Abstract:Abstract Groundwater treatment sludge is a type of solid waste with 9.0–28.9% wt.% Fe content and is precipitated in large quantity from backwash wastewater in groundwater treatment. The sludge is mainly composed of fine particles containing Fe, Si and Al oxides, such as ferrihydrite, quartz and boehmite. The Fe oxides mostly originate from the oxidation of ferrous Fe in groundwater, whilst the silicate/aluminium compounds mainly originate from the broken quartz sand filter in the backwash step. In general, the sludge is firstly coagulated, dewatered by filter pressing and finally undergoes harmless solidification before it is sent to landfills. However, this process is costly (approximately US$66.1/t) and complicated. In this study, groundwater treatment sludge was effectively recycled to prepare novel erdite-bearing particles via a one-step hydrothermal method by adding only Na 2 S·9H 2 O. After hydrothermal treatment, the quartz and boehmite of the sludge were dissolved and recrystallised to sodalite, whilst ferrihydrite was converted to an erdite nanorod at 160 °C and a hematite at 240 °C. SP160 was prepared as fine nanorod particles with 200 nm diameter and 2–5 μm length at a hydrothermal temperature of 160 °C. Nearly 100% OTC and its derivatives in pharmaceutical manufacture wastewater were removed by adding 0.1 g SP160. The major mechanism for the removal was the spontaneous hydrolysis of erdite in SP160 to generate Fe oxyhydroxide and use many hydroxyl groups for coordinating OTC and its derivatives. This study presents a novel method for the resource reutilisation of waste groundwater treatment sludge and reports efficient erdite-bearing particles for pharmaceutical manufacture wastewater treatment.

Preparation of Iron Phosphate from Sludge Sourced from the Electrocoagulation Treatment of Source-Separated Urine

Theoretical and Practical Foundations of the Selective Separation of Phosphate Ions from Phosphate Ores with a High Content of Iron Impurities with the Recirculation Method

Preparation of Iron Phosphate Battery Materials from Industrial Ferrous Sulfate Waste by Liquid Phase Method

Phosphate removal by ex-situ generated Fe (hydr)oxides from scrap iron electrocoagulation: the critical role of coprecipitation

Preparation of Doped Iron Phosphate by Selective Precipitation of Iron from Titanium Dioxide Waste Acid

Preparation of High-Purity Nano-Iron Phosphate from Titanium-Extraction Tailings by Co-Leaching Synergetic Ultrasonic-Enhanced Precipitation Process

Optimizing iron removal from sewage sludge ash for enhanced phosphate fertilizer bioavailability

Fractionation and Identification of Iron-Phosphorus Compounds in Sewage Sludge

Efficient and Selective Recovery of Iron Phosphate from the Leachate of Incinerated Sewage Sludge Ash by Thermally Induced Precipitation

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Phosphate Removal from Source Separated Urine by Electrocoagulation Using Iron Plate Electrodes

Adsorptive removal of phosphate from aqueous solution using waste iron sludge

Upcycling of Fe-bearing sludge: preparation of erdite-bearing particles for treating pharmaceutical manufacture wastewater

Basic Research on Selective Extraction of Iron from Titanium Dioxide Waste Acid to Prepare Iron Phosphate Precursors

Recovery of iron phosphate from secondary sludge by ascorbic and citric acids

Preparation of Iron Salt-Modified Sludge Biochar and Its Uptake Behavior for Phosphate

FePO4 preparation and residue recycling by co-processing of steelmaking slag and steel pickling waste liquor: Comprehensive utilization of metallurgical wastes

Study of Precursor Preparation of Battery-Grade Lithium Iron Phosphate

Recovery of Iron Resources from Wet-Process Phosphoric Acid and the Preparation of High Purity Ferrous Oxalate: Solvent Extraction and Photochemical Reaction

Study on Efficiency of Freshly Hydrated Iron Oxide for Phosphate Removal from Water

Facile and inexpensive preparation method of iron phosphate from laterite residue