Abstract:Optimization of three-dimensional (3D) print conditions for material extrusion of plastics by fused filament fabrication typically involves trade-offs between mechanical properties and dimensional accuracy due to their orthogonal requirements. Increased polymer mobility improves the mechanical properties by chain diffusion to strengthen the interfaces between printed roads, but flow associated with the high polymer mobility leads to inaccuracies. Here, we describe the application of a model core–shell geometry in filaments to address these trade-offs and understand the material requirements to achieve improved dimensional accuracy. Systematic variation of the core with commercial polycarbonate-based plastics and a common high-density polyethylene (HDPE) shell illustrates that tensile properties obtained with these filaments are relatively insensitive to printing conditions and selection of the core polymer, but the dimensional accuracy of the printed part improves markedly as the glass transition temperature of the core polymer increases. The impact resistance of the core–shell-based parts is dependent on the selection of the core polymer with a significant decrease in impact resistance for the lowest modulus core examined. Although warping can be mostly mitigated with the core–shell filaments, the printed object is generally smaller than the digital source due to large volume change associated with HDPE crystallization. The dimensional accuracy is dependent on the solidification temperature and mechanical properties of the polymers comprising the filament, print conditions, and the local geometry of the object as quantified by layer-by-layer analysis of 3D scanned images of the printed objects. Both processing changes and some structures in the digital object that can degrade the dimensional accuracy are identified through this analysis. The core–shell filament structure represents a model geometry to understand the potential for the printing of polymer blends where separation of solidification temperatures in cocontinuous blends could provide a route to improve performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.1c00110?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.1c00110</a>.Additional experimental protocols, filament cross-sections, DSC thermograms, images and characterization of printed impact bars, local deviations in dimensions between print and digital source, raw impact data, void fraction analysis, and tensile stress–strain curves (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.1c00110/suppl_file/ap1c00110_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Large Scale 3D Printing: Influence of Fillers on Warp Deformation and on Mechanical Properties of Printed Polypropylene Components

Enhanced Dimensional Accuracy of Material Extrusion 3D-Printed Plastics through Filament Architecture

Effects of Fiber Orientation on the Coefficient of Thermal Expansion of Fiber-Filled Polymer Systems in Large Format Polymer Extrusion-Based Additive Manufacturing

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Dimensional accuracy and simulation-based optimization of polyolefins and biocopolyesters for extrusion-based additive manufacturing and steam sterilization.

Mechanical Properties of Raw Filaments and Printed Specimens: Effects of Fiber Reinforcements and Process Parameters

3D printing of semicrystalline polypropylene: towards eliminating warpage of printed objects

Designing 3D printable polypropylene: Material and process optimisation through rheology

Printability and Warpage Evaluation of Polypropylene/Nano Precipitated Calcium Carbonate Composite Prepared by Extrusion-Based 3D Printing

Effects of printed bead volume on thermal history, polymer degree of crystallinity and mechanical properties in large scale additive manufacturing.

Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes

On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties

Mechanical Characteristics of Thermoplastic Polymers for 3d Printed Hybrid Structures

Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review

Structure and Properties of Biodegradable Polymer Materials for Fused Deposition Modeling 3D Printing

The Influence of Selected Fillers on the Functional Properties of Polycarbonate Dedicated to 3D Printing Applications

The impact of the glass microparticles features on the engineering response of isotactic polypropylene in material extrusion 3D printing

Effects of Printing Temperature and Filling Percentage on the Mechanical Behavior of Fused Deposition Molding Technology Components for 3D Printing

Material property characterization of 3D printed polypropylene wood plastic composites

Structure-Processing-Property Relationships of 3D Printed Porous Polymeric Materials