Abstract:Cr-doped and undoped lithium zinc titanate (LZTO), Li2ZnCrxTi3−xO8 (x = 0, 0.1, 0.3, 0.5) has been prepared as alternative anode using a simple and facile high-temperature solid-state ball-milling route followed by calcination in the air atmosphere. The cubic spinel structure with P4332 space group is confirmed through X-ray Diffraction (XRD) for all compositions indicating doping of Cr3+ does not cause any changes within the lattice as well as maintain the phase structure up to an optimized doping. The study of morphology and distribution of the particles in the synthesized LZTO and doped LZTO compositions are carried out via scanning electron microscopy and transmission electron microscopy (TEM). It reveals the formation of polyhedron-shaped spherical facets in the sub-micron to nanometer range as observed by TEM. The particle size reduces toward the nanometer range as the amount of Cr doping increases and it also decreases the agglomeration of particles. All the samples doped with Cr indicate good electrochemical performance as compared to pristine LZTO. Sample Li2ZnCr0.3Ti2.7O8 doped with Cr content 0.3 displays higher discharge capacity, better cyclability, and lower polarization among all other Cr doped samples. Li2ZnCr0.3Ti2.7O8 delivered excellent rate performances attaining capacities of 251.73 ± 4, 184.34 ± 5, 157.42 ± 5, and 119.03 ± 4 mAh g−1 at 0.1C, 0.5C, 1, and 2C, respectively, which is higher than the pristine LZTO sample. Electrochemical impedance spectroscopy shows Li2ZnCr0.3Ti2.7O8 acquired a lower value of charge-transfer resistance and the fastest Li-ion diffusivity which enhances its capacity at higher current rates and makes it suitable as an alternative anode for lithium-ion batteries.

Investigation of N-doped Carbon-Coated Lithium Zinc Titanate Using Chitin As a Carbon Source for Lithium-Ion Batteries

High performance Li2ZnTi3O8 coated with N-doped carbon as an anode material for lithium-ion batteries

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Facile synthesis of n-doped carbon coated lithium zinc titanate particles towards enhanced performance in lithium-ion battery applications

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Highly Crystalline Lithium Titanium Oxide Sheets Coated with Nitrogen-Doped Carbon Enable High-Rate Lithium-Ion Batteries.

N-doped ZIF-8-derived Carbon (NC-ZIF) As an Anodic Material for Lithium-Ion Batteries

Facile and Controllable Synthesis of Nitrogen Self-Doped Chitosan-Derived Carbon for High-Performance Li-ion Batteries

Zn5(OH)6(CO3)2-assisted controlled fabrication of microcrystalline cellulose-derived hierarchical porous carbon for high-performance lithium storage

Surface Structure and High-Rate Performance of Spinel Li4ti5o12 Coated with N-Doped Carbon As Anode Material for Lithium-Ion Batteries

Nitrogen-Doped Hollow Carbon Nanospheres for High-Performance Li-Ion Batteries.

Carbon-Coated Nano-Sized Li4ti5o12 Nanoporous Micro-Sphere As Anode Material for High-Rate Lithium-Ion Batteries

Li2TiO3 and Li2ZrO3 Co-Modification LiNi0.8Co0.1Mn0.1O2 Cathode Material with Improved High-Voltage Cycling Performance for Lithium-Ion Batteries

Improved Lithium Storage Performance of NaTi2(PO4)(3)/C Composite Connected by Carbon Nanotubes

Sn3O4 Nanosheets with N-doped Carbon Coating for High Performance Lithium Storage

Enhanced Lithium Storage Performance of Nanostructured NaTi2(PO4)3 Decorated by Nitrogen-Doped Carbon

Effect of Cr doping on Li2ZnTi3O8 as alternative anode material to enhance electrochemical properties of lithium-ion batteries

Carbon coated Nb2O5 nanosheets via dopamine-induced phase transition for high-rate lithium-ion battery

Porous Hierarchical Nitrogen-doped Carbon Coated ZnFe 2 O 4 Composites as High Performance Anode Materials for Lithium Ion Batteries

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

Facile Fabrication of SiO2 Nanotubes Coated with Nitrogen-Doped Carbon Layers As High-Performance Anodes for Lithium-Ion Batteries