Abstract:Inspired by the chirped pulse amplification technique, herein, we show an efficient method to improve the distribution probability of dissipative soliton and noise-like pulse in all-normal-dispersion fiber lasers by using an intracavity pulse power editing (PPE) technique for the first time. The dissipative-soliton fiber laser is thus simplified into three parts: a PPE link, a saturable absorber (SA), and a spectral filter. Pulse with different peak powers can be edited in the PPE link, then undergo the positive- or reverse-saturable absorption of the SA, and finally pass through the filter. Further, just by assigning the length of single-mode fiber (SMF) at different positions in the PPE link with a fixed cavity length, four pulse patterns, including dissipative soliton (DS), DS molecules, a bound pattern of DS and noise-like pulse (NLP), and pure NLP, can be controllably produced in fiber lasers. The observed bound pattern of DS and NLP is a new addition to the pulse dynamic pattern family. It is found that the longer the SMF after the gain fiber is, the pulse will be severely broadened. This pulse can easily enter the positive-saturable absorption region of most saturated absorption curves, which will increase the probability of DS radiation; if the SMF behind the gain fiber is shorter, the pulse is not severely broadened. The pulse has a high probability of entering the reverse-saturable absorption range of most saturated absorption curves, resulting in a higher likelihood of generating NLP. In experiments, it is only necessary to increase the SMF length between the gain fiber and the isolator to build a DS fiber laser; however, to construct an NLP fiber laser, only the SMF length between the gain fiber and the isolator needs to be shortened. The experimental results agree well with the numerical predictions. The results significantly broaden the design possibilities for pulse lasers, making them much more accessible to produce specific pulse patterns.

Optimal Design of Similariton Fiber Lasers Without Gain-Bandwidth Limitation.

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Optimal Design of High Energy Similariton Thulium-Doped Fiber Lasers

Generation of Sub-60 Fs Similaritons at 1.6 Mu M from an All-Fiber Er-Doped Laser

All-fiber Similariton Ultrashort Pulse Laser Systems at Erbium-Doped Wavelengthband

Similariton-like Pulse Evolution in an Er-Doped Fiber Laser with Hybrid Mode Locking

All-Fiber Ultrashort Similariton Generation, Amplification, and Compression at Telecommunication Band

High-Power Femtosecond Self-Similar Fiber Amplification System

Ultra-broadband high-energy pulse generation and evolution in a compact erbium-doped all-fiber laser

Direct observation of the build-up and extinction of similaritons in an all-normal dispersion fiber laser

High-Power Self-Similar Amplification Seeded by A 1ghz Harmonically Mode-Locked Yb-Fiber Laser

High-Average-Power Femtosecond Fiber Self-Similar Amplification

Pre-chirping management of a self-similar Yb-fiber amplifier towards 80 W average power with sub-40 fs pulse generation.

Observations of four types of pulses in a fiber laser with large net-normal dispersion.

Fast Self-Similar Amplification Through Passive Nonlinear Pulse Pre-Shaping

Efficient Method to Improve the Distribution Probability of Dissipative Soliton and Noise-Like Pulse in All-Normal-dispersion Fiber Lasers

Self-similar Evolution in a Short Fiber Amplifier Through Nonlinear Pulse Preshaping.

Breathing Dynamics in a Gain-Guided Dissipative Soliton-Similariton Fiber Laser

Cavity-length Optimization for High Energy Pulse Generation in a Long Cavity Passively Mode-Locked All-Fiber Ring Laser

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Pulse Evolution Characteristics in Self-Similar Mode-Locked Fibre Laser