Abstract:Human motion sensing based on wearable sensors could be viewed as a multi-objects tracking issue of human body joints. Sensor drift errors and distortion are the main challenges of the tracking accuracy of human motion. Traditional filtering and fusion methods, such as Kalman filter, can to some extent reduce the instantaneous error but cannot avoid sensor drift fundamentally. Physical characteristics of human body should be considered and human motion models should be exhibited to describe human motions. The existing models such as skeleton model and cylinder model are either too simple or too complicated for practical applications. In this study, we put forward a geometrical kinematic characteristics based human motion model. The whole human body is viewed as an articulated skeleton and Denavit–Hartenberg convention is adopted to describe the forward kinematics structure. Theoretical analysis is conducted with the derivation of Posterior Cramer–Rao Lower Bound (PCRLB) in human movement scenes based on proposed model. Significant superiority is shown in simulation results. An experiment on human lower limb motions is carried out to verify the validity of the proposed human motion model in practice applications, from the angles of both capturing accuracy and energy consumption. The capturing accuracy has an obvious increase in the testing results, with acceptable energy consumption. It is far more efficient than traditional methods.

Pose Estimation in Physical Human-Machine Interactions with Application to Bicycle Riding

Whole-body Pose Estimation in Physical Rider-Bicycle Interactions with a Monocular Camera and a Set of Wearable Gyroscopes

Whole-Body Pose Estimation in Human Bicycle Riding Using a Small Set of Wearable Sensors

Rider Trunk and Bicycle Pose Estimation with Fusion of Force/Inertial Sensors

Body-Segment Orientation Estimation in Rider-Bicycle Interactions with an Un-Calibrated Monocular Camera and Wearable Gyroscopes

Dynamic Rider/Bicycle Pose Estimation With Force/Imu Measurements

Rider/bicycle pose estimation with IMU/seat force measurements

An Integrated Physical-Learning Model of Physical Human-Robot Interactions with Application to Pose Estimation in Bikebot Riding

An Integrated Physical-Learning Model Of Physical Human-Robot Interactions: A Bikebot Riding Example

Modeling Of Rider-Bicycle Interactions With Learned Dynamics On Constrained Embedding Manifolds

Efficient Multi-person Hierarchical 3D Pose Estimation for Autonomous Driving

Pose Estimation Of A Rigid Body And Its Supporting Moving Platform Using Two Gyroscopes And Relative Complementary Measurements

Dynamic modeling and balance control of human/bicycle systems

Real-Time Human Motion Capture Based on Wearable Inertial Sensor Networks

Geometrical kinematic modeling on human motion using method of multi-sensor fusion

Whole-Body Human Kinematics Estimation using Dynamical Inverse Kinematics and Contact-Aided Lie Group Kalman Filter

Leveraging Two Kinect Sensors for Accurate Full-Body Motion Capture

Upper Body Pose Estimation Using Wearable Inertial Sensors and Multiplicative Kalman Filter

Hybrid 3D Human Pose Estimation with Monocular Video and Sparse IMUs

Full-body Motion Capture for Multiple Closely Interacting Persons.

Absolute Attitude Estimation of Rigid Body on Moving Platform Using Only Two Gyroscopes and Relative Measurements