Abstract:Background: Accurate and portable respiratory parameter measurements are critical for properly managing chronic obstructive pulmonary diseases (COPDs) such as asthma or sleep apnea, as well as controlling ventilation for patients in intensive care units, during surgical procedures, or when using a positive airway pressure device for sleep apnea. Objective: The purpose of this research is to develop a new nonprescription portable measurement device that utilizes relative humidity sensors (RHS) to accurately measure key respiratory parameters at a cost that is approximately 10 times less than the industry standard. Methods: We present the development, implementation, and assessment of a wearable respiratory measurement device using the commercial Bosch BME280 RHS. In the initial stage, the RHS was connected to the pneumotach (PNT) gold standard device via its external connector to gather breathing metrics. Data collection was facilitated using the Arduino platform with a Bluetooth Low Energy connection, and all measurements were taken in real time without any additional data processing. The device's efficacy was tested with 7 participants (5 men and 2 women), all in good health. In the subsequent phase, we specifically focused on comparing breathing cycle and respiratory rate measurements and determining the tidal volume by calculating the region between inhalation and exhalation peaks. Each participant's data were recorded over a span of 15 minutes. After the experiment, detailed statistical analysis was conducted using ANOVA and Bland-Altman to examine the accuracy and efficiency of our wearable device compared with the traditional methods. Results: The perfused air measured with the respiratory monitor enables clinicians to evaluate the absolute value of the tidal volume during ventilation of a patient. In contrast, directly connecting our RHS device to the surgical mask facilitates continuous lung volume monitoring. The results of the 1-way ANOVA showed high P values of .68 for respiratory volume and .89 for respiratory rate, which indicate that the group averages with the PNT standard are equivalent to those with our RHS platform, within the error margins of a typical instrument. Furthermore, analysis utilizing the Bland-Altman statistical method revealed a small bias of 0.03 with limits of agreement (LoAs) of -0.25 and 0.33. The RR bias was 0.018, and the LoAs were -1.89 and 1.89. Conclusions: Based on the encouraging results, we conclude that our proposed design can be a viable, low-cost wearable medical device for pulmonary parametric measurement to prevent and predict the progression of pulmonary diseases. We believe that this will encourage the research community to investigate the application of RHS for monitoring the pulmonary health of individuals.

Elimination of Drifts in Long-Duration Monitoring for Apnea-Hypopnea of Human Respiration.

Elimination of ECG Baseline Drift Using Meyer Wavelet

Wi-Tracker: Monitoring Breathing Airflow with Acoustic Signals

Unobtrusive Monitoring of Cardiorespiratory Signals During Sleep Based on PVDF Sensor and Singular Spectrum Analysis.

Contactless Respiration Monitoring Using Ultrasound Signal With Off-The-Shelf Audio Devices

An Unobtrusive and Non-Contact Method for Respiratory Measurement with Respiratory Region Detecting Algorithm Based on Depth Images.

Remote Respiratory Variables Tracking With Biomedical Radar-Based IoT System During Sleep

A Smart Real-Time Human Respiratory Monitoring System Based on a High-Performance Flow Sensor and an Accurate Breathing Rate Recognition Algorithm

Paper-Based Humidity Sensor for Respiratory Monitoring

Reliable Breathing Tracking With Wearable Mask Device

A Comparative Study of Accuracy in Major Adaptive Filters for Motion Artifact Removal in Sleep Apnea Tests.

Respiratory Rate Monitoring System Based on Inorganic Halide Perovskite Humidity Sensor

Non-contact and non-constraining monitoring of the respiratory rate including sleep disordered breathing using ultra-wideband radar

Leveraging Attention-reinforced UWB Signals to Monitor Respiration During Sleep

Thermal Imaging and Radar for Remote Sleep Monitoring of Breathing and Apnea

Continuous Critical Respiratory Parameter Measurements Using a Single Low-Cost Relative Humidity Sensor: Evaluation Study

Measuring Uncertainty During Respiratory Rate Estimation Using Pressure-Sensitive Mats

Towards Accurate, Cost-Effective, Ultra-Low-Power and Non-Invasive Respiration Monitoring: A Reusable Wireless Wearable Sensor for an Off-the-Shelf KN95 Mask

A Two-Stage Method for Real-Time Baseline Drift Compensation in Gas Sensors

Collaborative Three-Tier Architecture Non-contact Respiratory Rate Monitoring using Target Tracking and False Peaks Eliminating Algorithms

Random-Noise Denoising and Clutter Elimination of Human Respiration Movements Based on an Improved Time Window Selection Algorithm Using Wavelet Transform.