Abstract:In this work, the influence of a small-molecule material, tris(8-hydroxyquinoline) aluminum (Alq(3)), on bulk heterojunction (BHJ) polymer solar cells (PSCs) is investigated in devices based on the blend of poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) and [6,6] phenyl-C(61) butyric acid,methyl ester (PCBM) By doping Alq(3) into MEH PPV PCBM solution, the number of MEH-PPV excitons can be effectively increased due to the energy transfer from Alq(3) to MEH-PPV, which probably induces the increase of photocurrent generated by excitons dissociation However, the low carrier mobility of Alq(3) is detrimental to the efficient charge transport, thereby blocking the charge collection by the respective electrodes The balance between photon absorption and charge transport in the active layer plays a key role in the performance of PSCs For the case of 5 wt % Alq(3) doping, the device performance is deteriorated rather than improved as compared with that of the undoped device On the other hand, we adopt Alq(3) as a buffer layer instead of commonly used LiF All the photovoltaic parameters are improved, yielding an 80% increase in power conversion efficiency (PCE) at the optimum thickness (1 nm) as compared with that of the device without any buffer layer Even for the 5 wt % Alq(3) doped device, the PCE has a slight enhancement compared with that of the standard device after modification with 1 nm (or 2 nm) thermally evaporated Alq(3) The performance deterioration of Alq(3) doped devices can be explained by the low solubility of Alq(3), which probably deteriorates the bicontinuous D-A network morphology, while the performance improvement of the devices with Alq(3) as a buffer layer is attributed to the increased light harvesting, as well as blocking the hole leakage from MEH-PPV to the aluminum (Al) electrode due to the lower highest occupied molecular orbital (HOMO) level of Alq(3) compared with that of MEH-PPV

Al-Doping Effects on the Photovoltaic Performance of Inverted Polymer Solar Cells

Enhanced Performance And Stability Of Polymer Solar Cells By In Situ Formed Alox Passivation And Doping

Aluminum Doping Effects on Interface Depletion Width of Low Temperature Processed ZnO Electron Transport Layer-Based Perovskite Solar Cells

Investigating the MgAl-Doping N-Type ZnO(MgAlZnO) Metal Oxide Film Used As the ITO Cathode Buffer Layer in the Inverted Polymer Solar Cell

Efficiency boosting of inverted polymer solar cells with a polyvinylpyrrolidone-modified Al-doped ZnO electron transport layer

Effects of Al Doping on Defect Behaviors of ZnO Thin Film As a Photocatalyst

Improved Open-Circuit Voltage of AZO/CsPbBr3/Carbon Structure Perovskite Solar Cells by an Al-Doped ZnO Electron Transport Layer

Improving the Performance of Inverted Organic Solar Cells by Adjusting the Concentration of Precursor Solution of Al-doped ZnO

Doping ZnO with Water/Alcohol-Soluble Small Molecules As Electron Transport Layers for Inverted Polymer Solar Cells.

Influence of Doped PEDOT ∶PSS on Performance of Polymer Solar Cells

Effect Of Doping On The Short-Circuit Current And Open-Circuit Voltage Of Polymer Solar Cells

Improving Electron Extraction Ability and Device Stability of Perovskite Solar Cells Using a Compatible PCBM/AZO Electron Transporting Bilayer.

Light Harvesting and Carrier Transfer Enhancement of All-Inorganic CsPbBr3 Perovskite Solar Cells by Al-doped ZnO Nanorod Arrays

PEIE Doped ZnO As a Tunable Cathode Interlayer for Efficient Polymer Solar Cells

Unraveling the Effect of Polymer Dots Doping in Inverted Low Bandgap Organic Solar Cells

Effect of Al Doping on Performance of ZnO Thin Film Transistors

Enhancing The Photovoltaic Performance Of Planar Heterojunction Perovskite Solar Cells By Doping The Perovskite Layer With Alkali Metal Ions

Gradient Al-doped ZnO multi-buffer layers: Effect on the photovoltaic properties of organic solar cells

Effective Light Trapping Enhanced Near-Uv/blue Light Absorption in Inverted Polymer Solar Cells Via Sol–gel Textured Al-doped ZnO Buffer Layer

High‐Performance Organic‐Silicon Heterojunction Solar Cells by Using Al‐Doped ZnO As Cathode Interlayer

Influence of Small-Molecule Material on Performance of Polymer Solar Cells Based on MEH-PPV:PCBM Blend