Abstract:Optical tracking provides relatively high accuracy over a large workspace but requires line-of-sight between the camera and the markers, which may be difficult to maintain in actual applications. In contrast, inertial sensing does not require line-of-sight but is subject to drift, which may cause large cumulative errors, especially during the measurement of position. To handle cases where some or all of the markers are occluded, this paper proposes an inertial and optical sensor fusion approach in which the bias of the inertial sensors is estimated when the optical tracker provides full six degree-of-freedom (6-DOF) pose information. As long as the position of at least one marker can be tracked by the optical system, the 3-DOF position can be combined with the orientation estimated from the inertial measurements to recover the full 6-DOF pose information. When all the markers are occluded, the position tracking relies on the inertial sensors that are bias-corrected by the optical tracking system. Experiments are performed with an augmented reality head-mounted display (ARHMD) that integrates an optical tracking system (OTS) and inertial measurement unit (IMU). Experimental results show that under partial occlusion conditions, the root mean square errors (RMSE) of orientation and position are 0.04° and 0.134 mm, and under total occlusion conditions for 1 s, the orientation and position RMSE are 0.022° and 0.22 mm, respectively. Thus, the proposed sensor fusion approach can provide reliable 6-DOF pose under long-term partial occlusion and short-term total occlusion conditions.

Pose Estimation Of A Rigid Body And Its Supporting Moving Platform Using Two Gyroscopes And Relative Complementary Measurements

Absolute Attitude Estimation of Rigid Body on Moving Platform Using Only Two Gyroscopes and Relative Measurements

Body-Segment Orientation Estimation in Rider-Bicycle Interactions with an Un-Calibrated Monocular Camera and Wearable Gyroscopes

Whole-body Pose Estimation in Physical Rider-Bicycle Interactions with a Monocular Camera and a Set of Wearable Gyroscopes

Pose Estimation in Physical Human-Machine Interactions with Application to Bicycle Riding

Gyro-aided Camera-Odometer Online Calibration and Localization

Rider Trunk and Bicycle Pose Estimation with Fusion of Force/Inertial Sensors

Robust And Accurate Multiple-Camera Pose Estimation Toward Robotic Applications

Pose Estimation for Spherical Robot with Kinematics-Based Encoder-Inertial Odometry

VID-Fusion: Robust Visual-Inertial-Dynamics Odometry for Accurate External Force Estimation

Dynamic Rider/Bicycle Pose Estimation With Force/Imu Measurements

Rider/bicycle pose estimation with IMU/seat force measurements

Relative Pose Estimation Algorithm with Gyroscope Sensor.

Whole-Body Pose Estimation in Human Bicycle Riding Using a Small Set of Wearable Sensors

Invariant Cubature Kalman Filtering-Based Visual-Inertial Odometry for Robot Pose Estimation

Attitude Estimation of Rigid Bodies Using MEMS Inertial Sensors

Stereo-inertial Pose Estimation and Online Sensors Extrinsic Calibration.

State Estimation Using Single Body-Frame Bearing Measurements

Pose, Velocity and Landmark Position Estimation Using IMU and Bearing Measurements

Relative Pose for Nonrigid Multi-Perspective Cameras: The Static Case

An Inertial and Optical Sensor Fusion Approach for Six Degree-Of-Freedom Pose Estimation