Abstract:Background and objectives: Magnetic tracking involves the use of magnetic sensors to localize one or more magnetic objectives, in those applications in which a free line-of-sight between them and the operator is hampered. We applied this concept to prosthetic hands, which could be controlled by tracking permanent magnets implanted in the forearm muscles of amputees (the myokinetic control interface). Concerning the system design, the definition of a sensor distribution which maximizes the information, while minimizing the computational cost of localization, is still an open problem. We present a simple yet effective strategy to define an optimal sensor set for tracking multiple magnets, which we called the Peaks method. Methods: We simulated a proximal amputation using a 3D CAD model of a human forearm, and the implantation of 11 magnets in the residual muscles. The Peaks method was applied to select a subset of sensors from an initial grid of 480 elements. The approach involves setting an appropriate threshold to select those sensors associated with the peaks in the magnetic flux density and its gradient distributions. Selected sensors were used to track the magnets during muscle contraction. For validating our strategy, an alternative method based on state-of-the-art solutions was implemented. We finally proposed a calibration phase to customize the sensor distribution on the specific patient's anatomy. Results: 80 sensors were selected with the Peaks method, and 101 with the alternative one. A localization accuracy below 0.22 mm and 1.86° for position and orientation, respectively, was always achieved. Unlike alternative methods from the literature, neither iterative or analytical solution, nor a-priori knowledge on the magnet positions or trajectories were required, and yet the outcomes achieved with the two strategies proved statistically comparable. The calibration phase proved useful to adapt the sensors to the patient's stump and to increase the signal-to-noise ratio against intrinsic noise. Conclusions: We demonstrated an efficient and general solution for solving the design optimization problem (i.e. identifying an optimal sensor set) and reducing the computational cost of localization. The optimal sensor distribution mirrors the field shape traced by the magnets on the sensing surface, being an intuitive and fast way of achieving the same results of more complex and application-specific methods. Several applications in the (bio)medical field involving magnetic tracking will benefit from the outcomes of this work.

Real-Time Multi-Object Magnetic Tracking for Multi-Arm Continuum Robots

Multi-Magnet Tracking Method Using Extended Kalman Filter*

Dynamic Tracking for Microrobot with Active Magnetic Sensor Array

Real-Time Tracking And Navigation For Magnetically Manipulated Untethered Robot

A Compact and Robust 6-DoF Pose Tracking System Using Magnetic-Inertial Sensors and a Single Uniaxial Electromagnetic Coil

Shape Tracking and Navigation for Continuum Surgical Robot Based on Magnetic Tracking.

An Augmented Extended Kalman Filter-based Algorithm for Magnetic Tracking

Optimal Spatial Sensor Design for Magnetic Tracking in a Myokinetic Control Interface

An Optically Aided Magnetic Tracking Approach for Magnetically Actuated Capsule Robot

A Differential Signal and Extended-Kalman-Filter-Based Anti-Interference Magnetic Tracking Method for Surgical Scenes

A Robust Tri-Electromagnet-Based 6-DoF Pose Tracking System Using an Error-State Kalman Filter

Vision-Based Markerless Tracking for Continuum Surgical Instruments in Robot-Assisted Minimally Invasive Surgery

Multipoint Simultaneous Tracking of Wireless Capsule Endoscope Using Magnetic Sensor Array

A New Tracking System for Three Magnetic Objectives

Preliminary Study on Magnetic Tracking Based Navigation for Wire-Driven Flexible Robot

Electromagnetic Positioning for Tip Tracking and Shape Sensing of Flexible Robots

Improved Multiple Objects Tracking Based Autonomous Simultaneous Magnetic Actuation & Localization for WCE

A Real-Time Self-Sensing Approach to Sensor Array Configuration Fusing Prior Knowledge for Reconfigurable Magnetic Tracking Systems

Multiple Objects Positioning and Identification Method Based on Magnetic Localization System

Closed-Loop Magnetic Manipulation for Robotic Transesophageal Echocardiography

Online Dual Neural Network Receding-Horizon Tracking Control for Magnetic Actuated Endoscopic Robots