Abstract:Buildings utilize both inorganic and organic insulation materials to conserve energy and prevent heat loss. However, while exhibiting excellent thermal insulation performance, organic insulation materials increase the risk of fire due to the emission of intense heat and toxic smoke in the event of a fire. Conversely, inorganic insulation materials are characterized by a lower thermal insulation performance, leading to an increase in the weight of the building with extensive use. Therefore, the necessity for research into new insulation materials that address the drawbacks of existing ones, including reducing weight, enhancing fire resistance, and improving thermal insulation performance, has been recognized. This study focuses on evaluating the enhancement of the thermal insulation performance using novel building materials compared to conventional ones. The research methodology involved the incorporation of porous aerogel powders into paper-based cellulose insulation to improve its insulating properties. Samples were prepared in standard 100 × 100 mm2 panel forms. Two control groups were utilized: a pure control group, where specimens were fabricated using 100% recycled cardboard for packaging, and a mixed control group, where specimens were produced using a mixture ratio of 30 wt% ceramic binder and 40 wt% expandable graphite. Experimental group specimens were prepared by increasing the aerogel content from 200 to 1000 mL under each condition of the control groups (pure and mixed) after mixing. The thermal insulation performance of the specimens was evaluated in terms of thermal conductivity and thermal diffusivity according to ISO 22007-2 (for solids, paste, and powders). Through this study, it was found that the thermal insulation performances of the pure control and experimental groups improved by 16.66%, while the mixed control and experimental groups demonstrated a 17.06% enhancement in thermal insulation performance with the addition of aerogel.

Preparation Of Heat Insulation Paper Based On Fiber Loading By In-Situ Deposition Of Aluminium Silicate

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Strength and thermal insulation properties of foam-formed ceramic fiber paper with different reinforcement methods

Study on the Suitability of Bamboo Fiber for Manufacturing Insulating Presspaper

Preparation of modified ammonium polyphosphate blended aqueous boron phenolic resin and its application to insulating paper

Heat-Treated Aramid Pulp/Silica Aerogel Composites with Improved Thermal Stability and Thermal Insulation

Preparation and thermal‐mechanical property evaluation of cellulose insulation paper with differing nano‐SiC contents

Fabrication of Al2O3 aerogel-SiO2 fiber composite with enhanced thermal insulation and high heat resistance

Preparation of ultrafine flexible alumina fiber for heat insulation by the electrospinning method

Homogeneous reinforcement as a strategy for the efficient preparation of high-strength, insulating and high heat-resistant PBO composite paper

A Study on the Evaluation of Thermal Insulation Performance of Cellulose-Based Silica Aerogel Composite Building Materials

Preparation of needled nonwoven enhanced silica aerogel for thermal insulation

Novel method of fabricating lightweight thermally insulation fibrous composites for energy saving

Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite

Alumina-Doped Silica Aerogels for High-Temperature Thermal Insulation

Effect of Nano Al2O3 Doping on Thermal Aging Properties of Oil-Paper Insulation

Preparation and properties of thermal insulation coating based on silica aerogel

Molecular dynamics simulations guided the preparation of nano-silica/polyimide/cellulose composite insulating paper

Enhancing heat dissipation in polyurethane sheets through the incorporation of freeze‐dried aluminum nitride nanofiber

Design, Characterization, and Incorporation of the Alkaline Aluminosilicate Binder in Temperature-Insulating Composites

Research on fire resistance of silica fume insulation mortar