Abstract:Highlights • The thermoelectric performance of p-type half-metallic full-Heusler Mn 2 VAl was enhanced by introducing antisite defects and partial substitution. • First-principles calculations predicted that optimization of f AD and Si partial substitution increased the S of Mn 2 VAl. • Mn 2 VAl 1- x Si x polycrystalline samples with different f AD were successfully prepared. • Mn 2 VAl 0.96 Si 0.04 with f AD = 33 % achieved a maximum PF = 4.5×10 −4 W m −1 K −2 and a maximum zT = 3.4×10 −2 at 767 K. A half-metallic full-Heusler Mn 2 VAl alloy is a potential p-type thermoelectric material that can directly generate electricity from waste heat via the Seebeck effect. For practical use, the Seebeck coefficient S of Mn 2 VAl should be increased while maintaining a high electrical conductivity σ from its half-metallic character. Herein, we achieved this objective through antisite defect engineering. Theoretically, it was predicted that the S was maximized by regulating partial density of states of majority-spin sp-electrons through the control of the fraction of antisite defect, f AD , between V and Al atoms in Mn 2 VAl. Experimentally, a significant increase in S and a slight decrease in σ were observed for an Mn 2 VAl sample with an optimal f AD = 33 %, enhancing the thermoelectric power factor PF by 2.7 times from an Mn 2 VAl sample with f AD = 14 %. Furthermore, we combined the antisite defect engineering with a partial substitution method. An Mn 2 V(Al 0.96 Si 0.04 ) sample with f AD = 33 % exhibited the highest PF = 4.5×10 −4 W m −1 K −2 at 767 K among the samples. The maximum dimensionless figure-of-merit zT of the Mn 2 V(Al 0.96 Si 0.04 ) sample with f AD = 33 % was measured to be 3.4×10 −2 at 767 K, which is the highest among the p-type half-metallic full-Heusler alloys. Graphical abstract Download : Download high-res image (159KB) Download : Download full-size image

Achieving Compatible p/n-Type Half-Heusler Compositions in Valence Balanced/Unbalanced Mg 1- x V x NiSb

Half-Heusler compounds for thermoelectric energy conversion

Effects of Fe/Ni ratio in double half Heusler compositionHfFe1-xNixSb

Design of High‐Performance Disordered Half‐Heusler Thermoelectric Materials Using 18‐electron Rule

Thermoelectric Performance of Half-Heusler Compounds TiNiSn and TiCoSb

Power generation from n-type NbCo1−xNixSn and p-type NbFe1−xMnxSb ternary half-Heusler compounds: from materials development to module fabrication

Enhancement of the Thermoelectric Performance of Half-Metallic Full-Heusler Mn2VAl Alloys Via Antisite Defect Engineering and Si Partial Substitution

Half-Heusler Compounds: Promising Materials For Mid-To-High Temperature Thermoelectric Conversion

Enhancement of the thermoelectric performance of half-metallic full-heusler Mn 2 VAl alloys via antisite defect engineering and Si partial substitution

Enhancing the Thermoelectric Properties via Modulation of Defects in P‐Type MNiSn‐Based (M = Hf, Zr, Ti) Half‐Heusler Materials

High Performance P-Type Half-Heusler Thermoelectric Materials

Half Heusler Alloys for Efficient Thermoelectric Power Conversion

Improving thermoelectric performance of TiNiSn by mixing MnNiSb in the half-Heusler structure

Thermoelectric Properties and N - to P -Type Conversion of Co-Doped ZrNiSn-Based Half-Heusler Alloys

Systematic study of stable palladium and nickel based half-Heusler compounds for thermoelectric generators

Thermoelectric performance of p-type half-Heusler alloys ScMSb (M = Ni, Pd, Pt) by ab initio calculations

Thermoelectric Properties of N-Type Half-Heusler Compounds (Hf0.25zr0.75)1–xnbxnisn

Thermoelectric Properties of N-Type Half-Heusler NbCoSn with Heavy-Element Pt Substitution

Opening the Bandgap of Metallic Half‐Heuslers via the Introduction of d–d Orbital Interactions

Improved Thermoelectric Performance of N-Type Half-Heusler MCo1-xNixSb (M = Hf, Zr)

In-gap Electronic States Responsible for the Excellent Thermoelectric Properties of Ni-based Half-Heusler Alloys