Abstract:Detailed investigations were conducted at a facility that manufactures and processes carbon nanofibers (CNFs). Presented research summarizes the direct-reading monitoring aspects of the study. A mobile aerosol sampling platform, equipped with an aerosol instrument array, was used to characterize emissions at different locations within the facility. Particle number, respirable mass, active surface area, and photoelectric response were monitored with a condensation particle counter (CPC), a photometer, a diffusion charger, and a photoelectric aerosol sensor, respectively. CO and CO(2) were additionally monitored. Combined simultaneous monitoring of these metrics can be utilized to determine source and relative contribution of airborne particles (CNFs and others) within a workplace. Elevated particle number concentrations, up to 1.15 x 10(6) cm(-3), were found within the facility but were not due to CNFs. Ultrafine particle emissions, released during thermal treatment of CNFs, were primarily responsible. In contrast, transient increases in respirable particle mass concentration, with a maximum of 1.1 mg m(-3), were due to CNF release through uncontrolled transfer and bagging. Of the applied metrics, our findings suggest that particle mass was probably the most useful and practical metric for monitoring CNF emissions in this facility. Through chemical means, CNFs may be selectively distinguished from other workplace contaminants (Birch et al., in preparation), and for direct-reading monitoring applications, the photometer was found to provide a reasonable estimate of respirable CNF mass concentration. Particle size distribution measurements were conducted with an electrical low-pressure impactor and a fast particle size spectrometer. Results suggest that the dominant CNF mode by particle number lies between 200 and 250 nm for both aerodynamic and mobility equivalent diameters. Significant emissions of CO were also evident in this facility. Exposure control recommendations were described for processes as required.

Near Real-Time Measurement of Carbonaceous Aerosol Using Microplasma Spectroscopy: Application to Measurement of Carbon Nanomaterials

New Approach for Near-Real-Time Measurement of Elemental Composition of Aerosol Using Laser-Induced Breakdown Spectroscopy

Real-Time Measurement of Airborne Carbon Nanotubes in Workplace Atmospheres.

Spatial and Temporal Dynamics of a Pulsed Spark Microplasma Used for Aerosol Analysis

Real-time detection of molecular structures and metal components within airborne particles using concurrent Raman and Spark emission spectroscopy

Characterization of an Aerosol Microconcentrator for Analysis Using Microscale Optical Spectroscopies.

Analysis of Crystalline Silica Aerosol Using Portable Raman Spectrometry: Feasibility of Near Real-Time Measurement.

Rapid Elemental Analysis of Aerosols Using Atmospheric Glow Discharge Optical Emission Spectroscopy.

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Aerosol monitoring during carbon nanofiber production: mobile direct-reading sampling

Scanning Supersaturation Condensation Particle Counter Applied As a Nano-Ccn Counter for Size-Resolved Analysis of the Hygroscopicity and Chemical Composition of Nanoparticles

AC Driven Microplasma for Multielement Excitation and Determination by Optical Emission Spectrometry.

A New Instrument Prototype to Measure the Geometric Surface Area of Nanoparticles with a Time Resolution of 1S

A Miniature Chemiluminescence Spectrometric System Induced by Atmosphere Microplasma Jet to Avoid Using Hydrogen Peroxide and Catalyst.

A Field-Portable Plasma Source Monitor for Real-Time Air Particulate Monitoring

Chip-based ingroove microplasma with orthogonal signal collection: new approach for carbon-containing species detection through open air reaction for performance enhancement

Real-time Measurement of Nano-Agglomerate and Aggregate Mass and Surface Area Concentrations with a Prototype Instrument

Electrical Mobility Spectrometer Using a Diethylene Glycol Condensation Particle Counter for Measurement of Aerosol Size Distributions Down to 1 Nm

Microplasma Nanoengineering of Hybrid Plasmonic Nanostructures for Rapid and Ultrasensitive Surface-Enhanced Raman Scattering-Based Sensing

Characterization of the Analytical Capabilities of an Atmospheric Micro‐plasma Device for the Detection of Nonmetals

Integrated Aerodynamic/electrochemical Microsystem for Collection and Detection of Nanogram-Level Airborne Bioaccessible Metals