and less than 1 x 10-5 degree for base orientation deflection, and the motion capability indexes have been raised by over 40%.

Topology Configuration of Actuator Failure Mode of A Novel Quadruped Robot

Kinematic Analysis and Motion Planning of A Quadruped Robot with Partially Faulty Actuators

Gait Planning for A Quadruped Robot with One Faulty Actuator

Fault Tolerance Properties and Motion Planning of a Six-Legged Robot with Multiple Faults.

Fault Tolerance Criteria and Walking Capability Analysis of a Novel Parallel-Parallel Hexapod Break Walking Robot.

Fault-Tolerant Tripod Gait Planning and Verification of a Hexapod Robot

Fault-tolerant motion planning and generation of quadruped robots synthesised by posture optimization and whole body control

Fault-tolerant motion planning for a hexapod robot with single-leg failure using a foot force control method

Fault-tolerant Gait Design for Quadruped Robots with Two Locked Legs Using the GF Set Theory

Fault-tolerant gait design for quadruped robots with two locked legs using the G F set theory

An Adaptive Actuator Failure Compensation Scheme for a Cooperative Manipulator System

Fault-tolerant gait design for quadruped robots with one locked leg using the G F set theory

A Novel Low-Cost Quadruped Robot with Joint Fault-Tolerant Control

Fault-Tolerant Walking and Turning Gait Planning for Quadruped Robots with One Locked Leg on Rough Terrains

A Neural Control Architecture for Joint-Drift-Free and Fault-Tolerant Redundant Robot Manipulators

Fault Tolerant Gaits For A Six-Legged Robot With One Locked Or Uncontrollable Failure

Multi-joint Manipulator Fault Diagnosis by Constructing Redundancy Residuals of Virtual Links

Multi-Task Learning of Active Fault-Tolerant Controller for Leg Failures in Quadruped robots

Fault-tolerant control strategy aiming at motion capability optimization for space manipulator with joint effectiveness partial loss failure

Design and Analysis of High Dynamic Actuator and Implementation on Quadruped Robot

On-Line Fault-Tolerant Fuzzy-Based Path Planning and Obstacles Avoidance Approach for Manipulator Robots