Abstract:Within presented paper complex kinetic analysis of waste wood solar pyrolysis with fuel characterisation has been presented. Thermogravimetric (TGA) data were obtained for heating rates denoted in solar pyrolysis experiments: 5, 10, 15 and 20 K/min. Study presents alternative approach to lignocellulosic biomass kinetics using NETZSCH Kinetics Neo (v. 2.1.2.2) software. TGA data were enriched with the gas analyser indications and experiments results from solar pyrolysis examined on self-designed laboratory reactor. Presented methodology consisted of <a class="workspace-trigger" href="#e0005">(1)</a> isoconversional analysis: Friedman, Kissinger-Akahira-Sunose and Ozawa-Flynn-Wall analysis yielding apparent activation energies Eα, varying from 185.37 to 375.56 kJ/mol at reaction extent 0.1–0.9, <a class="workspace-trigger" href="#e0010">(2)</a> reaction model identification with generalised master plot method which showed that decomposition was driven by three-dimensional diffusion (D3) with transition to three-dimensional phase boundary (R3) and reaction order based models (F1,F2,Fn) at the end of conversion. Finally, <a class="workspace-trigger" href="#e0015">(3)</a> kinetic model construction was performed based on experiments observations, resulting in modelling of 3 main reactions of pyrolysis products formations. The most intensive condensable release was observed between 250 and 440 °C what correlated with CO2 release described by dominant two-step D3-F2 consecutive reaction with activation energies and logarithmic pre-exponential factors 159.92 kJ/mol, 10.44 log(1/s) and 256.78 kJ/mol, 19.05 log(1/s) for first and second step respectively. CO formation obeyed R3 reaction mechanism with activation energy 181 kJ/mol and pre-exponential factor 12.16 log(1/s). Last stage of pyrolysis, charring, was described by two-step consecutive reaction Fn(n = 3.463)-F2 resulting in formation of CH4 and H2 with activation energies and pre-exponential factors of 249.72 kJ/mol, 15.87 log(1/s) and 162 kJ/mol, 6.61 log(1/s) respectively. Kinetic models and isoconversional methods results were tested using Fisher-Snedecor test. Presented methodology was compared with traditional three pseudo-component wood pyrolysis model and discussed.

Error Evaluation on Pyrolysis Kinetics of Sawdust Using Iso-Conversional Methods

Kinetics of Bamboo Pyrolysis

Insight into Pyrolysis Kinetics of Lignocellulosic Biomass: Isoconversional Kinetic Analysis by the Modified Friedman Method

Understanding pyrolysis mechanisms of pinewood sawdust and sugarcane bagasse from kinetics and thermodynamics

KINETIC STUDY OF PINE SAWDUST PYROLYSIS VIA TG/DTG ANALYSIS

Data Smoothing and Isoconversional Kinetic Analysis

Pyrolysis Kinetic Analysis of Forest Combustible Material: An Improved Method for Optimization Calculation

Combustion Kinetics of Pine Sawdust Biochar

Isoconversional kinetics and characteristics of combustion on hydrothermally treated biomass

A Kinetic Study of the Nonisothermal Pyrolysis of Wood

Kinetic Analysis of Wheat Straw Pyrolysis Using Isoconversional Methods

Comparison of wood pyrolysis kinetic data derived from thermogravimetric experiments by model-fitting and model-free methods

Thermogravimetric Analysis of Pyrolysis Characteristics of Biomass

Pyrolysis Kinetics Mechanism Analysis of Sawdust by Sestak-Berggren Function

Isoconversional Kinetic Analysis of Sweet Sorghum Bagasse Pyrolysis by Modified Logistic Mixture Model

Combustion Kinetics of Biochar from Fast Pyrolysis of Pine Sawdust: Isoconversional Analysis

Kinetic modelling of waste wood devolatilization during pyrolysis based on thermogravimetric data and solar pyrolysis reactor performance

Pyrolysis Characteristics and Determination of Kinetic and Thermodynamic Parameters of Raw and Torrefied Chinese Fir

Kinetics of catalytic biomass pyrolysis using Ni-based functional materials

Insight into kinetic and Thermodynamic Analysis methods for lignocellulosic biomass pyrolysis

Evaluation of Kinetic and Thermodynamic Parameters of Pyrolysis and Combustion Processes for Bamboo Using Thermogravimetric Analysis