Abstract:Safety and the polysulfide shuttle reaction are two major challenges for liquid electrolyte lithium–sulfur (Li–S) batteries. Although use of solid‐state electrolytes can overcome these two challenges, it also brings new challenges by increasing the interface resistance and stress/strain. In this work, the interface resistance and stress/strain of sulfur cathodes are significantly reduced by conformal coating ≈2 nm sulfur (S) onto reduced graphene oxide (rGO). An Li–S full cell consisting of an rGO@S‐Li10GeP2S12‐acetylene black (AB) composite cathode is evaluated. At 60 °C, the all‐solid‐state Li–S cell demonstrates a similar electrochemical performance as in liquid organic electrolyte, with high rate capacities of 1525.6, 1384.5, 1336.3, 903.2, 502.6, and 204.7 mA h g−1 at 0.05, 0.1, 0.5, 1.0, 2.0, and 5.0 C, respectively. It can maintain a high and reversible capacity of 830 mA h g−1 at 1.0 C for 750 cycles. The uniform distribution of the rGO@S nanocomposite in the Li10GeP2S12‐AB matrix generates uniform volume changes during lithiation/delithiation, significantly reducing the stress/strain, thus extending the cycle life. Minimization of the stress/strain of solid cells is the key for a long cycle life of all‐solid‐state Li–S batteries. A ≈2 nm amorphous sulfur‐coated reduced graphene oxide composite is employed in all‐solid‐state lithium–sulfur batteries. The composite can significantly reduce the interface resistance and stress/strain of sulfur cathodes, thus leading to an ultrastable all‐solid‐state lithium–sulfur battery with excellent rate capability and cycling stability, showing reversible capacities of 830 mA h g−1 at 1.0 C for 750 cycles.

Construction of All-Solid-State Batteries Based on A Sulfur-Graphene Composite and Li9.54si1.74p1.44s11.7cl0.3 Solid Electrolyte

Cover Feature: Construction of All-Solid-State Batteries based on a Sulfur-Graphene Composite and Li<sub>9.54</sub> Si<sub>1.74</sub> P<sub>1.44</sub> S<sub>11.7</sub> Cl<sub>0.3</sub> Solid Electrolyte (Chem. Eur. J. 56/2017)

All-solid-state lithium-sulfur batteries assembled by composite polymer electrolyte and amorphous sulfur/rGO composite cathode

High‐Performance All‐Solid‐State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur‐Coated Reduced Graphene Oxide Cathodes

Improved lithium-ion and electrically conductive sulfur cathode for all-solid-state lithium–sulfur batteries

Electrochemical Performance of Graphene-Modulated Sulfur Composite Cathodes Using LiBH4 Electrolyte for All-Solid-State Li-S Battery

Exploring the Concordant Solid-State Electrolytes for All-Solid-state Lithium-Sulfur Batteries

High-Performance All-Solid-State Lithium–Sulfur Batteries Enabled by Slurry-Coated Li6PS5Cl/S/C Composite Electrodes

Dual-Protection of A Graphene-Sulfur Composite by A Compact Graphene Skin and an Atomic Layer Deposited Oxide Coating for A Lithium-Sulfur Battery

Li2s@C Composite Incorporated into 3d Reduced Graphene Oxide As A Cathode Material for Lithium-Sulfur Batteries

Rational Design of Multi-Channel Continuous Electronic/ionic Conductive Networks for Room Temperature Vanadium Tetrasulfide-Based All-Solid-state Lithium-Sulfur Batteries

Preparation of rGO-S-CPEs Composite Cathode and Electrochemical Performance of All-Solid-State Lithium-Sulfur Battery

High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite

A new high-capacity cathode for all-solid-state lithium sulfur battery

Interface polymerization synthesis of conductive polymer/graphite oxide@sulfur composites for high-rate lithium-sulfur batteries

Hierarchical High‐Porosity Graphene Oxide‐Porous Carbon/Sulfur Composite with Sodium Chloride As Temporary Space Holders for High‐Performance Lithium‐Sulfur Batteries

Improvement in the Performance of Composite Cathode via Solid Electrolyte for High Electrochemical Performance of Li–S Battery

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries

All-solid-state lithium–sulfur batteries based on a newly designed Li7P2.9Mn0.1S10.7I0.3 superionic conductor

Molybdenum trisulfide based anionic redox driven chemistry enabling high-performance all-solid-state lithium metal batteries

Polymer Electrolyte/Sulfur Double-Shelled Anisotropic Reduced Graphene Oxide Lamellar Scaffold Enables Stable and High-Loading Cathode for Quasi-Solid-State Lithium-Sulfur Batteries