Abstract:With the rapid development of modern electronic technology, addressing the heat dissipation problem of devices has become more and more urgent. Herein, the effects of molybdenum disulfide (MoS2) and hybrid hexagonal boron nitride (h-BN)/MoS2 fillers on the thermal conductivity of polydimethylsiloxane (PDMS) were investigated by reverse non-equilibrium molecular dynamics (RNEMD) simulation with fully atomistic model. Firstly, we simulated the thermal conductivity of MoS2 and BN fillers. It was found that the thermal conductivity of the two fillers enhanced with the increase of their sizes. The intrinsic thermal conductivity of MoS2 and BN obtained via the extrapolation were 52 W/(m·K) and 606 W/(m·K) separately. For 1-5 layers, the number of layers has almost no effect on the thermal conductivity of MoS2, but as the number of layers increase, the thermal conductivity of BN first decreases and then reaches a plateau. Then, we studied the thermal conductivity of the PDMS-based composites. Due to the existence of holes in the PDMS/MoS2 system, the thermal conductivity of PDMS/MoS2 composites is not much improved compared with that of PDMS. Therefore, we then introduced a hybrid BN/MoS2 filler into the composite to solve the void problem in the system. The results proved that this method was effective. The introduction of the hybrid BN/MoS2 filler effectively promoted the dispersion of the two fillers in the PDMS matrix and greatly reduced the holes in the composites. Compared with the composites filled with only one kind of filler, PDMS/BN/MoS2 composites possess better thermal conductivity. The most surprising finding is that there exists an optimal loading ratio of the two fillers, and the thermal conductivity of the composite reached the maximum when the mass ratio of the two fillers is approximately 1:1, attributed to the change of the volume fraction of holes(<math>Φ</math>). In addition, with the increase of hybrid BN/MoS2 filler content, the thermal conductivity of the composites is also increasing. The oscillating shear can also promote the orientation of the filler along the shear direction and improve the thermal conductivity of composites along that direction. Therefore, composites based on hybrid BN/MoS2 nano-fillers can be used to improve the thermal conductivity of insulating polymer materials. The findings should shed some light on the design and preparation of polymer composites with excellent thermal conductivity and electrical insulation properties.

Effects and mechanism of filler surface coating strategy on thermal conductivity of composites: A case study on epoxy/SiO2-coated BN composites

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

Theoretical study on thermal conductivity of epoxy composites doped with boron nitride with multiple dimensions

Electroless deposition surface engineering of boron nitride sheets for enhanced thermal conductivity and decreased interfacial thermal resistance of epoxy composites

Single effect of filler spatial distribution states on the thermal conductivity of epoxy composites and their heat conduction mechanisms

Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets

Tuned Local Surface potential of Epoxy Resin Composites by Inorganic Core-Shell Microspheres: The key roles of interface.

Study on thermal conductivity of micron BN-nano SiO2 combined modified epoxy resin composites

Effects of filler distribution and interface thermal resistance on the thermal conductivity of composites filling with complex shaped fillers

Boride ceramics covalent functionalization and its effect on the thermal conductivity of epoxy composites

The Investigation of the Effect of Filler Sizes in 3D-BN Skeletons on Thermal Conductivity of Epoxy-Based Composites

Enhanced Thermal Conductivity of Epoxy Composites with Core-Shell SiC@SiO2 Nanowires

Enhanced Thermal Conductivity of Composite Materials by Filling Sheet and Fiber Under Effect of Filler Contact

Enhanced Thermal Conductivities of Epoxy Nanocomposites Via Incorporating In-Situ Fabricated Hetero-Structured SiC-BNNS Fillers

Role of Interface on the Thermal Conductivity of Highly Filled Dielectric Epoxy/AlN Composites

Enhanced thermal conductivity of epoxy composites filled with silicon carbide nanowires

Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances

Synergetic enhancement of thermal conductivity in the silica-coated boron nitride (SiO 2 @BN)/polymethyl methacrylate (PMMA) composites

Nest-like hetero-structured BNNS@SiCnws fillers and significant improvement on thermal conductivities of epoxy composites

Studies of Experimental and Numerical Analyses of Thermal Conductivity of (ti/zr) B-2-Filled Epoxy Matrix Composites

Designing high thermal conductivity of polydimethylsiloxane filled with hybrid h-BN/MoS2 via molecular dynamics simulation