Abstract:This study addresses the axial compressive performance of welded hollow spherical (WHS) joints with external triangular ribs. External triangular ribs are able to postpone the local buckling of the joint during axial loading, and thus strengthen the compressive capacity of it. A simplified analytical model is proposed to elucidate the stress distribution on the hollow sphere of axial-loaded WHS joints with external triangular ribs. Then a simplified solution for the yield strength of axial-loaded WHS joints is deduced based on the elastic thin shell theory. The simplified solution indicates that the yield strength of WHS joints with external triangular ribs can be expressed by a coefficient related to the specifications of the ribs and the joints multiply by that of WHS joints without external ribs. Compression tests on 6 full-scale specimens of WHS joints with varied configurations of triangular ribs are conducted. It shows that the failure mode and the strength enhancement of the specimens vary as the specification of the triangular ribs change, and the triangular ribs enhance the strength of the joints up to 77 %. A refined FE model is established and calibrated against the findings from the experiments. Parametric studies on the design parameters which may affect the compressive response of the WHS joints with triangular ribs are fully investigated. It is shown that the compressive yield strength of the joint rises with the increase of the number, height and thickness of the triangular ribs, and decreases with the increase of the angle-of-elevation of the triangular ribs. It is also shown that the effect of the ratio of the diameter of the sphere to that of the steel tube on the compressive yield strength of the joint is much lighter than the others, and deemed as negligible. Regression analysis on the experimental and numerical data is carried out to obtain a practical formula for the compressive capacity of WHS joints with external triangular ribs. This formula is incorporated with the previously developed formula for the compressive capacity of WHS joints with external trapezoidal ribs, to form a general formula applicable for WHS joints with either external triangular ribs or external trapezoidal ribs.

Compression Performance of a Heavy-Duty Universal Hinged Cast Steel Support

Shear Performance Analysis of a Heavy-Duty Universal Hinged Cast Steel Support

Experimental Study and Numerical Analysis on Heavy-Duty Cast Steel Universal Hinged Supports for Large Span Structures

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Performance Analysis of Heavy Duty Cast Steel Supports for Structures with a Large Span Steel Roof

Compressive Performance of Welded Hollow Spherical Joints with External Triangular Ribs

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Performance test and Finite-element analysis of high strength concrete-filled steel tubular columns under axial compression

Ultimate Compressive Capacity of Tapered Concrete-Filled Double Skin Steel Tubular Stub Columns with Large Hollow Ratio

Ultimate Bearing Capacity of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates Subjected to Brace Compression

METHOD AND FINITE ELEMENT ANALYSIS FOR THE COMPRESSION INSTABILITY ULTIMATE LOAD OF A Z-SHAPED STIFFENED-WELED PLATE

Compression Behavior of Perforated Plates in Steel Tower Anchorage Zones of Cable-Stayed Bridges

Local and Global Interactive Buckling Capacity of Thin-Walled Box-Section Members of BS700 High-Strength Steel under Axial Compression

EXPERIMENTAL RESEARCH ON OVERALL STABILITY BEARING CAPACITY OF HIGH STRENGTH STEEL TUBE COMPONENTS

Bearing Behavior of H-Shaped Honeycombed Steel Web Composite Columns with Rectangular Concrete-Filled Steel Tube Flanges under Eccentrical Compression Load

Effects of Chord Pre-Load on Strength of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates

Analysis of the ZY6400/21/45 hydraulic support strength based on the finite element method

Improving the Compression Behaviors of Perforated Plates with Slotted Holes Using Strengthening Stiffeners

Experimental Study on Axial Compression Performance of Thin-Walled Steel Tube Lightweight Concrete Columns With Composite Section

FINITE ELEMENT ANALYSIS AND DESIGN METHOD STUDY ON THE LOCAL BUCKLING OF 460 MEGAPASCAL HIGH STRENGTH STEEL I-SECTION COLUMNS UNDER AXIAL COMPRESSION