Abstract:Steel-basalt hybrid fibers reinforced cementitious composite (SBFRCC) is a potential reinforce-ment and repair material for engineering structures with fire risk due to its excellent mechanical properties exposed to ambient and high temperatures. However, the bonding properties between SBFRCC and existing concrete are still unclear, especially at high temperatures. To fill this gap, the bonding properties between SBFRCC and existing concrete at high temperatures were investigated based on two situations by using the slant shear and splitting tensile tests. First, the existing concrete was heated at high temperatures and then bonded with SBFRCC and strengthening concrete to form combined systems, respectively. The effects of the interface roughness, high temperature duration, and post-fire-curing on their bonding properties were investigated. Second, the existing concrete was bonded with SBFRCC and then heated at high temperatures, and the effects of fly ash substation rates on the bonding properties were studied. Besides, the backscattered-electron (BSE) was used to observe the interface between the exiting concrete and SBFRCC exposed to various temperatures. Results show that the first bonded and then heated specimens are slide-failed and separated at the bonding interface from room tem-perature to 600 degrees C, while the damage is generated within the existing concrete at 800 degrees C. SBFRCC has better high temperature resistance than the existing concrete. The slant shear and splitting tensile strengths between PC-A and SBFRCC are 9%-33.3% higher than that of PC-A and strengthening concrete at all temperatures. The appropriate roughness at the interface by pol-ishing can significantly improve the bonding properties between the existing concrete and SBFRCC. The bonding strength is recovered by more than 18.2% and 29.8% after the post-fire curing of 28 and 90 d, respectively. The increase of fly ash substitution rates has a certain contribution to the bonding properties above 600 degrees C.

Assessment of Bond-Slip Performance of Fire Exposed High Strength Concrete with SD Rebar

Experimental Investigation on Influence of Embedment Length, Bar Diameter and Concrete Cover on Bond Between Reinforced Bars and Steel Fiber Reinforced Concrete (SFRC)

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Analytical Model for the Bond Stress-Slip Relationship of Deformed Bars in Normal Strength Concrete

Analytical Model for Predicting the Post-Fire Bond Behavior Between Steel Bars and Concrete

Tests on the Steel–Concrete Bond Strength in Steel Reinforced Concrete (SRC) Columns after Fire Exposure

Residual bond‐slip behavior in reinforced concrete members exposed to elevated temperatures

Interfacial Bond Behavior of High Strength Concrete Filled Steel Tube after Exposure to Elevated Temperatures and Cooled by Fire Hydrant

Test study on the bond stress-slip relationship between concrete and steel bars

Bond Behavior of Spiral Ribbed Ultra-high Strength Steel Rebar Embedded in Plain and Steel Fiber Reinforced High-Strength Concrete

Test Study on Bond Stress-Slip Relationship of Concrete and Steel Bar

Bond behaviour at high temperatures between concrete and CFRP or steel strengthening bars applied according to the Embedded Through-Section (ETS) technique

Bond-slip behavior of steel reinforced UHPC under flexure: Experiment and prediction

Bond Behavior of Concrete-Filled Steel Tubes at Elevated Temperatures

Post-fire bond behaviour in elliptical concrete filled steel tubes: Experiment and simulation

EXPERIMENTAL STUDY ON BOND-SLIP BETWEEN ULTRA HIGH TOUGHNESS CEMENTITIOUS COMPOSITES AND STEEL BAR

Prediction of residual bond strengths between corroded steel bars and concrete after exposure to high temperatures

Investigation of the bond properties between hybrid fiberreinforced concrete and BFRP bars after exposure to high temperature

Study on Bond-Slip Behavior between Seawater Sea-Sand Concrete and Carbon Fiber-Reinforced Polymer (CFRP) Bars with Different Surface Shapes

Experimental research on bond strength between rebar and concrete after high temperature

Bond Behavior Between High-Strength Recycled Aggregate Concrete and UHSSB Using Beam Test