Abstract:Wrinkling in unsupported region is a worthy problem to be solved in sheet metal forming process. Sheet hydroforming is advantageous in the prevention of unsupported wrinkles. However, the simply increasing of liquid pressure is not enough to suppress the wrinkling even though with the occurrence of “reverse bulging effect” .11Normally, the unsupported areas of sheet metals during hydroforming are easy to be bulged along the reverse direction of deep drawing, this phenomenon can be regarded as a “reverse bulging effect”. In order to predict and control the wrinkling quantitatively in unsupported region for thin-walled shells with curved surface, a theoretical model on critical wrinkling stress was proposed by considering proper “reverse bulging effect” based on energy method. The influence of liquid pressure and other parameters on the critical wrinkling stress was analyzed. The critical loading path of the liquid pressure to control wrinkling was obtained by combining critical wrinkling stresses and circumferential stresses. An experimental setup for an extremely thin-walled shell with semi-ellipsoidal geometry was designed and manufactured to verify the theoretical model. It is found that at a certain punch stroke, the magnitude of the critical wrinkling stress increases and that of circumferential compressive stress decreases with the improvement of the liquid pressure. The critical loading path can be utilized to get well formed shells with a ratio of thickness to diameter equals 0.27% in the experiments. The proposed method can be applied to predict and control wrinkling in unsupported region for hydroforming of thin-walled shell with high accuracy and considerably reduced simulation time.

Evaluation on Dimpling and Geometrical Profile of Curved Surface Shell by Hydroforming with Reconfigurable Multipoint Tool

Deformation of Large Curved Shells Using Double-Sided Pressure Sheet Hydroforming Process

Enhancement on plastic deformation of curved surface shell by sheet hydroforming with optimized pre-bulging process

Enhancement on deformation uniformity of double curvature shell by hydroforming process and curved blank-holder surface

Multi-directional Sheet Hydroforming of Components with Complex Curved Surface

Deformation Behavior of Curved Shells in Multi-Point Forming with Asymmetric Punches

Analysis and experiment on wrinkling suppression for hydroforming of curved surface shell

Multi-point sandwich forming of a spherical sector with tool-shape compensation

Welded Double Sheet Hydroforming of Complex Hollow Component

Investigation into the Innovative Sheet Hydroforming and the Effect of Key Process Parameters

Mechanism Analysis on Thickness Distribution of Aluminum Alloy Hemispherical Shells in Double-Sided Sheet Hydroforming

Investigations on a Novel Double-Surface Single Point Incremental Forming Process for Sharp-Corner Features

Simulating sheet metal double-sided hydroforming by using thick shell element

Analysis of wrinkling during sheet hydroforming of curved surface shell considering reverse bulging effect

Study on the Deformation Characteristics of the Sheet Hydroforming with a Movable Die

The mechanics of multi-point sandwich forming

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Formability Influenced by Process Loading Path of Double Sheet Hydroforming

Process window calculation and pressure locus optimization in hydroforming of conical box with double concave cavities

A Technology to Improve Formability for Rectangular Cross Section Component Hydroforming

Experimental and Finite Element Investigation of Over-Bending Phenomenon in Double-Sided Incremental Forming (DSIF) of Aluminium Sheets