Abstract:An ultrahigh piezoelectric coefficient is always desired for electromechanical devices and systems. However, for a long time, a large d(33) value in lead-based and lead-free piezoelectric ceramics was usually obtained at the expense of their T-c, and vice versa, limiting their practical applications. Here, we proposed a design concept, i.e., integrating phase boundary and defect engineering, to resolve the above challenges, based on a concrete example of Fe-modified 0.5 1 Pb(Hf0.35Ti0.65)O-3-0.49Pb(Nb2/3Ni1/3)O-3 (0.5 1PHT-0.49PNN) ceramics. An abnormally high d(33) value of 1124 pC/N and a T-c of 133 degrees C were achieved simultaneously in this study, which are obviously superior to those of other reported representative lead-based and lead-free piezoelectric ceramics, which made a giant step forward in both piezoelectric material research and electromechanical applications. A large strain response of 0.28% and low hysteresis were also obtained under an applied field of 20 kV/cm in the 0.51PHT-0.49PNN ceramic. The phase-field simulations and piezoresponse force microscopy demonstrated that the high piezoelectric performance should be attributed to the formation of mesoscopic domains resulting from morphotropic phase boundary and defect dipoles. Most importantly, this work provides an avenue for the development of piezoelectric ceramics with ultrahigh d(33) and high T(c )and has the potential to lead to the development of a range of high-performance Pb-based ceramics for electromechanical applications in the future.

High mechanical quality factor and high piezoelectric coefficient achieved via acceptor-modified invisible boundary

Significantly enhanced mechanical quality factor of acceptor-doped quadruple point composition in lead-free Ba(Zr,Ti)O3 ceramics

Large electric‐field‐induced strain and enhanced piezoelectric constant in CuO‐modified BiFeO3‐BaTiO3 ceramics

Ultrahigh Piezoelectric Response Obtained by Artificially Generating a Large Internal Bias Field in BiFeO3–BaTiO3 Lead‐Free Ceramics

Extremely High Piezoelectric Properties in Pb-Based Ceramics Through Integrating Phase Boundary and Defect Engineering

Modified Pb(Mg1/3Nb2/3)O3-PbZrO3-PbTiO3 Ceramics with High D33，large Qm and High Tc

Defect engineering in barium titanate ferroelectric ceramic showing simultaneous enhancement of piezoelectric coefficient and mechanical quality factor

Modified Pb(Mg1/3Nb2/3)O 3-Pbzro 3-Pbtio 3 Ceramics with High D 33, Large Q M and High T C

Achieving Both High D 33 and High Q M for the Pb(Zr 0.26 Sn 0.26 Ti 0.48 ) 1− X Fe X O 3− X /2 Ternary System for Use in High-Power Ultrasonic Transducers

High Electrostrictive Coefficient Q(33) in Lead-Free Ba(Zr0.2ti0.8)O-3-X(Ba0.7ca0.3)Tio3 Piezoelectric Ceramics

Large Piezoelectric Effect in Pb-Free Ceramics

Grain Boundary Diffusion Hardening in Potassium Sodium Niobate-Based Ceramics with Full Gradient Composition and High Piezoelectricity

High-Performance Sm-Doped Pb(Mg1/3Nb2/3)O3-PbZrO3-PbTiO3-Based Piezoceramics.

Enhanced Piezoelectric Properties of (ba1−xcax)(ti0.92sn0.08)o3 Lead‐Free Ceramics

Sm2O3 and MnO2 codoped PMN-PZT ceramics with both high mechanical quality factor and piezoelectric properties

New Degree of Freedom in Determining Superior Piezoelectricity at the Lead-Free Morphotropic Phase Boundary: The Invisible Ferroelectric Crossover

Outstanding electromechanical performance in piezoelectric ceramics via synergistic effects of defect engineering and domain miniaturization

Practical High Piezoelectricity in Barium Titanate Ceramics Utilizing Multiphase Convergence with Broad Structural Flexibility.

Ultra‐high‐temperature piezoelectric responses and ultra‐high thermal stability of piezoelectricity in ceramic PbZr 0.54 Ti 0.46 O 3

Superior high-temperature piezoelectric performances in BF-PT-BT ceramics via electric field constructed phase boundary

Exceptionally High Piezoelectric Coefficient and Low Strain Hysteresis in Grain-Oriented (Ba, Ca)(Ti, Zr)O 3 through Integrating Crystallographic Texture and Domain Engineering.