Abstract:Motion analysis is of great interest to a variety of applications, such as virtual and augmented reality and medical diagnostics. Hand movement tracking systems, in particular, are used as a human–machine interface. In most cases, these systems are based on optical or acceleration/angular speed sensors. These technologies are already well researched and used in commercial systems. In special applications, it can be advantageous to use magnetic sensors to supplement an existing system or even replace the existing sensors. The core of a motion tracking system is a localization unit. The relatively complex localization algorithms present a problem in magnetic systems, leading to a relatively large computational complexity. In this paper, a new approach for pose estimation of a kinematic chain is presented. The new algorithm is based on spatially rotating magnetic dipole sources. A spatial feature is extracted from the sensor signal, the dipole direction in which the maximum magnitude value is detected at the sensor. This is introduced as the "maximum vector". A relationship between this feature, the location vector (pointing from the magnetic source to the sensor position) and the sensor orientation is derived and subsequently exploited. By modelling the hand as a kinematic chain, the posture of the chain can be described in two ways: the knowledge about the magnetic correlations and the structure of the kinematic chain. Both are bundled in an iterative algorithm with very low complexity. The algorithm was implemented in a real-time framework and evaluated in a simulation and first laboratory tests. In tests without movement, it could be shown that there was no significant deviation between the simulated and estimated poses. In tests with periodic movements, an error in the range of 1° was found. Of particular interest here is the required computing power. This was evaluated in terms of the required computing operations and the required computing time. Initial analyses have shown that a computing time of 3 μs per joint is required on a personal computer. Lastly, the first laboratory tests basically prove the functionality of the proposed methodology.

A Novel 6-D Pose Detection Method Using Opposing-Magnet Pair System

An Improved 6D Pose Detection Method Based on Multiple Magnets Tracking

An Improved 6-D Pose Detection Method Based on Opposing-Magnet Pair System and Constraint Multiple Magnets Tracking Algorithm

A Compact and Robust 6-DoF Pose Tracking System Using Magnetic-Inertial Sensors and a Single Uniaxial Electromagnetic Coil

A Novel 6-D Tracking Method by Fusion of 5-D Magnetic Tracking and 3-D Inertial Sensing

A Novel Non-Model-Based 6-Dof Electromagnetic Tracking Method Using Non-Iterative Algorithm

A Robust Tri-Electromagnet-Based 6-DoF Pose Tracking System Using an Error-State Kalman Filter

6-D Magnetic Localization and Orientation Method for an Annular Magnet Based on a Closed-Form Analytical Model

Multiple Objects Positioning and Identification Method Based on Magnetic Localization System

AMagPoseNet: Real-Time Six-DoF Magnet Pose Estimation by Dual-Domain Few-Shot Learning from Prior Model

An analytic algorithm based position and orientation detection using a tri-axial magnetoresistive sensor.

Hand-Finger Pose Estimation Using Inertial Sensors, Magnetic Sensors and a Magnet

6-D Electromagnetic Tracking Approach Using Uniaxial Transmitting Coil and Tri-Axial Magneto-Resistive Sensor

Estimate Hand–Finger Position with One Magnetometer and Known Relative Orientation

A Novel Method of Localization for Moving Objects with an Alternating Magnetic Field

Localization of Ferromagnetic Target with Three Magnetic Sensors in the Movement Considering Angular Rotation.

Six-degree-of-freedom Localization Under Multiple Permanent Magnets Actuation

Real-Time Multi-Object Magnetic Tracking for Multi-Arm Continuum Robots

A Position Measurement Method for 3-Degree-of-freedom Motion Based on Magnetic Detection.

An Electromagnetic Tracking Method Using Rotating Orthogonal Coils

A New Iterative Algorithm for Magnetic Motion Tracking