Abstract:In this study, waste thermocol sheets are used to synthesize activated carbon (AC) for the electrochemical detection of ammonia in an aqueous solution. The AC is characterized for its morphology, structure, and chemical composition via standard characterization techniques. AC shows promise for detecting ammonia in aqueous solutions due to its high adsorption capacity from large surface area and porosity. The electrochemical approach used to detect ammonia (NH 3 ) in electrolyte solutions uses an AC electrode and is based mostly on the electro-oxidative conversion of ammonia species at the electrode's interface. AC electrodes fabricated on flexible conductive fabric (CF) are used for the electrochemical detection of ammonia at pH 6. The electrochemical sensing of ammonia in aqueous solutions involves its oxidation on the electrode's surface. Cyclic Voltammetry (CV) experiments were conducted over a pH range of 5 to 8, revealing optimal current responses at pH 6. Therefore, phosphate-buffered saline (PBS) at pH 6.0 was employed for all electrochemical analyses. V arious concentrations of ammonia (10–100 ppm) were investigated within a voltage window of −0.3 V to 0.3 V, with current signals increasing proportionally with ammonia concentration. The limits of detection (LOD) and quantification (LOQ) were determined to be 28.55 ppm and 86.54 ppm, respectively. An incubation period of 3 min was observed for ammonia concentrations ranging from 0 to 40 ppm. Selectivity evaluations were conducted by assessing interference effects from ethanol (E), methanol (M), toluene (T), and uric acid (UA), revealing ammonia's distinctive peak, indicative of superior selectivity. Notably, the electrode exhibited remarkable stability, retaining approximately 95 % of the original signal over a 5-week duration. The reproducibility of the fabricated electrodes shows significant results. The repeatability was performed at room temperature in a buffer solution of pH 6 and at a 40-ppm concentration of ammonia and has shown almost similar results. Therefore, the fabricated AC sensing electrode has shown prominent stability, reproducibility, and repeatability. These sensing electrodes can be very beneficial for sensing applications.

Amine-functionalized activated carbon for 2-chloroethyl phenyl sulphide (2-CEPS) sensing using a portable electrochemical circuit

A Novel Electrochemical Sensor for Chlorophenols Based on the Enhancement Effect of Al-doped Mesoporous Cellular Foam

Transformation of waste thermocol into activated carbon for electrochemical detection of ammonia in an aqueous solution

Highly sensitive electrochemical sensor based on pyrrolidinium ionic liquid modified ordered mesoporous carbon paste electrode for determination of carbendazim

Activated carbon based paste electrodes for the simultaneous and effective detection of divalent cadmium and lead ions in wastewater

Thiol-based chemically modified carbon screen-printed electrode for simultaneous quantification of trace level Pb(II) and Cd(II)

Designing ferrocene biphenyl pyridine modified electrode towards the non-enzymatic electrochemical detection of catechol

A Novel Amperometric Biosensor Based on Single Walled Carbon Nanotubes with Acetylcholine Esterase for the Detection of Carbaryl Pesticide in Water

Molecular imprinting electrochemical sensor based on hollow spherical PProDOT-2CH2OH and chitosan-derived carbon materials for highly sensitive detection of chloramphenicol

Fabrication of a graphite-paraffin carbon paste electrode and demonstration of its use in electrochemical detection strategies

CeO2 and PEDOT:PSS modified conducting paper for organophosphate pesticide detection

COOH-MWCNT connected COF and chemical activated CTF as a novel electrochemical sensing platform for simultaneous detection of acetaminophen and p-aminophenol

Electrochemical sensor based on N-doped carbon dots decorated with manganese oxide nanospheres for simultaneous detection of <i>p</i>-aminophenol and paracetamol

Highly sensitive electrochemical sensor for chloramphenicol based on MOF derived exfoliated porous carbon

Development of aptasensor for chlorpyrifos detection using paper-based screen-printed electrode

A novel electrochemical sensor for simultaneous determination of 2,4-dichlorophenol and 3-chlorophenol

Nanostructured cadmium sulfide-modified screen-printed carbon electrode based electrochemical sensor for highly efficient quantification of chlorpyrifos pesticide in water and soil samples

Anthraquinone/activated carbon electrochemical sensor and its application in acetaminophen analysis

A Nafion/AChE-cSWCNT/MWCNT/Au-based amperometric biosensor for the determination of organophosphorous compounds

Ultrasensitive detection of chloramphenicol in water using functionalized polymers with an aluminium organic framework

Advanced Electrochemical Detection of 2,4-dichlorophenol in Water with Molecularly Imprinted Chitosan Stabilized Gold Nanoparticles